Composite Structures - novembre 2015

Publié:	novembre 2015

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Karimi, Navid Zarif / Minak, Giangiacomo / Kianfar, Parnian	Analysis of damage mechanisms in drilling of composite materials by acoustic emission	107-114
Zheng, Qing / Jiang, Dazhi / Huang, Chunfang / Shang, Xinlong / Ju, Su	Analysis of failure loads and optimal design of composite lattice cylinder under axial compression	885-894
Zuo, Hao / Yang, Zhibo / Chen, Xuefeng / Xie, Yong / Miao, Huihui	Analysis of laminated composite plates using wavelet finite element method and higher-order plate theory	248-258
Liu, Fengrui / Zhang, Jianyu / Zhao, Libin / Xin, An / Zhou, Longwei	An analytical joint stiffness model for load transfer analysis in highly torqued multi-bolt composite joints with clearances	625-636
Jonnalagadda, A. K. / Sawant, A. S. / Rohde, S. E. / Sankar, B. V. / Ifju, P. G.	An analytical model for composite tubes with bend–twist coupling	578-584
Pasquali, Michele / Terra, Consuelo / Gaudenzi, Paolo	Analytical modelling of high-velocity impacts on thin woven fabric composite targets	951-965
Liang, Xi / Li, Huijian / Yu, Wei / Yang, Xiao / Zhang, Yanan / Wang, Xiaoxing	Application of combinational sphere element in meso-mechanical analysis of cemented particulate composite	720-730
Bacigalupo, Andrea / De Bellis, Maria Laura	Auxetic anti-tetrachiral materials: Equivalent elastic properties and frequency band-gaps	530-544
Girão Coelho, Ana M. / Mottram, J. Toby / Harries, Kent A.	Bolted connections of pultruded GFRP: Implications of geometric characteristics on net section failure	878-884
Borrie, D. / Liu, H. B. / Zhao, X. L. / Singh Raman, R. K. / Bai, Y.	Bond durability of fatigued CFRP-steel double-lap joints pre-exposed to marine environment	799-809
Li, Daokui / York, Christopher B.	Bounds on the natural frequencies of laminated rectangular plates with extension-twisting (and shearing–bending) coupling	37-46
Treviso, A. / Mundo, D. / Tournour, M.	A C0-continuous RZT beam element for the damped response of laminated structures	987-994
Zhang, Xu / Wang, Peng / Jiang, Meirong / Fan, Hualin / Zhou, Jiannan / Li, Wanxin / Dong, Lu / Chen, Hailong / Jin, Fengnian	CFRP strengthening reinforced concrete arches: Strengthening methods and experimental studies	852-867
Iriondo, J. / Aretxabaleta, L. / Aizpuru, A.	Characterisation of the elastic and damping properties of traditional FML and FML based on a self-reinforced polypropylene	47-54
Bae, Ji-Hun / Chang, Seung-Hwan	Characterization of an electroactive polymer (PVDF-TrFE) film-type sensor for health monitoring of composite structures	1090-1098
Lou, Jia / He, Liwen	Closed-form solutions for nonlinear bending and free vibration of functionally graded microplates based on the modified couple stress theory	810-820
Tounsi, Abdelouahed / Houari, Mohammed Sid Ahmed / Kaci, Abdelhakim	Comment on "A four-variable refined plate theory for dynamic stability analysis of S-FGM plates based on physical neutral surface"	842
Fu, J. W. / Chen, Z. T. / Qian, L. F.	Coupled thermoelastic analysis of a multi-layered hollow cylinder based on the C–T theory and its application on functionally graded materials	139-150
Chiu, Louis N. S. / Falzon, Brian G. / Ruan, Dong / Xu, Shanqing / Thomson, Rodney S. / Chen, Bernard / Yan, Wenyi	Crush responses of composite cylinder under quasi-static and dynamic loading	90-98
Kim, Do-Hyoung / Kim, Hyun-Gyung / Kim, Hak-Sung	Design optimization and manufacture of hybrid glass/carbon fiber reinforced composite bumper beam for automobile vehicle	742-752
Alfonso, L. / Uguen, A. / Badulescu, C. / Cognard, J.-Y. / Bonnemains, T. / Lolive, E. / Carrere, N.	Determination of the 3D failure envelope of a composite based on a modified Arcan test device	585-593
