Composite Structures - November 2015

Published:	November 2015

Articles in this Issue

Author(s)	Title	Page(s)
Karimi, Navid Zarif / Minak, Giangiacomo / Kianfar, Parnian	Analysis of damage mechanisms in drilling of composite materials by acoustic emission	107-114
Zheng, Qing / Jiang, Dazhi / Huang, Chunfang / Shang, Xinlong / Ju, Su	Analysis of failure loads and optimal design of composite lattice cylinder under axial compression	885-894
Zuo, Hao / Yang, Zhibo / Chen, Xuefeng / Xie, Yong / Miao, Huihui	Analysis of laminated composite plates using wavelet finite element method and higher-order plate theory	248-258
Liu, Fengrui / Zhang, Jianyu / Zhao, Libin / Xin, An / Zhou, Longwei	An analytical joint stiffness model for load transfer analysis in highly torqued multi-bolt composite joints with clearances	625-636
Jonnalagadda, A. K. / Sawant, A. S. / Rohde, S. E. / Sankar, B. V. / Ifju, P. G.	An analytical model for composite tubes with bend–twist coupling	578-584
Pasquali, Michele / Terra, Consuelo / Gaudenzi, Paolo	Analytical modelling of high-velocity impacts on thin woven fabric composite targets	951-965
Liang, Xi / Li, Huijian / Yu, Wei / Yang, Xiao / Zhang, Yanan / Wang, Xiaoxing	Application of combinational sphere element in meso-mechanical analysis of cemented particulate composite	720-730
Bacigalupo, Andrea / De Bellis, Maria Laura	Auxetic anti-tetrachiral materials: Equivalent elastic properties and frequency band-gaps	530-544
Girão Coelho, Ana M. / Mottram, J. Toby / Harries, Kent A.	Bolted connections of pultruded GFRP: Implications of geometric characteristics on net section failure	878-884
Borrie, D. / Liu, H. B. / Zhao, X. L. / Singh Raman, R. K. / Bai, Y.	Bond durability of fatigued CFRP-steel double-lap joints pre-exposed to marine environment	799-809
Li, Daokui / York, Christopher B.	Bounds on the natural frequencies of laminated rectangular plates with extension-twisting (and shearing–bending) coupling	37-46
Treviso, A. / Mundo, D. / Tournour, M.	A C0-continuous RZT beam element for the damped response of laminated structures	987-994
Zhang, Xu / Wang, Peng / Jiang, Meirong / Fan, Hualin / Zhou, Jiannan / Li, Wanxin / Dong, Lu / Chen, Hailong / Jin, Fengnian	CFRP strengthening reinforced concrete arches: Strengthening methods and experimental studies	852-867
Iriondo, J. / Aretxabaleta, L. / Aizpuru, A.	Characterisation of the elastic and damping properties of traditional FML and FML based on a self-reinforced polypropylene	47-54
Bae, Ji-Hun / Chang, Seung-Hwan	Characterization of an electroactive polymer (PVDF-TrFE) film-type sensor for health monitoring of composite structures	1090-1098
Lou, Jia / He, Liwen	Closed-form solutions for nonlinear bending and free vibration of functionally graded microplates based on the modified couple stress theory	810-820
Tounsi, Abdelouahed / Houari, Mohammed Sid Ahmed / Kaci, Abdelhakim	Comment on "A four-variable refined plate theory for dynamic stability analysis of S-FGM plates based on physical neutral surface"	842
Fu, J. W. / Chen, Z. T. / Qian, L. F.	Coupled thermoelastic analysis of a multi-layered hollow cylinder based on the C–T theory and its application on functionally graded materials	139-150
Chiu, Louis N. S. / Falzon, Brian G. / Ruan, Dong / Xu, Shanqing / Thomson, Rodney S. / Chen, Bernard / Yan, Wenyi	Crush responses of composite cylinder under quasi-static and dynamic loading	90-98
Kim, Do-Hyoung / Kim, Hyun-Gyung / Kim, Hak-Sung	Design optimization and manufacture of hybrid glass/carbon fiber reinforced composite bumper beam for automobile vehicle	742-752
Alfonso, L. / Uguen, A. / Badulescu, C. / Cognard, J.-Y. / Bonnemains, T. / Lolive, E. / Carrere, N.	Determination of the 3D failure envelope of a composite based on a modified Arcan test device	585-593
