Composite Structures - novembre 2013

Publié:	novembre 2013

Auteur(s)	Titre	Page(s)
Suresh Kumar, R. / Ray, M. C.	Active control of geometrically nonlinear vibrations of doubly curved smart sandwich shells using 1–3 piezoelectric composites	173-187
Natarajan, S. / Ferreira, A. J. M. / Bordas, S. P. A. / Carrera, E. / Cinefra, M.	Analysis of composite plates by a unified formulation-cell based smoothed finite element method and field consistent elements	75-81
Batra, R. C. / Xiao, J.	Analysis of post-buckling and delamination in laminated composite St. Venant–Kirchhoff beams using CZM and layer-wise TSNDT	369-384
Qi, Chang / Yang, Shu / Yang, Li-Jun / Wei, Zhi-Yong / Lu, Zhen-Hua	Blast resistance and multi-objective optimization of aluminum foam-cored sandwich panels	45-57
Lopatin, A. V. / Morozov, E. V.	Buckling of a uniformly compressed rectangular SSCF composite sandwich plate	108-115
Lameiras, Rodrigo / Barros, Joaquim / Valente, Isabel B. / Azenha, Miguel	Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part I: Conception and pull-out tests	446-459
Lameiras, Rodrigo / Barros, Joaquim / Azenha, Miguel / Valente, Isabel B.	Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part II: Evaluation of mechanical behaviour	460-470
Piovan, M. T. / Ramírez, J. M. / Sampaio, R.	Dynamics of thin-walled composite beams: Analysis of parametric uncertainties	14-28
Miranda Guedes, Rui / Pereira, Celeste M. C. / Fonseca, Alexandra / Oliveira, Mónica S. A.	The effect of carbon nanotubes on viscoelastic behaviour of biomedical grade ultra-high molecular weight polyethylene	263-268
Koo, Jae-Mean / Choi, Jung-Hun / Seok, Chang-Sung	Evaluation for residual strength and fatigue characteristics after impact in CFRP composites	58-65
D'Ambrisi, Angelo / Mezzi, Marco / Caporale, Andrea	Experimental investigation on polymeric net-RCM reinforced masonry panels	207-215
Waimer, M. / Kohlgrüber, D. / Hachenberg, D. / Voggenreiter, H.	Experimental study of CFRP components subjected to dynamic crash loads	288-299
Azhari, F. / Boroomand, B. / Shahbazi, M.	Exponential basis functions in the solution of laminated plates using a higher-order Zig–Zag theory	398-407
Bilasse, M. / Oguamanam, D. C. D.	Forced harmonic response of sandwich plates with viscoelastic core using reduced-order model	311-318
Uymaz, B.	Forced vibration analysis of functionally graded beams using nonlocal elasticity	227-239
Mantari, J. L. / Guedes Soares, C.	Generalized layerwise HSDT and finite element formulation for symmetric laminated and sandwich composite plates	319-331
Fernandes, Emanuel M. / Mano, João F. / Reis, Rui L.	Hybrid cork–polymer composites containing sisal fibre: Morphology, effect of the fibre treatment on the mechanical properties and tensile failure prediction	153-162
He, Wen-ming / Chen, Wei-qiu / Qiao, Hua	In-plane vibration of rectangular plates with periodic inhomogeneity: Natural frequencies and their adjustment	134-140
Hosseini, M. / Khalili, S. M. R. / Fard, K. Malekzadeh	An indentation law for doubly curved composite sandwich panels with rigid-plastic core subjected to flat-ended cylindrical indenters	82-89
Kwon, Y. W. / Priest, E. M. / Gordis, J. H.	Investigation of vibrational characteristics of composite beams with fluid–structure interaction	269-278
Khalili, S. M. R. / Ardali, A.	Low-velocity impact response of doubly curved symmetric cross-ply laminated panel with embedded SMA wires	216-226
Azoti, W. L. / Tchalla, A. / Koutsawa, Y. / Makradi, A. / Rauchs, G. / Belouettar, S. / Zahrouni, H.	Mean-field constitutive modeling of elasto-plastic composites using two (2) incremental formulations	256-262
