Composite Structures - May 2014

Published:	May 2014

Articles in this Issue

Author(s)	Title	Page(s)
Satasivam, Sindu / Bai, Yu / Zhao, Xiao-Ling	Adhesively bonded modular GFRP web–flange sandwich for building floor construction	381-392
Shams, Adel / Porfiri, Maurizio	Analysis of particle–matrix interfacial debonding using the proper generalized decomposition	602-618
Olmedo, A. / Santiuste, C. / Barbero, E.	An analytical model for the secondary bending prediction in single-lap composite bolted-joints	354-361
Ivañez, Ines / Barbero, Enrique / Sanchez-Saez, Sonia	Analytical study of the low-velocity impact response of composite sandwich beams	459-467
Koricho, Ermias Gebrekidan / Belingardi, Giovanni / Beyene, Alem Tekalign	Bending fatigue behavior of twill fabric E-glass/epoxy composite	169-178
Tashan, Jawdat / Al-Mahaidi, Riadh	Bond defect detection using PTT IRT in concrete structures strengthened with different CFRP systems	13-19
Liu, Qinghui / Qiao, Pizhong / Guo, Xingwen	Buckling analysis of restrained orthotropic plates under combined in-plane shear and axial loads and its application to web local buckling	540-552
Coburn, Broderick H. / Wu, Zhangming / Weaver, Paul M.	Buckling analysis of stiffened variable angle tow panels	259-270
Li, Y. S. / Cai, Z. Y. / Shi, S. Y.	Buckling and free vibration of magnetoelectroelastic nanoplate based on nonlocal theory	522-529
Phung-Van, P. / Nguyen-Thoi, T. / Dang-Trung, H. / Nguyen-Minh, N.	A cell-based smoothed discrete shear gap method (CS-FEM-DSG3) using layerwise theory based on the C0-HSDT for analyses of composite plates	553-565
Franco, Annalisa / Royer-Carfagni, Gianni	Cohesive debonding of a stiffener from an elastic substrate	401-414
Chi, Yin / Xu, Lihua / Yu, Hai-Sui	Constitutive modeling of steel-polypropylene hybrid fiber reinforced concrete using a non-associated plasticity and its numerical implementation	497-509
Martín-Santos, E. / Maimí, P. / González, E. V. / Cruz, P.	A continuum constitutive model for the simulation of fabric-reinforced composites	122-129
Yoon, Soon Ho / Kim, Ki Hyun / Lee, Dong Young / Lee, Dai Gil	Cryogenic strength of adhesive bridge joints for thermal insulation sandwich constructions	1-12
Li, Zhibin / Zheng, Zhijun / Yu, Jilin / Qian, Chunqiang / Lu, Fangyun	Deformation and failure mechanisms of sandwich beams under three-point bending at elevated temperatures	285-290
Pant, S. / Laliberte, J. / Martinez, M. / Rocha, B.	Derivation and experimental validation of Lamb wave equations for an n-layered anisotropic composite laminate	566-579
Glüge, Rainer / Kalisch, Jan	The effective stiffness and stress concentrations of a multi-layer laminate	580-586
Hosseini, M. R. Mostakhdemin / Dias, S. J. E. / Barros, J. A. O.	Effectiveness of prestressed NSM CFRP laminates for the flexural strengthening of RC slabs	249-258
Merijs Meri, R. / Zicans, J. / Maksimovs, R. / Ivanova, T. / Kalnins, M. / Berzina, R. / Japins, G.	Elasticity and long-term behavior of recycled polyethylene terephthalate (rPET)/montmorillonite (MMT) composites	453-458
Colombi, Pierluigi / Fava, Giulia / Poggi, Carlo	End debonding of CFRP wraps and strips for the strengthening of concrete structures	510-521
Mehboob, Hassan / Chang, Seung-Hwan	Evaluation of healing performance of biodegradable composite bone plates for a simulated fractured tibia model by finite element analysis	193-204
Dozio, Lorenzo	Exact free vibration analysis of Lévy FGM plates with higher-order shear and normal deformation theories	415-425
Rivallant, Samuel / Bouvet, Christophe / Abi Abdallah, Elias / Broll, Bernhard / Barrau, Jean-Jacques	Experimental analysis of CFRP laminates subjected to compression after impact: The role of impact-induced cracks in failure	147-157
Turvey, G. J.	Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams	426-435
Li, Dian-sen / Zhao, Chuang-qi / Jiang, Lei / Jiang, Nan	Experimental study on the bending properties and failure mechanism of 3D integrated woven spacer composites at room and cryogenic temperature	56-65
Romanoff, Jani / Reddy, J. N.	Experimental validation of the modified couple stress Timoshenko beam theory for web-core sandwich panels	130-137
Marzi, Stephan / Rauh, Andrea / Hinterhölzl, Roland M.	Fracture mechanical investigations and cohesive zone failure modelling on automotive composites	324-331
Lanc, Domagoj / Turkalj, Goran / Pesic, Igor	Global buckling analysis model for thin-walled composite laminated beam type structures	371-380
Heimbs, S. / Bergmann, T. / Schueler, D. / Toso-Pentecôte, N.	High velocity impact on preloaded composite plates	158-168
Siegfried, Marcel / Tola, Carmen / Claes, Michael / Lomov, Stepan V. / Verpoest, Ignaas / Gorbatikh, Larissa	Impact and residual after impact properties of carbon fiber/epoxy composites modified with carbon nanotubes	488-496
Liu, Qiang / Guo, Ou / Ju, Yang / Lin, Yongzhou / Li, Qing	Impact responses and residual flexural properties of narrow CFRP laminates	332-339