Scalici, T. / Fiore, V. / Orlando, G. / Valenza, A.	A DIC-based study of flexural behaviour of roving/mat/roving pultruded composites	82-89
Hwang, June-Sun / Choi, Tae-Gyun / Lee, Dongyoung / Lyu, Min-Young / Lee, Dai Gil / Yang, Dong-Yol	Dynamic and static characteristics of polypropylene pyramidal kagome structures	17-24
Zhou, Yue-Ting / Kim, Tae-Won	Dynamic contact modeling of anisotropic magneto-electro-elastic materials with volume fraction changes	1099-1110
Mondal, S. / Patra, A. K. / Chakraborty, S. / Mitra, N.	Dynamic performance of sandwich composite plates with circular hole/cut-out: A mixed experimental–numerical study	479-489
Capozucca, R. / Bossoletti, S.	Dynamic response of RC beams – in different scale – with near surface mounted CFRP rectangular rods	516-529
Jain, Atul / Abdin, Yasmine / Van Paepegem, Wim / Verpoest, Ignaas / Lomov, Stepan V.	Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models	692-706
Turvey, G. J. / Cerutti, X.	Effects of splice joint geometry and bolt torque on the serviceability response of pultruded glass fibre reinforced polymer composite beams	490-500
Otero, F. / Martinez, X. / Oller, S. / Salomón, O.	An efficient multi-scale method for non-linear analysis of composite structures	707-719
Qian, Hai / Zhou, Ding / Liu, Weiqing / Fang, Hai / Lu, Weidong	Elasticity solutions of simply supported laminated cylindrical arches subjected to thermo-loads	273-281
Mohammadi, H. / Ziaei-Rad, S. / Dayyani, I.	An equivalent model for trapezoidal corrugated cores based on homogenization method	160-170
Most, Jermaine / Stegmair, Daniel / Petry, Dirk	Error estimation between simple, closed-form analytical formulae and full-scale FEM for interlaminar stress prediction in curved laminates	72-81
Saeed, Hafiz Zain / Khan, Qaiser Uz Zaman / Ahmed, Afaq / Ali, Syed Muhammad / Iqbal, Muhammad	Experimental and finite element investigation of strengthened LSC bridge piers under Quasi-Static Cyclic Load Test	556-564
Schillo, Conny / Röstermundt, Dirk / Krause, Dieter	Experimental and numerical study on the influence of imperfections on the buckling load of unstiffened CFRP shells	128-138
Almassri, Belal / Barros, Joaquim A. O. / Al Mahmoud, Firas / François, Raoul	A FEM-based model to study the behaviour of corroded RC beams shear-repaired by NSM CFRP rods technique	731-741
Liu, P. F. / Gu, Z. P. / Peng, X. Q. / Zheng, J. Y.	Finite element analysis of the influence of cohesive law parameters on the multiple delamination behaviors of composites under compression	975-986
Chiu, Louis N. S. / Falzon, Brian G. / Boman, Romain / Chen, Bernard / Yan, Wenyi	Finite element modelling of composite structures under crushing load	215-228
Patti, A. / Barretta, R. / de Sciarra, F. Marotti / Mensitieri, G. / Menna, C. / Russo, P.	Flexural properties of multi-wall carbon nanotube/polypropylene composites: Experimental investigation and nonlocal modeling	282-289
Ribeiro, P. / Stoykov, S.	Forced periodic vibrations of cylindrical shells in laminated composites with curvilinear fibres	462-478
Han, Sung-Cheon / Park, Weon-Tae / Jung, Woo-Young	A four-variable refined plate theory for dynamic stability analysis of S-FGM plates based on physical neutral surface	1081-1089
Mohammadimehr, M. / Rousta Navi, B. / Ghorbanpour Arani, A.	Free vibration of viscoelastic double-bonded polymeric nanocomposite plates reinforced by FG-SWCNTs using MSGT, sinusoidal shear deformation theory and meshless method	654-671
Singh, Gaurav / Hopkins, Jonathan B.	General selection of lattice shape in ductile-reinforced brittle structures for increased stiffness	325-332