Scalici, T. / Fiore, V. / Orlando, G. / Valenza, A.	A DIC-based study of flexural behaviour of roving/mat/roving pultruded composites	82-89
Hwang, June-Sun / Choi, Tae-Gyun / Lee, Dongyoung / Lyu, Min-Young / Lee, Dai Gil / Yang, Dong-Yol	Dynamic and static characteristics of polypropylene pyramidal kagome structures	17-24
Zhou, Yue-Ting / Kim, Tae-Won	Dynamic contact modeling of anisotropic magneto-electro-elastic materials with volume fraction changes	1099-1110
Mondal, S. / Patra, A. K. / Chakraborty, S. / Mitra, N.	Dynamic performance of sandwich composite plates with circular hole/cut-out: A mixed experimental–numerical study	479-489
Capozucca, R. / Bossoletti, S.	Dynamic response of RC beams – in different scale – with near surface mounted CFRP rectangular rods	516-529
Jain, Atul / Abdin, Yasmine / Van Paepegem, Wim / Verpoest, Ignaas / Lomov, Stepan V.	Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models	692-706
Turvey, G. J. / Cerutti, X.	Effects of splice joint geometry and bolt torque on the serviceability response of pultruded glass fibre reinforced polymer composite beams	490-500
Otero, F. / Martinez, X. / Oller, S. / Salomón, O.	An efficient multi-scale method for non-linear analysis of composite structures	707-719
Qian, Hai / Zhou, Ding / Liu, Weiqing / Fang, Hai / Lu, Weidong	Elasticity solutions of simply supported laminated cylindrical arches subjected to thermo-loads	273-281
Mohammadi, H. / Ziaei-Rad, S. / Dayyani, I.	An equivalent model for trapezoidal corrugated cores based on homogenization method	160-170
Most, Jermaine / Stegmair, Daniel / Petry, Dirk	Error estimation between simple, closed-form analytical formulae and full-scale FEM for interlaminar stress prediction in curved laminates	72-81
Saeed, Hafiz Zain / Khan, Qaiser Uz Zaman / Ahmed, Afaq / Ali, Syed Muhammad / Iqbal, Muhammad	Experimental and finite element investigation of strengthened LSC bridge piers under Quasi-Static Cyclic Load Test	556-564
Schillo, Conny / Röstermundt, Dirk / Krause, Dieter	Experimental and numerical study on the influence of imperfections on the buckling load of unstiffened CFRP shells	128-138
Almassri, Belal / Barros, Joaquim A. O. / Al Mahmoud, Firas / François, Raoul	A FEM-based model to study the behaviour of corroded RC beams shear-repaired by NSM CFRP rods technique	731-741
Liu, P. F. / Gu, Z. P. / Peng, X. Q. / Zheng, J. Y.	Finite element analysis of the influence of cohesive law parameters on the multiple delamination behaviors of composites under compression	975-986
Chiu, Louis N. S. / Falzon, Brian G. / Boman, Romain / Chen, Bernard / Yan, Wenyi	Finite element modelling of composite structures under crushing load	215-228
Patti, A. / Barretta, R. / de Sciarra, F. Marotti / Mensitieri, G. / Menna, C. / Russo, P.	Flexural properties of multi-wall carbon nanotube/polypropylene composites: Experimental investigation and nonlocal modeling	282-289
Ribeiro, P. / Stoykov, S.	Forced periodic vibrations of cylindrical shells in laminated composites with curvilinear fibres	462-478
Han, Sung-Cheon / Park, Weon-Tae / Jung, Woo-Young	A four-variable refined plate theory for dynamic stability analysis of S-FGM plates based on physical neutral surface	1081-1089
Mohammadimehr, M. / Rousta Navi, B. / Ghorbanpour Arani, A.	Free vibration of viscoelastic double-bonded polymeric nanocomposite plates reinforced by FG-SWCNTs using MSGT, sinusoidal shear deformation theory and meshless method	654-671
Singh, Gaurav / Hopkins, Jonathan B.	General selection of lattice shape in ductile-reinforced brittle structures for increased stiffness	325-332
