Composite Structures - December 2015

Published:	December 2015

Articles in this Issue

Author(s)	Title	Page(s)
Yu, Hong / Heider, Dirk / Advani, Suresh	A 3D microstructure based resistor network model for the electrical resistivity of unidirectional carbon composites	740-749
Garrido, Mário / Correia, João R. / Keller, Thomas / Branco, Fernando A.	Adhesively bonded connections between composite sandwich floor panels for building rehabilitation	255-268
Atutis, Mantas / Valivonis, Juozas / Atutis, Edgaras	Analysis of serviceability limit state of GFRP prestressed concrete beams	450-459
Liu, Qimao	Analytical sensitivity analysis of eigenvalues and lightweight design of composite laminated beams	918-926
Kulkarni, Kamlesh / Singh, B. N. / Maiti, D. K.	Analytical solution for bending and buckling analysis of functionally graded plates using inverse trigonometric shear deformation theory	147-157
Zahr Viñuela, J. / Pérez-Castellanos, J. L.	The anisotropic criterion of von Mises (1928) as a yield condition for PMMCs. A calibration procedure based on numerical cell-analysis	613-632
Turkalj, Goran / Lanc, Domagoj / Brnić, Josip / Pesic, Igor	A beam formulation for large displacement analysis of composite frames with semi-rigid connections	237-246
Akgöz, Bekir / Civalek, Ömer	Bending analysis of FG microbeams resting on Winkler elastic foundation via strain gradient elasticity	294-301
Cernescu, Anghel / Romanoff, Jani	Bending deflection of sandwich beams considering local effect of concentrated force	169-175
Harvey, C. M. / Wood, J. D. / Wang, S.	Brittle interfacial cracking between two dissimilar elastic layers: Part 1—Analytical development	1076-1086
Harvey, C. M. / Wood, J. D. / Wang, S.	Brittle interfacial cracking between two dissimilar elastic layers: Part 2—Numerical verification	1087-1094
Schmitz, A. / Horst, P.	Buckling of multiple discrete composite bundles in the elastomeric foundation of a curvature-morphing skin	1014-1023
Lim, Jun Woo / Lee, Dai Gil	Carbon fiber/polyethylene bipolar plate-carbon felt electrode assembly for vanadium redox flow batteries (VRFB)	483-492
Latko, Paulina / Rumiński, Witalis / Boczkowska, Anna	Carbon nanotubes-doped veils	52-59
Boris, Renata / Kerienė, Jadvyga Regina / Antonovič, Valentin / Madej, Dominika	Characterization of microstructural evolution and mechanical properties of refractory composite	811-819
Wang, Chen / Xu, Xiwu	Cohesive element analysis of fatigue delamination propagation in composite materials with improved crack tip tracking algorism	176-184
Ostrowski, Piotr / Michalak, Bohdan	The combined asymptotic–tolerance model of heat conduction in a skeletal micro-heterogeneous hollow cylinder	343-352
Mania, Radoslaw J. / Kolakowski, Zbigniew / Bienias, Jaroslaw / Jakubczak, Patryk / Majerski, Krzysztof	Comparative study of FML profiles buckling and postbuckling behaviour under axial loading	216-225
Juszkiewicz, Grzegorz / Nowak, Tomasz	Comparative study on thin and thick walled cylinder models subjected to thermo-mechanical loading	142-146
Ferdous, Wahid / Manalo, Allan / Van Erp, Gerard / Aravinthan, Thiru / Kaewunruen, Sakdirat / Remennikov, Alex	Composite railway sleepers – Recent developments, challenges and future prospects	158-168
Lim, Jun Woo / Lee, Dongyoung / Kim, Minkook / Choe, Jaeheon / Nam, Soohyun / Lee, Dai Gil	Composite structures for proton exchange membrane fuel cells (PEMFC) and energy storage systems (ESS): Review	927-949
Sobhy, Mohammed	A comprehensive study on FGM nanoplates embedded in an elastic medium	966-980
Duarte, Isabel / Vesenjak, Matej / Krstulović-Opara, Lovre / Ren, Zoran	Compressive performance evaluation of APM (Advanced Pore Morphology) foam filled tubes	409-420