Gao, Liang / Sun, Yuguo / Cong, Lixin / Chen, Peng	Mechanical behaviours of composite sandwich panel with strengthened pyramidal truss cores	149-152
Hankeln, F. / Mahnken, R.	A mesoscopic model for deep drawing of carbon fibre prepregs at large strains	340-350
Ribeiro, M. C. S. / Fiúza, A. / Castro, A. C. M. / Silva, F. G. / Dinis, M. L. / Meixedo, J. P. / Alvim, M. R.	Mix design process of polyester polymer mortars modified with recycled GFRP waste materials	300-310
Rahmani, B. / Mortazavi, F. / Villemure, I. / Levesque, M.	A new approach to inverse identification of mechanical properties of composite materials: Regularized model updating	116-125
Sahoo, Rosalin / Singh, B. N.	A new inverse hyperbolic zigzag theory for the static analysis of laminated composite and sandwich plates	385-397
Upadhyay, A. K. / Shukla, K. K.	Non-linear static and dynamic analysis of skew sandwich plates	141-148
Alijani, Farbod / Amabili, Marco	Nonlinear vibrations of laminated and sandwich rectangular plates with free edges. Part 1: Theory and numerical simulations	422-436
Alijani, Farbod / Amabili, Marco / Ferrari, Giovanni / D'Alessandro, Vincenzo	Nonlinear vibrations of laminated and sandwich rectangular plates with free edges. Part 2: Experiments & comparisons	437-445
Isbilir, Ozden / Ghassemieh, Elaheh	Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites	126-133
Lubineau, Gilles / Nouri, Hedi / Roger, Frederic	On micro–meso relations homogenizing electrical properties of transversely cracked laminated composites	66-74
Araujo, A. L. / Madeira, J. F. A. / Mota Soares, C. M. / Mota Soares, C. A.	Optimal design for active damping in sandwich structures using the Direct MultiSearch method	29-34
Vandellos, T. / Huchette, C. / Carrere, N.	Proposition of a framework for the development of a cohesive zone model adapted to Carbon-Fiber Reinforced Plastic laminated composites	199-206
Zhang, Guoqi / Wang, Bing / Ma, Li / Xiong, Jian / Yang, Jinshui / Wu, Linzhi	The residual compressive strength of impact-damaged sandwich structures with pyramidal truss cores	188-198
Ekh, Johan / Schön, Joakim / Zenkert, Dan	Simple and efficient prediction of bearing failure in single shear, composite lap joints	35-44
Wu, Wangqing / Xie, Lei / Jiang, Bingyan / Ziegmann, Gerhard	Simultaneous binding and toughening concept for textile reinforced pCBT composites: Manufacturing and flexural properties	279-287
Li, Yong / Viola, Erasmo	Size effect investigation of a central interface crack between two bonded dissimilar materials	90-107
Alzahrani, Ebraheem O. / Zenkour, Ashraf M. / Sobhy, Mohammed	Small scale effect on hygro-thermo-mechanical bending of nanoplates embedded in an elastic medium	163-172
Asprone, Domenico / Auricchio, Ferdinando / Menna, Costantino / Morganti, Simone / Prota, Andrea / Reali, Alessandro	Statistical finite element analysis of the buckling behavior of honeycomb structures	240-255
Malekzadeh, P. / Bahranifard, F. / Ziaee, S.	Three-dimensional free vibration analysis of functionally graded cylindrical panels with cut-out using Chebyshev–Ritz method	1-13
Weps, Matthias / Naumenko, Konstantin / Altenbach, Holm	Unsymmetric three-layer laminate with soft core for photovoltaic modules	332-339
Godat, Ahmed / Légeron, Frédéric / Gagné, Vincent / Marmion, Benjamin	Use of FRP pultruded members for electricity transmission towers	408-421
Challamel, Noël	Variational formulation of gradient or/and nonlocal higher-order shear elasticity beams	351-368

Auteur(s)

Titre

Page(s)

Suresh Kumar, R. / Ray, M. C.