Demasi, Luciano / Ashenafi, Yonas / Cavallaro, Rauno / Santarpia, Enrico	Generalized Unified Formulation shell element for functionally graded Variable-Stiffness Composite Laminates and aeroelastic applications	501-515
Barretta, Raffaele / Feo, Luciano / Luciano, Raimondo / Marotti de Sciarra, Francesco	A gradient Eringen model for functionally graded nanorods	1124-1131
Liu, Hui / Sun, Xiaoyu / Xu, Yuanjie / Chu, Xihua	A hierarchical multilevel finite element method for mechanical analyses of periodical composite structures	115-127
Liu, Jiayi / Qiao, Wufeng / Liu, Jingxi / Xie, De / Zhou, Zhengong / Wu, Linzhi / Ma, Li	High temperature indentation behaviors of carbon fiber composite pyramidal truss structures	266-272
Alsubari, Saleh / Mohamed Ali, J. S. / Aminanda, Yulfian	Hygrothermoelastic analysis of anisotropic cylindrical shells	151-159
Sun, Yongtao / Wang, Bo / Pugno, Nicola / Wang, Bin / Ding, Qian	In-plane stiffness of the anisotropic multifunctional hierarchical honeycombs	616-624
Xu, Jiazhong / Yu, Liying / Qiao, Ming / You, Bo	In-situ curing of composite vessel using heating gasbag	171-182
Xie, Xiang / Zheng, Hui / Yang, Haosen	Indirect radial basis function approach for bending, free vibration and buckling analyses of functionally graded microbeams	606-615
Alian, A. R. / Kundalwal, S. I. / Meguid, S. A.	Interfacial and mechanical properties of epoxy nanocomposites using different multiscale modeling schemes	545-555
Swolfs, Yentl / Meerten, Yannick / Hine, Peter / Ward, Ian / Verpoest, Ignaas / Gorbatikh, Larissa	Introducing ductility in hybrid carbon fibre/self-reinforced composites through control of the damage mechanisms	259-265
Salavatian, M. / Smith, L. V.	An investigation of matrix damage in composite laminates using continuum damage mechanics	565-573
He, X. Q. / Rafiee, M. / Mareishi, S. / Liew, K. M.	Large amplitude vibration of fractionally damped viscoelastic CNTs/fiber/polymer multiscale composite beams	1111-1123
Kurtaran, Hasan	Large displacement static and transient analysis of functionally graded deep curved beams with generalized differential quadrature method	821-831
Rubio-López, A. / Olmedo, A. / Díaz-Álvarez, A. / Santiuste, C.	Manufacture of compression moulded PLA based biocomposites: A parametric study	995-1000
Venkatachari, Anand / Natarajan, Sundararajan / Ganapathi, Manickam / Haboussi, Mohamed	Mechanical buckling of curvilinear fibre composite laminate with material discontinuities and environmental effects	790-798
Melenka, Garrett W. / Lepp, Eric / Cheung, Benjamin K. O. / Carey, Jason P.	Micro-computed tomography analysis of tubular braided composites	384-396
Rahaman, Md M. / Deepu, S. P. / Roy, D. / Reddy, J. N.	A micropolar cohesive damage model for delamination of composites	425-432
Shah, Asif / Wang, Yonghui / Huang, Hao / Zhang, Li / Wang, Dongxing / Zhou, Lei / Duan, Yuping / Dong, Xinglong / Zhang, Zhidong	Microwave absorption and flexural properties of Fe nanoparticle/carbon fiber/epoxy resin composite plates	1132-1141
Damanpack, A. R. / Liao, W. H. / Aghdam, M. M. / Shakeri, M. / Bodaghi, M.	Micro–macro thermo-mechanical analysis of axisymmetric shape memory alloy composite cylinders	1001-1016
Han, Jingyong / Yu, Kaiping / Li, Xiangyang / Zhao, Rui	Modal density of sandwich panels based on an improved ordinary sandwich panel theory	927-938
Guennam, Ahmad Eduardo / Luccioni, Bibiana M.	Model for piezoelectric/ferroelectric composites polarized with interdigitated electrodes	312-324
Singh, Harpreet / Mahajan, Puneet	Modeling damage induced plasticity for low velocity impact simulation of three dimensional fiber reinforced composite	290-303
Bocciarelli, Massimiliano / Pisani, Marco Andrea	Modified force method for the nonlinear analysis of FRP reinforced concrete beams	645-653
