Composite Structures - Dezember 2015

Erschienen:	Dezember 2015

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Yu, Hong / Heider, Dirk / Advani, Suresh	A 3D microstructure based resistor network model for the electrical resistivity of unidirectional carbon composites	740-749
Garrido, Mário / Correia, João R. / Keller, Thomas / Branco, Fernando A.	Adhesively bonded connections between composite sandwich floor panels for building rehabilitation	255-268
Atutis, Mantas / Valivonis, Juozas / Atutis, Edgaras	Analysis of serviceability limit state of GFRP prestressed concrete beams	450-459
Liu, Qimao	Analytical sensitivity analysis of eigenvalues and lightweight design of composite laminated beams	918-926
Kulkarni, Kamlesh / Singh, B. N. / Maiti, D. K.	Analytical solution for bending and buckling analysis of functionally graded plates using inverse trigonometric shear deformation theory	147-157
Zahr Viñuela, J. / Pérez-Castellanos, J. L.	The anisotropic criterion of von Mises (1928) as a yield condition for PMMCs. A calibration procedure based on numerical cell-analysis	613-632
Turkalj, Goran / Lanc, Domagoj / Brnić, Josip / Pesic, Igor	A beam formulation for large displacement analysis of composite frames with semi-rigid connections	237-246
Akgöz, Bekir / Civalek, Ömer	Bending analysis of FG microbeams resting on Winkler elastic foundation via strain gradient elasticity	294-301
Cernescu, Anghel / Romanoff, Jani	Bending deflection of sandwich beams considering local effect of concentrated force	169-175
Harvey, C. M. / Wood, J. D. / Wang, S.	Brittle interfacial cracking between two dissimilar elastic layers: Part 1—Analytical development	1076-1086
Harvey, C. M. / Wood, J. D. / Wang, S.	Brittle interfacial cracking between two dissimilar elastic layers: Part 2—Numerical verification	1087-1094
Schmitz, A. / Horst, P.	Buckling of multiple discrete composite bundles in the elastomeric foundation of a curvature-morphing skin	1014-1023
Lim, Jun Woo / Lee, Dai Gil	Carbon fiber/polyethylene bipolar plate-carbon felt electrode assembly for vanadium redox flow batteries (VRFB)	483-492
Latko, Paulina / Rumiński, Witalis / Boczkowska, Anna	Carbon nanotubes-doped veils	52-59
Boris, Renata / Kerienė, Jadvyga Regina / Antonovič, Valentin / Madej, Dominika	Characterization of microstructural evolution and mechanical properties of refractory composite	811-819
Wang, Chen / Xu, Xiwu	Cohesive element analysis of fatigue delamination propagation in composite materials with improved crack tip tracking algorism	176-184
Ostrowski, Piotr / Michalak, Bohdan	The combined asymptotic–tolerance model of heat conduction in a skeletal micro-heterogeneous hollow cylinder	343-352
Mania, Radoslaw J. / Kolakowski, Zbigniew / Bienias, Jaroslaw / Jakubczak, Patryk / Majerski, Krzysztof	Comparative study of FML profiles buckling and postbuckling behaviour under axial loading	216-225
Juszkiewicz, Grzegorz / Nowak, Tomasz	Comparative study on thin and thick walled cylinder models subjected to thermo-mechanical loading	142-146
Ferdous, Wahid / Manalo, Allan / Van Erp, Gerard / Aravinthan, Thiru / Kaewunruen, Sakdirat / Remennikov, Alex	Composite railway sleepers – Recent developments, challenges and future prospects	158-168
Lim, Jun Woo / Lee, Dongyoung / Kim, Minkook / Choe, Jaeheon / Nam, Soohyun / Lee, Dai Gil	Composite structures for proton exchange membrane fuel cells (PEMFC) and energy storage systems (ESS): Review	927-949
Sobhy, Mohammed	A comprehensive study on FGM nanoplates embedded in an elastic medium	966-980
Duarte, Isabel / Vesenjak, Matej / Krstulović-Opara, Lovre / Ren, Zoran	Compressive performance evaluation of APM (Advanced Pore Morphology) foam filled tubes	409-420