Active control of geometrically nonlinear vibrations of doubly curved smart sandwich shells using 1–3 piezoelectric composites

173-187

Natarajan, S. / Ferreira, A. J. M. / Bordas, S. P. A. / Carrera, E. / Cinefra, M.

Analysis of composite plates by a unified formulation-cell based smoothed finite element method and field consistent elements

75-81

Batra, R. C. / Xiao, J.

Analysis of post-buckling and delamination in laminated composite St. Venant–Kirchhoff beams using CZM and layer-wise TSNDT

369-384

Qi, Chang / Yang, Shu / Yang, Li-Jun / Wei, Zhi-Yong / Lu, Zhen-Hua

Blast resistance and multi-objective optimization of aluminum foam-cored sandwich panels

45-57

Lopatin, A. V. / Morozov, E. V.

Buckling of a uniformly compressed rectangular SSCF composite sandwich plate

108-115

Lameiras, Rodrigo / Barros, Joaquim / Valente, Isabel B. / Azenha, Miguel

Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part I: Conception and pull-out tests

446-459

Lameiras, Rodrigo / Barros, Joaquim / Azenha, Miguel / Valente, Isabel B.

Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part II: Evaluation of mechanical behaviour

460-470

Piovan, M. T. / Ramírez, J. M. / Sampaio, R.

Dynamics of thin-walled composite beams: Analysis of parametric uncertainties

14-28

Miranda Guedes, Rui / Pereira, Celeste M. C. / Fonseca, Alexandra / Oliveira, Mónica S. A.

The effect of carbon nanotubes on viscoelastic behaviour of biomedical grade ultra-high molecular weight polyethylene

263-268

Koo, Jae-Mean / Choi, Jung-Hun / Seok, Chang-Sung

Evaluation for residual strength and fatigue characteristics after impact in CFRP composites

58-65

D'Ambrisi, Angelo / Mezzi, Marco / Caporale, Andrea

Experimental investigation on polymeric net-RCM reinforced masonry panels

207-215

Waimer, M. / Kohlgrüber, D. / Hachenberg, D. / Voggenreiter, H.

Experimental study of CFRP components subjected to dynamic crash loads

288-299

Azhari, F. / Boroomand, B. / Shahbazi, M.

Exponential basis functions in the solution of laminated plates using a higher-order Zig–Zag theory

398-407

Bilasse, M. / Oguamanam, D. C. D.

Forced harmonic response of sandwich plates with viscoelastic core using reduced-order model

311-318

Uymaz, B.

Forced vibration analysis of functionally graded beams using nonlocal elasticity

227-239

Mantari, J. L. / Guedes Soares, C.

Generalized layerwise HSDT and finite element formulation for symmetric laminated and sandwich composite plates

319-331

Fernandes, Emanuel M. / Mano, João F. / Reis, Rui L.

Hybrid cork–polymer composites containing sisal fibre: Morphology, effect of the fibre treatment on the mechanical properties and tensile failure prediction

153-162

He, Wen-ming / Chen, Wei-qiu / Qiao, Hua

In-plane vibration of rectangular plates with periodic inhomogeneity: Natural frequencies and their adjustment

134-140

Hosseini, M. / Khalili, S. M. R. / Fard, K. Malekzadeh

An indentation law for doubly curved composite sandwich panels with rigid-plastic core subjected to flat-ended cylindrical indenters

82-89

Kwon, Y. W. / Priest, E. M. / Gordis, J. H.

Investigation of vibrational characteristics of composite beams with fluid–structure interaction

269-278

Khalili, S. M. R. / Ardali, A.

Low-velocity impact response of doubly curved symmetric cross-ply laminated panel with embedded SMA wires

216-226

Azoti, W. L. / Tchalla, A. / Koutsawa, Y. / Makradi, A. / Rauchs, G. / Belouettar, S. / Zahrouni, H.