Demasi, Luciano / Ashenafi, Yonas / Cavallaro, Rauno / Santarpia, Enrico	Generalized Unified Formulation shell element for functionally graded Variable-Stiffness Composite Laminates and aeroelastic applications	501-515
Barretta, Raffaele / Feo, Luciano / Luciano, Raimondo / Marotti de Sciarra, Francesco	A gradient Eringen model for functionally graded nanorods	1124-1131
Liu, Hui / Sun, Xiaoyu / Xu, Yuanjie / Chu, Xihua	A hierarchical multilevel finite element method for mechanical analyses of periodical composite structures	115-127
Liu, Jiayi / Qiao, Wufeng / Liu, Jingxi / Xie, De / Zhou, Zhengong / Wu, Linzhi / Ma, Li	High temperature indentation behaviors of carbon fiber composite pyramidal truss structures	266-272
Alsubari, Saleh / Mohamed Ali, J. S. / Aminanda, Yulfian	Hygrothermoelastic analysis of anisotropic cylindrical shells	151-159
Sun, Yongtao / Wang, Bo / Pugno, Nicola / Wang, Bin / Ding, Qian	In-plane stiffness of the anisotropic multifunctional hierarchical honeycombs	616-624
Xu, Jiazhong / Yu, Liying / Qiao, Ming / You, Bo	In-situ curing of composite vessel using heating gasbag	171-182
Xie, Xiang / Zheng, Hui / Yang, Haosen	Indirect radial basis function approach for bending, free vibration and buckling analyses of functionally graded microbeams	606-615
Alian, A. R. / Kundalwal, S. I. / Meguid, S. A.	Interfacial and mechanical properties of epoxy nanocomposites using different multiscale modeling schemes	545-555
Swolfs, Yentl / Meerten, Yannick / Hine, Peter / Ward, Ian / Verpoest, Ignaas / Gorbatikh, Larissa	Introducing ductility in hybrid carbon fibre/self-reinforced composites through control of the damage mechanisms	259-265
Salavatian, M. / Smith, L. V.	An investigation of matrix damage in composite laminates using continuum damage mechanics	565-573
He, X. Q. / Rafiee, M. / Mareishi, S. / Liew, K. M.	Large amplitude vibration of fractionally damped viscoelastic CNTs/fiber/polymer multiscale composite beams	1111-1123
Kurtaran, Hasan	Large displacement static and transient analysis of functionally graded deep curved beams with generalized differential quadrature method	821-831
Rubio-López, A. / Olmedo, A. / Díaz-Álvarez, A. / Santiuste, C.	Manufacture of compression moulded PLA based biocomposites: A parametric study	995-1000
Venkatachari, Anand / Natarajan, Sundararajan / Ganapathi, Manickam / Haboussi, Mohamed	Mechanical buckling of curvilinear fibre composite laminate with material discontinuities and environmental effects	790-798
Melenka, Garrett W. / Lepp, Eric / Cheung, Benjamin K. O. / Carey, Jason P.	Micro-computed tomography analysis of tubular braided composites	384-396
Rahaman, Md M. / Deepu, S. P. / Roy, D. / Reddy, J. N.	A micropolar cohesive damage model for delamination of composites	425-432
Shah, Asif / Wang, Yonghui / Huang, Hao / Zhang, Li / Wang, Dongxing / Zhou, Lei / Duan, Yuping / Dong, Xinglong / Zhang, Zhidong	Microwave absorption and flexural properties of Fe nanoparticle/carbon fiber/epoxy resin composite plates	1132-1141
Damanpack, A. R. / Liao, W. H. / Aghdam, M. M. / Shakeri, M. / Bodaghi, M.	Micro–macro thermo-mechanical analysis of axisymmetric shape memory alloy composite cylinders	1001-1016
Han, Jingyong / Yu, Kaiping / Li, Xiangyang / Zhao, Rui	Modal density of sandwich panels based on an improved ordinary sandwich panel theory	927-938
Guennam, Ahmad Eduardo / Luccioni, Bibiana M.	Model for piezoelectric/ferroelectric composites polarized with interdigitated electrodes	312-324
Singh, Harpreet / Mahajan, Puneet	Modeling damage induced plasticity for low velocity impact simulation of three dimensional fiber reinforced composite	290-303
Bocciarelli, Massimiliano / Pisani, Marco Andrea	Modified force method for the nonlinear analysis of FRP reinforced concrete beams	645-653