Cárdenas, Diego / Elizalde, Hugo / Probst, Oliver / Lacarbonara, Walter / Marzocca, Pier / Aguilar, Enrique / Ramírez, Ricardo	Computationally efficient reduction of modal data from finite element models by nested sets of B-splines	549-564
Wang, Liang / Zheng, Chuanxiang / Luo, Hongying / Wei, Shuang / Wei, Zongxin	Continuum damage modeling and progressive failure analysis of carbon fiber/epoxy composite pressure vessel	475-482
Pasquali, Michele / Lacarbonara, Walter	Delamination detection in composite laminates using high-frequency P- and S-waves – Part I: Theory and analysis	1095-1108
Pasquali, Michele / Lacarbonara, Walter / Farrar, Charles R.	Delamination detection in composite laminates using high-frequency P- and S-waves – Part II: Experimental validation	1109-1117
Bondyra, Agnieszka / Klasztorny, Marian / Muc, Aleksander	Design of composite tank covers	72-81
Morozov, E. V. / Lopatin, A. V. / Taygin, V. B.	Design, fabrication and testing of composite sandwich integral structure of spacecraft antenna	645-653
Nam, Soohyun / Lee, Dongyoung / Kim, Jinwhan / Lee, Dai Gil	Development of the light weight carbon composite tie bar	124-131
Choe, Jaeheon / Lim, Jun Woo / Kim, Minkook / Kim, Jinwhan / Lee, Dai Gil	Durability of graphite coated carbon composite bipolar plates for vanadium redox flow batteries	106-113
Loja, M. A. R. / Barbosa, J. I. / Mota Soares, C. M.	Dynamic behaviour of soft core sandwich beam structures using kriging-based layerwise models	883-894
Chen, J. E. / Zhang, W. / Liu, J. / Sun, M.	Dynamic properties of truss core sandwich plate with tetrahedral core	869-882
Endrizzi, M. / Murat, B. I. S. / Fromme, P. / Olivo, A.	Edge-illumination X-ray dark-field imaging for visualising defects in composite structures	895-899
Xiong, Wei / Blackman, Bamber / Dear, John P. / Wang, Xichang	The effect of composite orientation on the mechanical properties of hybrid joints strengthened by surfi-sculpt	587-592
Koricho, Ermias G. / Khomenko, Anton / Haq, Mahmoodul / Drzal, Lawrence T. / Belingardi, Giovanni / Martorana, Brunetto	Effect of hybrid (micro- and nano-) fillers on impact response of GFRP composite	789-798
Merijs Meri, R. / Zicans, J. / Ivanova, T. / Berzina, R. / Saldabola, R. / Maksimovs, R.	The effect of introduction of montmorillonite clay (MMT) on the elastic properties of polycarbonate (PC) composition with acrylonitrile-butadiene styrene (ABS)	950-956
Batikha, M. / Alkam, F.	The effect of mechanical properties of masonry on the behavior of FRP-strengthened masonry-infilled RC frame under cyclic load	513-522
Falconieri, Diletta / Franco, Francesco	The effect of titanium insert repairs on the static strength of CFRP coupons and joints	799-810
Mårtensson, Per / Zenkert, Dan / Åkermo, Malin	Effects of manufacturing constraints on the cost and weight efficiency of integral and differential automotive composite structures	572-578
Sturm, R. / Heieck, F.	Energy absorption capacity of braided frames under bending loads	957-965
Rezaei, A. S. / Saidi, A. R.	Exact solution for free vibration of thick rectangular plates made of porous materials	1051-1060
Sánchez-Aparicio, Luis Javier / Ramos, Luís F. / Sena-Cruz, José / Barros, Joaquim O. / Riveiro, Belén	Experimental and numerical approaches for structural assessment in new footbridge designs (SFRSCC–GFPR hybrid structure)	95-105
Hazimeh, Rachad / Challita, Georges / Khalil, Khaled / Othman, Ramzi	Experimental investigation of the influence of substrates’ fibers orientations on the impact response of composite double-lap joints	82-89