Lamacchia, E. / Pirrera, A. / Chenchiah, I. V. / Weaver, P. M.	Morphing shell structures: A generalised modelling approach	1017-1027
DorMohammadi, S. / Rais-Rohani, M. / Rouhi, M.	A multilevel approach for analysis and optimization of nano-enhanced composite structures	1050-1059
Tornabene, Francesco / Fantuzzi, Nicholas / Bacciocchi, Michele / Viola, Erasmo	A new approach for treating concentrated loads in doubly-curved composite deep shells with variable radii of curvature	433-452
Pandey, Shashank / Pradyumna, S.	A new C0 higher-order layerwise finite element formulation for the analysis of laminated and sandwich plates	1-16
Hassan, A. M. T. / Mahmud, G. H. / Jones, S. W. / Whitford, C.	A new test method for investigating punching shear strength in Ultra High Performance Fibre Reinforced Concrete (UHPFRC) slabs	832-841
Shen, Hui-Shen / Xiang, Y.	Nonlinear response of nanotube-reinforced composite cylindrical panels subjected to combined loadings and resting on elastic foundations	939-950
Meng, Fanmao / Li, Wanxin / Fan, Hualin / Zhou, Yinzhi	A nonlinear theory for CFRP strengthened aluminum beam	574-577
Levin, V. A. / Zingerman, K. M. / Vershinin, A. V. / Yakovlev, M.Ya.	Numerical analysis of effective mechanical properties of rubber-cord composites under finite strains	25-36
Yu, Kuang / Morozov, E. V. / Ashraf, M. A. / Shankar, K.	Numerical analysis of the mechanical behaviour of reinforced thermoplastic pipes under combined external pressure and bending	453-461
Qi, Lehua / Tian, Wenlong / Zhou, Jiming	Numerical evaluation of effective elastic properties of composites reinforced by spatially randomly distributed short fibers with certain aspect ratio	843-851
Amendola, A. / Hernández-Nava, E. / Goodall, R. / Todd, I. / Skelton, R. E. / Fraternali, F.	On the additive manufacturing, post-tensioning and testing of bi-material tensegrity structures	66-71
Ascione, Francesco / Mancusi, Geminiano / Spadea, Saverio / Lamberti, Marco / Lebon, Frédéric / Maurel-Pantel, Aurélien	On the flexural behaviour of GFRP beams obtained by bonding simple panels: An experimental investigation	55-65
Sahmani, S. / Aghdam, M. M. / Bahrami, M.	On the postbuckling behavior of geometrically imperfect cylindrical nanoshells subjected to radial compression including surface stress effects	414-424
Dai, S. / Cunningham, P. R. / Marshall, S. / Silva, C.	Open hole quasi-static and fatigue characterisation of 3D woven composites	765-774
Lemaire, Etienne / Zein, Samih / Bruyneel, Michaël	Optimization of composite structures with curved fiber trajectories	895-904
Hiroshima, N. / Hatta, H. / Koyama, M. / Goto, K. / Kogo, Y.	Optimization of flywheel rotor made of three-dimensional composites	304-311
Montemurro, Marco	The polar analysis of the Third-order Shear Deformation Theory of laminates	775-789
Mustafa, Ghulam / Suleman, Afzal / Crawford, Curran	Probabilistic micromechanical analysis of composite material stiffness properties for a wind turbine blade	905-916
Khan, M. A. / Reynolds, N. / Williams, G. / Kendall, K. N.	Processing of thermoset prepregs for high-volume applications and their numerical analysis using superimposed finite elements	917-926
Del Linz, P. / Hooper, P. A. / Arora, H. / Smith, D. / Pascoe, L. / Cormie, D. / Blackman, B. R. K. / Dear, J. P.	Reaction forces of laminated glass windows subject to blast loads	193-206
Tian, Wenlong / Qi, Lehua / Zhou, Jiming / Liang, Junhao / Ma, Yuqin	Representative volume element for composites reinforced by spatially randomly distributed discontinuous fibers and its applications	366-373
Dey, S. / Mukhopadhyay, T. / Khodaparast, H. Haddad / Kerfriden, P. / Adhikari, S.	Rotational and ply-level uncertainty in response of composite shallow conical shells	594-605