Cárdenas, Diego / Elizalde, Hugo / Probst, Oliver / Lacarbonara, Walter / Marzocca, Pier / Aguilar, Enrique / Ramírez, Ricardo	Computationally efficient reduction of modal data from finite element models by nested sets of B-splines	549-564
Wang, Liang / Zheng, Chuanxiang / Luo, Hongying / Wei, Shuang / Wei, Zongxin	Continuum damage modeling and progressive failure analysis of carbon fiber/epoxy composite pressure vessel	475-482
Pasquali, Michele / Lacarbonara, Walter	Delamination detection in composite laminates using high-frequency P- and S-waves – Part I: Theory and analysis	1095-1108
Pasquali, Michele / Lacarbonara, Walter / Farrar, Charles R.	Delamination detection in composite laminates using high-frequency P- and S-waves – Part II: Experimental validation	1109-1117
Bondyra, Agnieszka / Klasztorny, Marian / Muc, Aleksander	Design of composite tank covers	72-81
Morozov, E. V. / Lopatin, A. V. / Taygin, V. B.	Design, fabrication and testing of composite sandwich integral structure of spacecraft antenna	645-653
Nam, Soohyun / Lee, Dongyoung / Kim, Jinwhan / Lee, Dai Gil	Development of the light weight carbon composite tie bar	124-131
Choe, Jaeheon / Lim, Jun Woo / Kim, Minkook / Kim, Jinwhan / Lee, Dai Gil	Durability of graphite coated carbon composite bipolar plates for vanadium redox flow batteries	106-113
Loja, M. A. R. / Barbosa, J. I. / Mota Soares, C. M.	Dynamic behaviour of soft core sandwich beam structures using kriging-based layerwise models	883-894
Chen, J. E. / Zhang, W. / Liu, J. / Sun, M.	Dynamic properties of truss core sandwich plate with tetrahedral core	869-882
Endrizzi, M. / Murat, B. I. S. / Fromme, P. / Olivo, A.	Edge-illumination X-ray dark-field imaging for visualising defects in composite structures	895-899
Xiong, Wei / Blackman, Bamber / Dear, John P. / Wang, Xichang	The effect of composite orientation on the mechanical properties of hybrid joints strengthened by surfi-sculpt	587-592
Koricho, Ermias G. / Khomenko, Anton / Haq, Mahmoodul / Drzal, Lawrence T. / Belingardi, Giovanni / Martorana, Brunetto	Effect of hybrid (micro- and nano-) fillers on impact response of GFRP composite	789-798
Merijs Meri, R. / Zicans, J. / Ivanova, T. / Berzina, R. / Saldabola, R. / Maksimovs, R.	The effect of introduction of montmorillonite clay (MMT) on the elastic properties of polycarbonate (PC) composition with acrylonitrile-butadiene styrene (ABS)	950-956
Batikha, M. / Alkam, F.	The effect of mechanical properties of masonry on the behavior of FRP-strengthened masonry-infilled RC frame under cyclic load	513-522
Falconieri, Diletta / Franco, Francesco	The effect of titanium insert repairs on the static strength of CFRP coupons and joints	799-810
Mårtensson, Per / Zenkert, Dan / Åkermo, Malin	Effects of manufacturing constraints on the cost and weight efficiency of integral and differential automotive composite structures	572-578
Sturm, R. / Heieck, F.	Energy absorption capacity of braided frames under bending loads	957-965
Rezaei, A. S. / Saidi, A. R.	Exact solution for free vibration of thick rectangular plates made of porous materials	1051-1060
Sánchez-Aparicio, Luis Javier / Ramos, Luís F. / Sena-Cruz, José / Barros, Joaquim O. / Riveiro, Belén	Experimental and numerical approaches for structural assessment in new footbridge designs (SFRSCC–GFPR hybrid structure)	95-105
Hazimeh, Rachad / Challita, Georges / Khalil, Khaled / Othman, Ramzi	Experimental investigation of the influence of substrates’ fibers orientations on the impact response of composite double-lap joints	82-89