Mean-field constitutive modeling of elasto-plastic composites using two (2) incremental formulations

256-262

Gao, Liang / Sun, Yuguo / Cong, Lixin / Chen, Peng

Mechanical behaviours of composite sandwich panel with strengthened pyramidal truss cores

149-152

Hankeln, F. / Mahnken, R.

A mesoscopic model for deep drawing of carbon fibre prepregs at large strains

340-350

Ribeiro, M. C. S. / Fiúza, A. / Castro, A. C. M. / Silva, F. G. / Dinis, M. L. / Meixedo, J. P. / Alvim, M. R.

Mix design process of polyester polymer mortars modified with recycled GFRP waste materials

300-310

Rahmani, B. / Mortazavi, F. / Villemure, I. / Levesque, M.

A new approach to inverse identification of mechanical properties of composite materials: Regularized model updating

116-125

Sahoo, Rosalin / Singh, B. N.

A new inverse hyperbolic zigzag theory for the static analysis of laminated composite and sandwich plates

385-397

Upadhyay, A. K. / Shukla, K. K.

Non-linear static and dynamic analysis of skew sandwich plates

141-148

Alijani, Farbod / Amabili, Marco

Nonlinear vibrations of laminated and sandwich rectangular plates with free edges. Part 1: Theory and numerical simulations

422-436

Alijani, Farbod / Amabili, Marco / Ferrari, Giovanni / D'Alessandro, Vincenzo

Nonlinear vibrations of laminated and sandwich rectangular plates with free edges. Part 2: Experiments & comparisons

437-445

Isbilir, Ozden / Ghassemieh, Elaheh

Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites

126-133

Lubineau, Gilles / Nouri, Hedi / Roger, Frederic

On micro–meso relations homogenizing electrical properties of transversely cracked laminated composites

66-74

Araujo, A. L. / Madeira, J. F. A. / Mota Soares, C. M. / Mota Soares, C. A.

Optimal design for active damping in sandwich structures using the Direct MultiSearch method

29-34

Vandellos, T. / Huchette, C. / Carrere, N.

Proposition of a framework for the development of a cohesive zone model adapted to Carbon-Fiber Reinforced Plastic laminated composites

199-206

Zhang, Guoqi / Wang, Bing / Ma, Li / Xiong, Jian / Yang, Jinshui / Wu, Linzhi

The residual compressive strength of impact-damaged sandwich structures with pyramidal truss cores

188-198

Ekh, Johan / Schön, Joakim / Zenkert, Dan

Simple and efficient prediction of bearing failure in single shear, composite lap joints

35-44

Wu, Wangqing / Xie, Lei / Jiang, Bingyan / Ziegmann, Gerhard

Simultaneous binding and toughening concept for textile reinforced pCBT composites: Manufacturing and flexural properties

279-287

Li, Yong / Viola, Erasmo

Size effect investigation of a central interface crack between two bonded dissimilar materials

90-107

Alzahrani, Ebraheem O. / Zenkour, Ashraf M. / Sobhy, Mohammed

Small scale effect on hygro-thermo-mechanical bending of nanoplates embedded in an elastic medium

163-172

Asprone, Domenico / Auricchio, Ferdinando / Menna, Costantino / Morganti, Simone / Prota, Andrea / Reali, Alessandro

Statistical finite element analysis of the buckling behavior of honeycomb structures

240-255

Malekzadeh, P. / Bahranifard, F. / Ziaee, S.

Three-dimensional free vibration analysis of functionally graded cylindrical panels with cut-out using Chebyshev–Ritz method

1-13

Weps, Matthias / Naumenko, Konstantin / Altenbach, Holm

Unsymmetric three-layer laminate with soft core for photovoltaic modules

332-339

Godat, Ahmed / Légeron, Frédéric / Gagné, Vincent / Marmion, Benjamin

Use of FRP pultruded members for electricity transmission towers

408-421

Challamel, Noël

Variational formulation of gradient or/and nonlocal higher-order shear elasticity beams

351-368

Publicité

Composite Structures - novembre 2013

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - novembre 2013

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.