Zhai, Yunong / Li, Dongsheng / Li, Xiaoqiang / Wang, Liang	An experimental study on the effect of joining interface condition on bearing response of single-lap, countersunk composite-aluminum bolted joints	190-198
Park, Juho / Choi, Hae-Jin	Experiments and numerical analyses of HB400 and aluminum foam sandwich structure under landmine explosion	726-739
Bhardwaj, G. / Singh, I. V. / Mishra, B. K.	Fatigue crack growth in functionally graded material using homogenized XIGA	269-284
Wu, Chao / Gunnion, Andrew J. / Chen, Bernard / Yan, Wenyi	Fatigue damage tolerance of two tapered composite patch configurations	654-662
Zidani, M'hamed Berrezoug / Belakhdar, Khalil / Tounsi, Abdelouahed / Bedia, El Abbes Adda	Finite element analysis of initially damaged beams repaired with FRP plates	429-439
Aksencer, Tolga / Aydogdu, Metin	Flapwise vibration of rotating composite beams	672-679
Jung, Kyung-Chae / Jeon, Guk-Jin / Bae, Ji-Hun / Chang, Seung-Hwan	Flexible cell culture device made of membrane-type silicone composites for simulating human body	36-43
Won, Jong-Pil / Lee, Jae-Ho / Lee, Su-Jin	Flexural behaviour of arch-type steel fibre reinforced cementitious composites	565-571
Bai, Xiaoming / Bessa, Miguel A. / Melro, António R. / Camanho, Pedro P. / Guo, Licheng / Liu, Wing K.	High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites	132-141
Karkon, Mohammad	Hybrid-Trefftz formulation for analysis of anisotropic and symmetric laminated plates	460-474
Gotkhindi, Tejas P. / Simha, K. R. Y.	In-plane elastic responses of circular cell honeycombs and bundled circular tubes in a diamond array structure	311-330
Dhiman, Sarvesh / Potluri, Prasad / Silva, Christopher	Influence of binder configuration on 3D woven composites	862-868
Urbaniak, Mariusz / Teter, Andrzej / Kubiak, Tomasz	Influence of boundary conditions on the critical and failure load in the GFPR channel cross-section columns subjected to compression	199-208
Irazu, Leire / Elejabarrieta, María Jesús	The influence of viscoelastic film thickness on the dynamic characteristics of thin sandwich structures	421-428
Boccardi, Simone / Carlomagno, Giovanni Maria / Meola, Carosena / Simeoli, Giorgio / Russo, Pietro	Infrared thermography to evaluate thermoplastic composites under bending load	900-904
Khalid, Hammad R. / Ha, S. K. / Park, S. M. / Kim, G. M. / Lee, H. K.	Interfacial bond behavior of FRP fabrics bonded to fiber-reinforced geopolymer mortar	353-368
Wong, E. H.	Interfacial stresses in sandwich structures subjected to temperature and mechanical loads	226-236
Mao, Lingtao / Chiang, Fu-Pen	Interior strain analysis of a woven composite beam using X-ray computed tomography and digital volumetric speckle photography	782-788
Hwang, June-Sun / Choi, Tae-Gyun / Lyu, Min-Young / Yang, Dong-Yol	Investigation for the bending modes of a semi-circular pyramidal kagome sandwich structure and the bending load calculation	10-17
Scattina, A. / Roncato, D. / Belingardi, G. / Martino, G.	Investigation of creep phenomenon on composite material for bolt connections	378-383
Jeon, Eun-Beom / Ahn, Sangkeun / Lee, In-Gyu / Koh, Hyo-In / Park, Junhong / Kim, Hak-Sung	Investigation of mechanical/dynamic properties of carbon fiber reinforced polymer concrete for low noise railway slab	27-35
Zhou, Wenbin / Zhang, Rubing / Ai, Shigang / He, Rujie / Pei, Yongmao / Fang, Daining	Load distribution in threads of porous metal–ceramic functionally graded composite joints subjected to thermomechanical loading	680-688
Garcia-Gonzalez, D. / Rodríguez-Millán, M. / Rusinek, A. / Arias, A.	Low temperature effect on impact energy absorption capability of PEEK composites	440-449