Reis, J. M. L. / Motta, E. P.	Mechanical behavior of piassava fiber reinforced castor oil polymer mortars	468-472
Somireddy, Madhukar / Rajagopal, Amirtham	Meshless natural neighbor Galerkin method for the bending and vibration analysis of composite plates	138-146
Canal, Luis P. / Michaud, Véronique	Micro-scale modeling of water diffusion in adhesive composite joints	340-348
Min, J. B. / Xue, D. / Shi, Y.	Micromechanics modeling for fatigue damage analysis designed for fabric reinforced ceramic matrix composites	213-223
Guzmán, Enrique / Cugnoni, Joël / Gmür, Thomas	Multi-factorial models of a carbon fibre/epoxy composite subjected to accelerated environmental ageing	179-192
Blasques, José Pedro	Multi-material topology optimization of laminated composite beams with eigenfrequency constraints	45-55
Li, Jinqiang / Narita, Yoshihiro	Multi-objective design for aeroelastic flutter of laminated shallow shells under variable flow angles	530-539
Velea, Marian N. / Wennhage, Per / Zenkert, Dan	Multi-objective optimisation of vehicle bodies made of FRP sandwich structures	75-84
Liang, Xu / Hu, Shuling / Shen, Shengping	A new Bernoulli–Euler beam model based on a simplified strain gradient elasticity theory and its applications	317-323
Fanteria, D. / Longo, G. / Panettieri, E.	A non-linear shear damage model to reproduce permanent indentation caused by impacts in composite laminates	111-121
Golmakani, M. E. / Rezatalab, J.	Nonlinear bending analysis of orthotropic nanoscale plates in an elastic matrix based on nonlocal continuum mechanics	85-97
Li, Zhi-Min / Qiao, Pizhong	Nonlinear vibration analysis of geodesically-stiffened laminated composite cylindrical shells in an elastic medium	473-487
Shen, Hui-Shen / Xiang, Y.	Nonlinear vibration of nanotube-reinforced composite cylindrical panels resting on elastic foundations in thermal environments	291-300
Xiang, Song / Kang, Gui-wen / Liu, Yuan-qiang	A nth-order shear deformation theory for natural frequency of the functionally graded plates on elastic foundations	224-231
Khelifa, M. / Celzard, A.	Numerical analysis of flexural strengthening of timber beams reinforced with CFRP strips	393-400
Xiang, Xie / Guoyong, Jin / Wanyou, Li / Zhigang, Liu	A numerical solution for vibration analysis of composite laminated conical, cylindrical shell and annular plate structures	20-30
Gentilleau, B. / Touchard, F. / Grandidier, J. C.	Numerical study of influence of temperature and matrix cracking on type IV hydrogen high pressure storage vessel behavior	98-110
Cárdenas, Diego / Elizalde, Hugo / Marzocca, Pier / Probst, Oliver / Ramírez, Ricardo / Toledo, Juan P.	The Poly-SAFE method: A semi-analytical representation of finite element models via nested polynomial reduction of modal data	301-316
Liu, Ling / Zhang, Hongying / Zhou, Yexin	Quasi-static mechanical response and corresponding analytical model of laminates incorporating with nanoweb interlayers	436-445
Al Khateeb, Sadah A. / Zenkour, Ashraf M.	A refined four-unknown plate theory for advanced plates resting on elastic foundations in hygrothermal environment	240-248
Nami, Mohammad Rahim / Janghorban, Maziar	Resonance behavior of FG rectangular micro/nano plate based on nonlocal elasticity theory and strain gradient theory with one gradient constant	349-353
Naik, N. K. / Pandya, Kedar S. / Pothnis, Jayaram R. / Gelu, Tamrat Abishu	Revisiting Kolsky bar data evaluation method	446-452
Wu, Chih-Ping / Chang, Shen-Kuo	Stability of carbon nanotube-reinforced composite plates with surface-bonded piezoelectric layers and under bi-axial compression	587-601
Zhang, L. W. / Lei, Z. X. / Liew, K. M. / Yu, J. L.	Static and dynamic of carbon nanotube reinforced functionally graded cylindrical panels	205-212
Schoeftner, J. / Buchberger, G. / Irschik, H.	Static and dynamic shape control of slender beams by piezoelectric actuation and resistive electrodes	66-74
Shokrieh, Mahmood M. / Mosalmani, Reza / Omidi, Majid Jamal	Strain-rate dependent micromechanical method to investigate the strength properties of glass/epoxy composites	232-239
Jeon, Jaehyeuk / Muliana, Anastasia / La Saponara, Valeria	Thermal stress and deformation analyses in fiber reinforced polymer composites undergoing heat conduction and mechanical loading	31-44
Abdollahzadeh Shahrbabaki, E. / Alibeigloo, A.	Three-dimensional free vibration of carbon nanotube-reinforced composite plates with various boundary conditions using Ritz method	362-370
Su, Zhu / Jin, Guoyong / Shi, Shuangxia / Ye, Tiangui	A unified accurate solution for vibration analysis of arbitrary functionally graded spherical shell segments with general end restraints	271-284

About this
data sheet
IssueID
37877
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - May 2014

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - May 2014

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.