Manikandan, Periyasamy / Chai, Gin Boay	A similitude approach towards the understanding of low velocity impact characteristics of bi-layered hybrid composite structures	183-192
Simsek, Mesut	Size dependent nonlinear free vibration of an axially functionally graded (AFG) microbeam using He’s variational method	207-214
Liu, Liu / Lv, Bingyang / He, Tiren	The stochastic dynamic snap-through response of thermally buckled composite panels	344-355
Xing, Jingzhong / Geng, Pei / Yang, Tao	Stress and deformation of multiple winding angle hybrid filament-wound thick cylinder under axial loading and internal and external pressure	868-877
An, Qinglong / Ming, Weiwei / Cai, Xiaojiang / Chen, Ming	Study on the cutting mechanics characteristics of high-strength UD-CFRP laminates based on orthogonal cutting method	374-383
Zhou, Jialv / Deng, Xiaobin / Yan, Yuan / Chen, Xi / Liu, Yilun	Superelasticity and reversible energy absorption of polyurethane cellular structures with sand filler	966-974
Karličić, Danilo / Cajić, Milan / Kozić, Predrag / Pavlović, Ivan	Temperature effects on the vibration and stability behavior of multi-layered graphene sheets embedded in an elastic medium	672-681
Seidi, J. / Khalili, S. M. R. / Malekzadeh, K.	Temperature-dependent buckling analysis of sandwich truncated conical shells with FG facesheets	682-691
Nowak, Tomasz / Schmidt, Jerzy	Theoretical, numerical and experimental analysis of thick walled fiber metal laminate tube under axisymmetric loads	637-644
Van Tung, Hoang	Thermal and thermomechanical postbuckling of FGM sandwich plates resting on elastic foundations with tangential edge constraints and temperature dependent properties	1028-1039
Zhang, Xiaolei / Yu, Kaiping / Bai, Yunhe / Zhao, Rui	Thermal vibration characteristics of fiber-reinforced mullite sandwich structure with ceramic foams core	99-106
Liu, Bo / Xing, Yufeng / Wang, Wei / Yu, Weidong	Thickness-shear vibration analysis of circular quartz crystal plates by a differential quadrature hierarchical finite element method	1073-1080
Zhou, Yinhua / Yazdani Nezhad, Hamed / Hou, Chi / Wan, XiaoPeng / McCarthy, C. T. / McCarthy, M. A.	A three dimensional implicit finite element damage model and its application to single-lap multi-bolt composite joints with variable clearance	1060-1072
Ansari, R. / Faghih Shojaei, M. / Shahabodini, A. / Bazdid-Vahdati, M.	Three-dimensional bending and vibration analysis of functionally graded nanoplates by a novel differential quadrature-based approach	753-764
Shah, P. H. / Batra, R. C.	Through-the-thickness stress distributions near edges of composite laminates using stress recovery scheme and third order shear and normal deformable theory	397-413
Hamdaoui, M. / Druesne, F. / Daya, E. M.	Variability analysis of frequency dependent visco-elastic three-layered beams	238-247
Li, Xiangyang / Yu, Kaiping	Vibration and acoustic responses of composite and sandwich panels under thermal environment	1040-1049
Duc, Nguyen Dinh / Hadavinia, Homayoun / Thu, Pham Van / Quan, Tran Quoc	Vibration and nonlinear dynamic response of imperfect three-phase polymer nanocomposite panel resting on elastic foundations under hydrodynamic loads	229-237
Alagappan, P. / Rajagopal, K. R. / Srinivasa, A. R.	Wave propagation due to impact through layered polymer composites: Part 2 – Planar problems	356-365
Nasirmanesh, Amir / Mohammadi, Soheil	XFEM buckling analysis of cracked composite plates	333-343

Informations
sur cette fiche
IssueID
37857
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - novembre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - novembre 2015

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.