Composite Structures - mai 2014

Publié:	mai 2014

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Satasivam, Sindu / Bai, Yu / Zhao, Xiao-Ling	Adhesively bonded modular GFRP web–flange sandwich for building floor construction	381-392
Shams, Adel / Porfiri, Maurizio	Analysis of particle–matrix interfacial debonding using the proper generalized decomposition	602-618
Olmedo, A. / Santiuste, C. / Barbero, E.	An analytical model for the secondary bending prediction in single-lap composite bolted-joints	354-361
Ivañez, Ines / Barbero, Enrique / Sanchez-Saez, Sonia	Analytical study of the low-velocity impact response of composite sandwich beams	459-467
Koricho, Ermias Gebrekidan / Belingardi, Giovanni / Beyene, Alem Tekalign	Bending fatigue behavior of twill fabric E-glass/epoxy composite	169-178
Tashan, Jawdat / Al-Mahaidi, Riadh	Bond defect detection using PTT IRT in concrete structures strengthened with different CFRP systems	13-19
Liu, Qinghui / Qiao, Pizhong / Guo, Xingwen	Buckling analysis of restrained orthotropic plates under combined in-plane shear and axial loads and its application to web local buckling	540-552
Coburn, Broderick H. / Wu, Zhangming / Weaver, Paul M.	Buckling analysis of stiffened variable angle tow panels	259-270
Li, Y. S. / Cai, Z. Y. / Shi, S. Y.	Buckling and free vibration of magnetoelectroelastic nanoplate based on nonlocal theory	522-529
Phung-Van, P. / Nguyen-Thoi, T. / Dang-Trung, H. / Nguyen-Minh, N.	A cell-based smoothed discrete shear gap method (CS-FEM-DSG3) using layerwise theory based on the C0-HSDT for analyses of composite plates	553-565
Franco, Annalisa / Royer-Carfagni, Gianni	Cohesive debonding of a stiffener from an elastic substrate	401-414
Chi, Yin / Xu, Lihua / Yu, Hai-Sui	Constitutive modeling of steel-polypropylene hybrid fiber reinforced concrete using a non-associated plasticity and its numerical implementation	497-509
Martín-Santos, E. / Maimí, P. / González, E. V. / Cruz, P.	A continuum constitutive model for the simulation of fabric-reinforced composites	122-129
Yoon, Soon Ho / Kim, Ki Hyun / Lee, Dong Young / Lee, Dai Gil	Cryogenic strength of adhesive bridge joints for thermal insulation sandwich constructions	1-12
Li, Zhibin / Zheng, Zhijun / Yu, Jilin / Qian, Chunqiang / Lu, Fangyun	Deformation and failure mechanisms of sandwich beams under three-point bending at elevated temperatures	285-290
Pant, S. / Laliberte, J. / Martinez, M. / Rocha, B.	Derivation and experimental validation of Lamb wave equations for an n-layered anisotropic composite laminate	566-579
Glüge, Rainer / Kalisch, Jan	The effective stiffness and stress concentrations of a multi-layer laminate	580-586
Hosseini, M. R. Mostakhdemin / Dias, S. J. E. / Barros, J. A. O.	Effectiveness of prestressed NSM CFRP laminates for the flexural strengthening of RC slabs	249-258
Merijs Meri, R. / Zicans, J. / Maksimovs, R. / Ivanova, T. / Kalnins, M. / Berzina, R. / Japins, G.	Elasticity and long-term behavior of recycled polyethylene terephthalate (rPET)/montmorillonite (MMT) composites	453-458
Colombi, Pierluigi / Fava, Giulia / Poggi, Carlo	End debonding of CFRP wraps and strips for the strengthening of concrete structures	510-521
Mehboob, Hassan / Chang, Seung-Hwan	Evaluation of healing performance of biodegradable composite bone plates for a simulated fractured tibia model by finite element analysis	193-204
Dozio, Lorenzo	Exact free vibration analysis of Lévy FGM plates with higher-order shear and normal deformation theories	415-425
Rivallant, Samuel / Bouvet, Christophe / Abi Abdallah, Elias / Broll, Bernhard / Barrau, Jean-Jacques	Experimental analysis of CFRP laminates subjected to compression after impact: The role of impact-induced cracks in failure	147-157
Turvey, G. J.	Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams	426-435
Li, Dian-sen / Zhao, Chuang-qi / Jiang, Lei / Jiang, Nan	Experimental study on the bending properties and failure mechanism of 3D integrated woven spacer composites at room and cryogenic temperature	56-65
Romanoff, Jani / Reddy, J. N.	Experimental validation of the modified couple stress Timoshenko beam theory for web-core sandwich panels	130-137
Marzi, Stephan / Rauh, Andrea / Hinterhölzl, Roland M.	Fracture mechanical investigations and cohesive zone failure modelling on automotive composites	324-331
Lanc, Domagoj / Turkalj, Goran / Pesic, Igor	Global buckling analysis model for thin-walled composite laminated beam type structures	371-380
Heimbs, S. / Bergmann, T. / Schueler, D. / Toso-Pentecôte, N.	High velocity impact on preloaded composite plates	158-168
Siegfried, Marcel / Tola, Carmen / Claes, Michael / Lomov, Stepan V. / Verpoest, Ignaas / Gorbatikh, Larissa	Impact and residual after impact properties of carbon fiber/epoxy composites modified with carbon nanotubes	488-496
Liu, Qiang / Guo, Ou / Ju, Yang / Lin, Yongzhou / Li, Qing	Impact responses and residual flexural properties of narrow CFRP laminates	332-339