Düring, D. / Weiß, L. / Stefaniak, D. / Jordan, N. / Hühne, C.	Low-velocity impact response of composite laminates with steel and elastomer protective layer	18-26
Guo, Li / Zhang, HuaiWu / Lu, Ruoyu / Yu, GuoLiang	Magnetoelectric analysis of a bilayer piezoelectric/magnetostrictive composite system with interfacial effect	285-293
Feng, Peng / Meng, Xinmiao / Zhang, Hanqing	Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials	331-342
Lee, Dongyoung / Lim, Jun Woo / Nam, Soohyun / Choi, Ilbeom / Lee, Dai Gil	Method for exposing carbon fibers on composite bipolar plates	1-9
Fu, Xinwei / Ricci, Sergio / Bisagni, Chiara	Minimum-weight design for three dimensional woven composite stiffened panels using neural networks and genetic algorithms	708-715
Sousa, J. A. / Pereira, A. B. / Martins, A. P. / de Morais, A. B.	Mode II fatigue delamination of carbon/epoxy laminates using the end-notched flexure test	506-512
De Munck, Matthias / De Sutter, Sven / Verbruggen, Svetlana / Tysmans, Tine / Filomeno Coelho, Rajan	Multi-objective weight and cost optimization of hybrid composite-concrete beams	369-377
Jain, Atul / Abdin, Yasmine / Van Paepegem, Wim / Verpoest, Ignaas / Lomov, Stepan V.	Non-symmetric stiffness tensor prediction by the Mori–Tanaka scheme – Comments on the article "Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models" [Composite Structures 131 (2015) 692–706]	1118-1119
Meola, C. / Boccardi, S. / Carlomagno, G. M. / Boffa, N. D. / Monaco, E. / Ricci, F.	Nondestructive evaluation of carbon fibre reinforced composites with infrared thermography and ultrasonics	845-853
Bodjona, Kobye / Lessard, Larry	Nonlinear static analysis of a composite bonded/bolted single-lap joint using the meshfree radial point interpolation method	1024-1035
Bahrami, Arian / Teimourian, Amir	Nonlocal scale effects on buckling, vibration and wave reflection in nanobeams via wave propagation approach	1061-1075
Lee, Ha Eun / Han, Song Hee / Song, Seung A. / Kim, Seong Su	Novel fabrication process for carbon fiber composite bipolar plates using sol gel and the double percolation effect for PEMFC	44-51
Pascal, F. / Navarro, P. / Marguet, S. / Ferrero, J-F.	On the modelling of low to medium velocity impact onto woven composite materials with a 2D semi-continuous approach	302-310
Mazurkiewicz, Łukasz / Małachowski, Jerzy / Baranowski, Paweł	Optimization of protective panel for critical supporting elements	493-505
Won, Jong-Pil / Lee, Jae-Ho / Lee, Su-Jin	Predicting pull-out behaviour based on the bond mechanism of arch-type steel fibre in cementitious composite	633-644
Yoon, Sung Ho / Oh, Jin Oh	Prediction of long term performance for GRP pipes under sustained internal pressure	185-189
Zhang, Diantang / Sun, Ying / Wang, Xinmiao / Chen, Li	Prediction of macro-mechanical properties of 3D braided composites based on fiber embedded matrix method	393-408
Loutas, T. H. / Charlaftis, P. / Airoldi, A. / Bettini, P. / Koimtzoglou, C. / Kostopoulos, V.	Reliability of strain monitoring of composite structures via the use of optical fiber ribbon tapes for structural health monitoring purposes	762-771
Mantari, J. L. / Yarasca, J.	A simple and accurate generalized shear deformation theory for beams	593-601
Mirzaei, M. / Kiani, Y.	Snap-through phenomenon in a thermally postbuckled temperature dependent sandwich beam with FG-CNTRC face sheets	1004-1013
Kim, Bo-Seung / Cho, Sung-Jin / Min, Dong-Ki / Park, Junhong	Sound absorption structure in helical shapes made using fibrous paper	90-94
Park, Ilwook / Lee, Usik	Spectral element modeling and analysis of the transverse vibration of a laminated composite plate	905-917