Lamacchia, E. / Pirrera, A. / Chenchiah, I. V. / Weaver, P. M.	Morphing shell structures: A generalised modelling approach	1017-1027
DorMohammadi, S. / Rais-Rohani, M. / Rouhi, M.	A multilevel approach for analysis and optimization of nano-enhanced composite structures	1050-1059
Tornabene, Francesco / Fantuzzi, Nicholas / Bacciocchi, Michele / Viola, Erasmo	A new approach for treating concentrated loads in doubly-curved composite deep shells with variable radii of curvature	433-452
Pandey, Shashank / Pradyumna, S.	A new C0 higher-order layerwise finite element formulation for the analysis of laminated and sandwich plates	1-16
Hassan, A. M. T. / Mahmud, G. H. / Jones, S. W. / Whitford, C.	A new test method for investigating punching shear strength in Ultra High Performance Fibre Reinforced Concrete (UHPFRC) slabs	832-841
Shen, Hui-Shen / Xiang, Y.	Nonlinear response of nanotube-reinforced composite cylindrical panels subjected to combined loadings and resting on elastic foundations	939-950
Meng, Fanmao / Li, Wanxin / Fan, Hualin / Zhou, Yinzhi	A nonlinear theory for CFRP strengthened aluminum beam	574-577
Levin, V. A. / Zingerman, K. M. / Vershinin, A. V. / Yakovlev, M.Ya.	Numerical analysis of effective mechanical properties of rubber-cord composites under finite strains	25-36
Yu, Kuang / Morozov, E. V. / Ashraf, M. A. / Shankar, K.	Numerical analysis of the mechanical behaviour of reinforced thermoplastic pipes under combined external pressure and bending	453-461
Qi, Lehua / Tian, Wenlong / Zhou, Jiming	Numerical evaluation of effective elastic properties of composites reinforced by spatially randomly distributed short fibers with certain aspect ratio	843-851
Amendola, A. / Hernández-Nava, E. / Goodall, R. / Todd, I. / Skelton, R. E. / Fraternali, F.	On the additive manufacturing, post-tensioning and testing of bi-material tensegrity structures	66-71
Ascione, Francesco / Mancusi, Geminiano / Spadea, Saverio / Lamberti, Marco / Lebon, Frédéric / Maurel-Pantel, Aurélien	On the flexural behaviour of GFRP beams obtained by bonding simple panels: An experimental investigation	55-65
Sahmani, S. / Aghdam, M. M. / Bahrami, M.	On the postbuckling behavior of geometrically imperfect cylindrical nanoshells subjected to radial compression including surface stress effects	414-424
Dai, S. / Cunningham, P. R. / Marshall, S. / Silva, C.	Open hole quasi-static and fatigue characterisation of 3D woven composites	765-774
Lemaire, Etienne / Zein, Samih / Bruyneel, Michaël	Optimization of composite structures with curved fiber trajectories	895-904
Hiroshima, N. / Hatta, H. / Koyama, M. / Goto, K. / Kogo, Y.	Optimization of flywheel rotor made of three-dimensional composites	304-311
Montemurro, Marco	The polar analysis of the Third-order Shear Deformation Theory of laminates	775-789
Mustafa, Ghulam / Suleman, Afzal / Crawford, Curran	Probabilistic micromechanical analysis of composite material stiffness properties for a wind turbine blade	905-916
Khan, M. A. / Reynolds, N. / Williams, G. / Kendall, K. N.	Processing of thermoset prepregs for high-volume applications and their numerical analysis using superimposed finite elements	917-926
Del Linz, P. / Hooper, P. A. / Arora, H. / Smith, D. / Pascoe, L. / Cormie, D. / Blackman, B. R. K. / Dear, J. P.	Reaction forces of laminated glass windows subject to blast loads	193-206
Tian, Wenlong / Qi, Lehua / Zhou, Jiming / Liang, Junhao / Ma, Yuqin	Representative volume element for composites reinforced by spatially randomly distributed discontinuous fibers and its applications	366-373
Dey, S. / Mukhopadhyay, T. / Khodaparast, H. Haddad / Kerfriden, P. / Adhikari, S.	Rotational and ply-level uncertainty in response of composite shallow conical shells	594-605