Reis, J. M. L. / Motta, E. P.	Mechanical behavior of piassava fiber reinforced castor oil polymer mortars	468-472
Somireddy, Madhukar / Rajagopal, Amirtham	Meshless natural neighbor Galerkin method for the bending and vibration analysis of composite plates	138-146
Canal, Luis P. / Michaud, Véronique	Micro-scale modeling of water diffusion in adhesive composite joints	340-348
Min, J. B. / Xue, D. / Shi, Y.	Micromechanics modeling for fatigue damage analysis designed for fabric reinforced ceramic matrix composites	213-223
Guzmán, Enrique / Cugnoni, Joël / Gmür, Thomas	Multi-factorial models of a carbon fibre/epoxy composite subjected to accelerated environmental ageing	179-192
Blasques, José Pedro	Multi-material topology optimization of laminated composite beams with eigenfrequency constraints	45-55
Li, Jinqiang / Narita, Yoshihiro	Multi-objective design for aeroelastic flutter of laminated shallow shells under variable flow angles	530-539
Velea, Marian N. / Wennhage, Per / Zenkert, Dan	Multi-objective optimisation of vehicle bodies made of FRP sandwich structures	75-84
Liang, Xu / Hu, Shuling / Shen, Shengping	A new Bernoulli–Euler beam model based on a simplified strain gradient elasticity theory and its applications	317-323
Fanteria, D. / Longo, G. / Panettieri, E.	A non-linear shear damage model to reproduce permanent indentation caused by impacts in composite laminates	111-121
Golmakani, M. E. / Rezatalab, J.	Nonlinear bending analysis of orthotropic nanoscale plates in an elastic matrix based on nonlocal continuum mechanics	85-97
Li, Zhi-Min / Qiao, Pizhong	Nonlinear vibration analysis of geodesically-stiffened laminated composite cylindrical shells in an elastic medium	473-487
Shen, Hui-Shen / Xiang, Y.	Nonlinear vibration of nanotube-reinforced composite cylindrical panels resting on elastic foundations in thermal environments	291-300
Xiang, Song / Kang, Gui-wen / Liu, Yuan-qiang	A nth-order shear deformation theory for natural frequency of the functionally graded plates on elastic foundations	224-231
Khelifa, M. / Celzard, A.	Numerical analysis of flexural strengthening of timber beams reinforced with CFRP strips	393-400
Xiang, Xie / Guoyong, Jin / Wanyou, Li / Zhigang, Liu	A numerical solution for vibration analysis of composite laminated conical, cylindrical shell and annular plate structures	20-30
Gentilleau, B. / Touchard, F. / Grandidier, J. C.	Numerical study of influence of temperature and matrix cracking on type IV hydrogen high pressure storage vessel behavior	98-110
Cárdenas, Diego / Elizalde, Hugo / Marzocca, Pier / Probst, Oliver / Ramírez, Ricardo / Toledo, Juan P.	The Poly-SAFE method: A semi-analytical representation of finite element models via nested polynomial reduction of modal data	301-316
Liu, Ling / Zhang, Hongying / Zhou, Yexin	Quasi-static mechanical response and corresponding analytical model of laminates incorporating with nanoweb interlayers	436-445
Al Khateeb, Sadah A. / Zenkour, Ashraf M.	A refined four-unknown plate theory for advanced plates resting on elastic foundations in hygrothermal environment	240-248
Nami, Mohammad Rahim / Janghorban, Maziar	Resonance behavior of FG rectangular micro/nano plate based on nonlocal elasticity theory and strain gradient theory with one gradient constant	349-353
Naik, N. K. / Pandya, Kedar S. / Pothnis, Jayaram R. / Gelu, Tamrat Abishu	Revisiting Kolsky bar data evaluation method	446-452
Wu, Chih-Ping / Chang, Shen-Kuo	Stability of carbon nanotube-reinforced composite plates with surface-bonded piezoelectric layers and under bi-axial compression	587-601
Zhang, L. W. / Lei, Z. X. / Liew, K. M. / Yu, J. L.	Static and dynamic of carbon nanotube reinforced functionally graded cylindrical panels	205-212
Schoeftner, J. / Buchberger, G. / Irschik, H.	Static and dynamic shape control of slender beams by piezoelectric actuation and resistive electrodes	66-74
Shokrieh, Mahmood M. / Mosalmani, Reza / Omidi, Majid Jamal	Strain-rate dependent micromechanical method to investigate the strength properties of glass/epoxy composites	232-239
Jeon, Jaehyeuk / Muliana, Anastasia / La Saponara, Valeria	Thermal stress and deformation analyses in fiber reinforced polymer composites undergoing heat conduction and mechanical loading	31-44
Abdollahzadeh Shahrbabaki, E. / Alibeigloo, A.	Three-dimensional free vibration of carbon nanotube-reinforced composite plates with various boundary conditions using Ritz method	362-370
Su, Zhu / Jin, Guoyong / Shi, Shuangxia / Ye, Tiangui	A unified accurate solution for vibration analysis of arbitrary functionally graded spherical shell segments with general end restraints	271-284

Informations
sur cette fiche
IssueID
37877
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - mai 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - mai 2014

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.