Friedrich, Linus / Loosen, Simon / Liang, Ke / Ruess, Martin / Bisagni, Chiara / Schröder, Kai-Uwe	Stacking sequence influence on imperfection sensitivity of cylindrical composite shells under axial compression	750-761
Zhang, L. W. / Song, Z. G. / Liew, K. M.	State-space Levy method for vibration analysis of FG-CNT composite plates subjected to in-plane loads based on higher-order shear deformation theory	989-1003
Kim, Hongseop / Kim, Gyuyong / Nam, Jeongsoo / Kim, Junghyun / Han, Sanghyu / Lee, Sanggyu	Static mechanical properties and impact resistance of amorphous metallic fiber-reinforced concrete	831-844
De Santis, Stefano / de Felice, Gianmarco	Steel reinforced grout systems for the strengthening of masonry structures	533-548
Li, Pengda / Wu, Yu-Fei	Stress–strain model of FRP confined concrete under cyclic loading	60-71
Nwogu, Ngozi Claribelle / Kajama, Mohammed / Gobina, Edward	A study of gas diffusion characteristics on a micro porous composite silica ceramic membrane	1044-1050
Jachimowicz, Jerzy / Szymczyk, Elżbieta / Puchała, Krzysztof	Study of material mass efficiency and numerical analysis of modified CFRP laminate in bearing conditions	114-123
Choe, Kang Yeong / On, Seung Yoon / Song, Seung A. / Lim, Jun Woo / You, Jun Il / Kim, Seong Su	Study of the endurance performance of composite journal bearings under the oil cut situation	772-781
Fraternali, F. / Carpentieri, G. / Modano, M. / Fabbrocino, F. / Skelton, R. E.	A tensegrity approach to the optimal reinforcement of masonry domes and vaults through fiber-reinforced composite materials	247-254
Arash, Behrouz / Park, Harold S. / Rabczuk, Timon	Tensile fracture behavior of short carbon nanotube reinforced polymer composites: A coarse-grained model	981-988
Daghia, F. / Zhang, F. / Cluzel, C. / Ladevèze, P.	Thermo-mechano-oxidative behavior at the ply’s scale: The effect of oxidation on transverse cracking in carbon–epoxy composites	602-612
Pazera, E. / Jędrysiak, J.	Thermoelastic phenomena in transversally graded laminates	663-671
Marczak, Jakub / Jędrysiak, Jarosław	Tolerance modelling of vibrations of periodic three-layered plates with inert core	854-861
LeBlanc, James / Shukla, Arun	Underwater explosion response of curved composite plates	716-725
Irshidat, Mohammad R. / Al-Saleh, Mohammed H. / Al-Shoubaki, Mahmoud	Using carbon nanotubes to improve strengthening efficiency of carbon fiber/epoxy composites confined RC columns	523-532
Song, Xuyuan / Han, Qingkai / Zhai, Jingyu	Vibration analyses of symmetrically laminated composite cylindrical shells with arbitrary boundaries conditions via Rayleigh–Ritz method	820-830
shahriari, B. / Karamooz Ravari, M. R. / Zeighampour, H.	Vibration analysis of functionally graded carbon nanotube-reinforced composite nanoplates using Mindlin’s strain gradient theory	1036-1043
Sheikh, Abdul Hamid / Asadi, Arash / Thomsen, Ole Thybo	Vibration of thin-walled laminated composite beams having open and closed sections	209-215
Qu, Yegao / Meng, Guang	Vibro-acoustic analysis of multilayered shells of revolution based on a general higher-order shear deformable zig-zag theory	689-707
Gong, Xiaobo / Huang, Jian / Scarpa, Fabrizio / Liu, Yanju / Leng, Jinsong	Zero Poisson’s ratio cellular structure for two-dimensional morphing applications	384-392
Souri, H. / Nam, I. W. / Lee, H. K.	A zinc oxide/polyurethane-based generator composite as a self-powered sensor for traffic flow monitoring	579-586

Über diese
Datenseite
IssueID
37854
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - Dezember 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Dezember 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.