Zhai, Yunong / Li, Dongsheng / Li, Xiaoqiang / Wang, Liang	An experimental study on the effect of joining interface condition on bearing response of single-lap, countersunk composite-aluminum bolted joints	190-198
Park, Juho / Choi, Hae-Jin	Experiments and numerical analyses of HB400 and aluminum foam sandwich structure under landmine explosion	726-739
Bhardwaj, G. / Singh, I. V. / Mishra, B. K.	Fatigue crack growth in functionally graded material using homogenized XIGA	269-284
Wu, Chao / Gunnion, Andrew J. / Chen, Bernard / Yan, Wenyi	Fatigue damage tolerance of two tapered composite patch configurations	654-662
Zidani, M'hamed Berrezoug / Belakhdar, Khalil / Tounsi, Abdelouahed / Bedia, El Abbes Adda	Finite element analysis of initially damaged beams repaired with FRP plates	429-439
Aksencer, Tolga / Aydogdu, Metin	Flapwise vibration of rotating composite beams	672-679
Jung, Kyung-Chae / Jeon, Guk-Jin / Bae, Ji-Hun / Chang, Seung-Hwan	Flexible cell culture device made of membrane-type silicone composites for simulating human body	36-43
Won, Jong-Pil / Lee, Jae-Ho / Lee, Su-Jin	Flexural behaviour of arch-type steel fibre reinforced cementitious composites	565-571
Bai, Xiaoming / Bessa, Miguel A. / Melro, António R. / Camanho, Pedro P. / Guo, Licheng / Liu, Wing K.	High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites	132-141
Karkon, Mohammad	Hybrid-Trefftz formulation for analysis of anisotropic and symmetric laminated plates	460-474
Gotkhindi, Tejas P. / Simha, K. R. Y.	In-plane elastic responses of circular cell honeycombs and bundled circular tubes in a diamond array structure	311-330
Dhiman, Sarvesh / Potluri, Prasad / Silva, Christopher	Influence of binder configuration on 3D woven composites	862-868
Urbaniak, Mariusz / Teter, Andrzej / Kubiak, Tomasz	Influence of boundary conditions on the critical and failure load in the GFPR channel cross-section columns subjected to compression	199-208
Irazu, Leire / Elejabarrieta, María Jesús	The influence of viscoelastic film thickness on the dynamic characteristics of thin sandwich structures	421-428
Boccardi, Simone / Carlomagno, Giovanni Maria / Meola, Carosena / Simeoli, Giorgio / Russo, Pietro	Infrared thermography to evaluate thermoplastic composites under bending load	900-904
Khalid, Hammad R. / Ha, S. K. / Park, S. M. / Kim, G. M. / Lee, H. K.	Interfacial bond behavior of FRP fabrics bonded to fiber-reinforced geopolymer mortar	353-368
Wong, E. H.	Interfacial stresses in sandwich structures subjected to temperature and mechanical loads	226-236
Mao, Lingtao / Chiang, Fu-Pen	Interior strain analysis of a woven composite beam using X-ray computed tomography and digital volumetric speckle photography	782-788
Hwang, June-Sun / Choi, Tae-Gyun / Lyu, Min-Young / Yang, Dong-Yol	Investigation for the bending modes of a semi-circular pyramidal kagome sandwich structure and the bending load calculation	10-17
Scattina, A. / Roncato, D. / Belingardi, G. / Martino, G.	Investigation of creep phenomenon on composite material for bolt connections	378-383
Jeon, Eun-Beom / Ahn, Sangkeun / Lee, In-Gyu / Koh, Hyo-In / Park, Junhong / Kim, Hak-Sung	Investigation of mechanical/dynamic properties of carbon fiber reinforced polymer concrete for low noise railway slab	27-35
Zhou, Wenbin / Zhang, Rubing / Ai, Shigang / He, Rujie / Pei, Yongmao / Fang, Daining	Load distribution in threads of porous metal–ceramic functionally graded composite joints subjected to thermomechanical loading	680-688
Garcia-Gonzalez, D. / Rodríguez-Millán, M. / Rusinek, A. / Arias, A.	Low temperature effect on impact energy absorption capability of PEEK composites	440-449