Manikandan, Periyasamy / Chai, Gin Boay	A similitude approach towards the understanding of low velocity impact characteristics of bi-layered hybrid composite structures	183-192
Simsek, Mesut	Size dependent nonlinear free vibration of an axially functionally graded (AFG) microbeam using He’s variational method	207-214
Liu, Liu / Lv, Bingyang / He, Tiren	The stochastic dynamic snap-through response of thermally buckled composite panels	344-355
Xing, Jingzhong / Geng, Pei / Yang, Tao	Stress and deformation of multiple winding angle hybrid filament-wound thick cylinder under axial loading and internal and external pressure	868-877
An, Qinglong / Ming, Weiwei / Cai, Xiaojiang / Chen, Ming	Study on the cutting mechanics characteristics of high-strength UD-CFRP laminates based on orthogonal cutting method	374-383
Zhou, Jialv / Deng, Xiaobin / Yan, Yuan / Chen, Xi / Liu, Yilun	Superelasticity and reversible energy absorption of polyurethane cellular structures with sand filler	966-974
Karličić, Danilo / Cajić, Milan / Kozić, Predrag / Pavlović, Ivan	Temperature effects on the vibration and stability behavior of multi-layered graphene sheets embedded in an elastic medium	672-681
Seidi, J. / Khalili, S. M. R. / Malekzadeh, K.	Temperature-dependent buckling analysis of sandwich truncated conical shells with FG facesheets	682-691
Nowak, Tomasz / Schmidt, Jerzy	Theoretical, numerical and experimental analysis of thick walled fiber metal laminate tube under axisymmetric loads	637-644
Van Tung, Hoang	Thermal and thermomechanical postbuckling of FGM sandwich plates resting on elastic foundations with tangential edge constraints and temperature dependent properties	1028-1039
Zhang, Xiaolei / Yu, Kaiping / Bai, Yunhe / Zhao, Rui	Thermal vibration characteristics of fiber-reinforced mullite sandwich structure with ceramic foams core	99-106
Liu, Bo / Xing, Yufeng / Wang, Wei / Yu, Weidong	Thickness-shear vibration analysis of circular quartz crystal plates by a differential quadrature hierarchical finite element method	1073-1080
Zhou, Yinhua / Yazdani Nezhad, Hamed / Hou, Chi / Wan, XiaoPeng / McCarthy, C. T. / McCarthy, M. A.	A three dimensional implicit finite element damage model and its application to single-lap multi-bolt composite joints with variable clearance	1060-1072
Ansari, R. / Faghih Shojaei, M. / Shahabodini, A. / Bazdid-Vahdati, M.	Three-dimensional bending and vibration analysis of functionally graded nanoplates by a novel differential quadrature-based approach	753-764
Shah, P. H. / Batra, R. C.	Through-the-thickness stress distributions near edges of composite laminates using stress recovery scheme and third order shear and normal deformable theory	397-413
Hamdaoui, M. / Druesne, F. / Daya, E. M.	Variability analysis of frequency dependent visco-elastic three-layered beams	238-247
Li, Xiangyang / Yu, Kaiping	Vibration and acoustic responses of composite and sandwich panels under thermal environment	1040-1049
Duc, Nguyen Dinh / Hadavinia, Homayoun / Thu, Pham Van / Quan, Tran Quoc	Vibration and nonlinear dynamic response of imperfect three-phase polymer nanocomposite panel resting on elastic foundations under hydrodynamic loads	229-237
Alagappan, P. / Rajagopal, K. R. / Srinivasa, A. R.	Wave propagation due to impact through layered polymer composites: Part 2 – Planar problems	356-365
Nasirmanesh, Amir / Mohammadi, Soheil	XFEM buckling analysis of cracked composite plates	333-343

About this
data sheet
IssueID
37857
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - November 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - November 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.