Düring, D. / Weiß, L. / Stefaniak, D. / Jordan, N. / Hühne, C.	Low-velocity impact response of composite laminates with steel and elastomer protective layer	18-26
Guo, Li / Zhang, HuaiWu / Lu, Ruoyu / Yu, GuoLiang	Magnetoelectric analysis of a bilayer piezoelectric/magnetostrictive composite system with interfacial effect	285-293
Feng, Peng / Meng, Xinmiao / Zhang, Hanqing	Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials	331-342
Lee, Dongyoung / Lim, Jun Woo / Nam, Soohyun / Choi, Ilbeom / Lee, Dai Gil	Method for exposing carbon fibers on composite bipolar plates	1-9
Fu, Xinwei / Ricci, Sergio / Bisagni, Chiara	Minimum-weight design for three dimensional woven composite stiffened panels using neural networks and genetic algorithms	708-715
Sousa, J. A. / Pereira, A. B. / Martins, A. P. / de Morais, A. B.	Mode II fatigue delamination of carbon/epoxy laminates using the end-notched flexure test	506-512
De Munck, Matthias / De Sutter, Sven / Verbruggen, Svetlana / Tysmans, Tine / Filomeno Coelho, Rajan	Multi-objective weight and cost optimization of hybrid composite-concrete beams	369-377
Jain, Atul / Abdin, Yasmine / Van Paepegem, Wim / Verpoest, Ignaas / Lomov, Stepan V.	Non-symmetric stiffness tensor prediction by the Mori–Tanaka scheme – Comments on the article "Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models" [Composite Structures 131 (2015) 692–706]	1118-1119
Meola, C. / Boccardi, S. / Carlomagno, G. M. / Boffa, N. D. / Monaco, E. / Ricci, F.	Nondestructive evaluation of carbon fibre reinforced composites with infrared thermography and ultrasonics	845-853
Bodjona, Kobye / Lessard, Larry	Nonlinear static analysis of a composite bonded/bolted single-lap joint using the meshfree radial point interpolation method	1024-1035
Bahrami, Arian / Teimourian, Amir	Nonlocal scale effects on buckling, vibration and wave reflection in nanobeams via wave propagation approach	1061-1075
Lee, Ha Eun / Han, Song Hee / Song, Seung A. / Kim, Seong Su	Novel fabrication process for carbon fiber composite bipolar plates using sol gel and the double percolation effect for PEMFC	44-51
Pascal, F. / Navarro, P. / Marguet, S. / Ferrero, J-F.	On the modelling of low to medium velocity impact onto woven composite materials with a 2D semi-continuous approach	302-310
Mazurkiewicz, Łukasz / Małachowski, Jerzy / Baranowski, Paweł	Optimization of protective panel for critical supporting elements	493-505
Won, Jong-Pil / Lee, Jae-Ho / Lee, Su-Jin	Predicting pull-out behaviour based on the bond mechanism of arch-type steel fibre in cementitious composite	633-644
Yoon, Sung Ho / Oh, Jin Oh	Prediction of long term performance for GRP pipes under sustained internal pressure	185-189
Zhang, Diantang / Sun, Ying / Wang, Xinmiao / Chen, Li	Prediction of macro-mechanical properties of 3D braided composites based on fiber embedded matrix method	393-408
Loutas, T. H. / Charlaftis, P. / Airoldi, A. / Bettini, P. / Koimtzoglou, C. / Kostopoulos, V.	Reliability of strain monitoring of composite structures via the use of optical fiber ribbon tapes for structural health monitoring purposes	762-771
Mantari, J. L. / Yarasca, J.	A simple and accurate generalized shear deformation theory for beams	593-601
Mirzaei, M. / Kiani, Y.	Snap-through phenomenon in a thermally postbuckled temperature dependent sandwich beam with FG-CNTRC face sheets	1004-1013
Kim, Bo-Seung / Cho, Sung-Jin / Min, Dong-Ki / Park, Junhong	Sound absorption structure in helical shapes made using fibrous paper	90-94
Park, Ilwook / Lee, Usik	Spectral element modeling and analysis of the transverse vibration of a laminated composite plate	905-917
Friedrich, Linus / Loosen, Simon / Liang, Ke / Ruess, Martin / Bisagni, Chiara / Schröder, Kai-Uwe	Stacking sequence influence on imperfection sensitivity of cylindrical composite shells under axial compression	750-761
Zhang, L. W. / Song, Z. G. / Liew, K. M.	State-space Levy method for vibration analysis of FG-CNT composite plates subjected to in-plane loads based on higher-order shear deformation theory	989-1003
Kim, Hongseop / Kim, Gyuyong / Nam, Jeongsoo / Kim, Junghyun / Han, Sanghyu / Lee, Sanggyu	Static mechanical properties and impact resistance of amorphous metallic fiber-reinforced concrete	831-844
De Santis, Stefano / de Felice, Gianmarco	Steel reinforced grout systems for the strengthening of masonry structures	533-548
Li, Pengda / Wu, Yu-Fei	Stress–strain model of FRP confined concrete under cyclic loading	60-71
Nwogu, Ngozi Claribelle / Kajama, Mohammed / Gobina, Edward	A study of gas diffusion characteristics on a micro porous composite silica ceramic membrane	1044-1050
Jachimowicz, Jerzy / Szymczyk, Elżbieta / Puchała, Krzysztof	Study of material mass efficiency and numerical analysis of modified CFRP laminate in bearing conditions	114-123
Choe, Kang Yeong / On, Seung Yoon / Song, Seung A. / Lim, Jun Woo / You, Jun Il / Kim, Seong Su	Study of the endurance performance of composite journal bearings under the oil cut situation	772-781
Fraternali, F. / Carpentieri, G. / Modano, M. / Fabbrocino, F. / Skelton, R. E.	A tensegrity approach to the optimal reinforcement of masonry domes and vaults through fiber-reinforced composite materials	247-254
Arash, Behrouz / Park, Harold S. / Rabczuk, Timon	Tensile fracture behavior of short carbon nanotube reinforced polymer composites: A coarse-grained model	981-988
Daghia, F. / Zhang, F. / Cluzel, C. / Ladevèze, P.	Thermo-mechano-oxidative behavior at the ply’s scale: The effect of oxidation on transverse cracking in carbon–epoxy composites	602-612
Pazera, E. / Jędrysiak, J.	Thermoelastic phenomena in transversally graded laminates	663-671
Marczak, Jakub / Jędrysiak, Jarosław	Tolerance modelling of vibrations of periodic three-layered plates with inert core	854-861
LeBlanc, James / Shukla, Arun	Underwater explosion response of curved composite plates	716-725
Irshidat, Mohammad R. / Al-Saleh, Mohammed H. / Al-Shoubaki, Mahmoud	Using carbon nanotubes to improve strengthening efficiency of carbon fiber/epoxy composites confined RC columns	523-532
Song, Xuyuan / Han, Qingkai / Zhai, Jingyu	Vibration analyses of symmetrically laminated composite cylindrical shells with arbitrary boundaries conditions via Rayleigh–Ritz method	820-830
shahriari, B. / Karamooz Ravari, M. R. / Zeighampour, H.	Vibration analysis of functionally graded carbon nanotube-reinforced composite nanoplates using Mindlin’s strain gradient theory	1036-1043
Sheikh, Abdul Hamid / Asadi, Arash / Thomsen, Ole Thybo	Vibration of thin-walled laminated composite beams having open and closed sections	209-215
Qu, Yegao / Meng, Guang	Vibro-acoustic analysis of multilayered shells of revolution based on a general higher-order shear deformable zig-zag theory	689-707
Gong, Xiaobo / Huang, Jian / Scarpa, Fabrizio / Liu, Yanju / Leng, Jinsong	Zero Poisson’s ratio cellular structure for two-dimensional morphing applications	384-392
Souri, H. / Nam, I. W. / Lee, H. K.	A zinc oxide/polyurethane-based generator composite as a self-powered sensor for traffic flow monitoring	579-586

About this
data sheet
IssueID
37854
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - December 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - December 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.