Composite Structures - March 2016

Published:	March 2016

Articles in this Issue

Author(s)	Title	Page(s)
Nguyen, Tan-Tien / Kim, Nam-Il / Lee, Jaehong	Analysis of thin-walled open-section beams with functionally graded materials	75-83
Sreehari, V. M. / George, Linju Joseph / Maiti, D. K.	Bending and buckling analysis of smart composite plates with and without internal flaw using an inverse hyperbolic shear deformation theory	64-74
Xu, Guo-dong / Yang, Fan / Zeng, Tao / Cheng, Su / Wang, Zhi-hai	Bending behavior of graded corrugated truss core composite sandwich beams	342-351
Mohammadimehr, M. / Salemi, M. / Rousta Navi, B.	Bending, buckling, and free vibration analysis of MSGT microcomposite Reddy plate reinforced by FG-SWCNTs with temperature-dependent material properties under hydro-thermo-mechanical loadings using DQM	361-380
Gong, Wenran / Chen, Jinlong / Patterson, Eann A.	Buckling and delamination growth behaviour of delaminated composite panels subject to four-point bending	122-133
Choi, Jeong-Il / Song, Keum-Il / Song, Jin-Kyu / Lee, Bang Yeon	Composite properties of high-strength polyethylene fiber-reinforced cement and cementless composites	116-121
Ding, Yining / Han, Zhibo / Zhang, Yulin / Aguiar, J. B.	Concrete with triphasic conductive materials for self-monitoring of cracking development subjected to flexure	184-191
Yang, Xiao / Bai, Yu / Luo, Fu Jia / Zhao, Xiao-Ling / Ding, Faxing	Dynamic and fatigue performances of a large-scale space frame assembled using pultruded GFRP composites	227-236
Kiseleva, Tatiana / Zholudev, Sergey / Novakova, Alla / Grigoryeva, Tatiana	The enhanced magnetodeformational effect in Galfenol/polyurethane nanocomposites by the arrangement of particle chains	12-16
Lai, Huan Sheng	Estimation of Ct of functionally graded materials under small scale creep stage	352-360
San Juan, Víctor / Fernández, Eduardo / Pincheira, Gonzalo / Meléndrez, Manuel / Flores, Paulo	Evaluation of the fill yarns effect on the out-of-plane compressive fatigue behavior for an unidirectional glass fiber reinforced epoxy composite	237-242
Zhang, Tiejun / Li, Shulin / Chang, Fei / Shi, Xiaopeng / Li, Lekun	An experimental and numerical analysis for stiffened composite panel subjected to shear loading in hygrothermal environment	107-115
Li, N. / Chen, P. H.	Experimental investigation on edge impact damage and Compression-After-Impact (CAI) behavior of stiffened composite panels	134-150
Yildirim, Tanju / Ghayesh, Mergen H. / Li, Weihua / Alici, Gursel	Experimental nonlinear dynamics of a geometrically imperfect magneto-rheological elastomer sandwich beam	381-390
Gönen, Seza Özge / Erol Taygun, Melek / Küçükbayrak, Sadriye	Fabrication of bioactive glass containing nanocomposite fiber mats for bone tissue engineering applications	96-106
Hu, Haixiao / Li, Shuxin / Wang, Jihui / Wang, Yanming / Zu, Lei	FBG-based real-time evaluation of transverse cracking in cross-ply laminates	151-160
Chen, Shunhua / Zang, Mengyan / Wang, Di / Zheng, Zumei / Zhao, Chunlai	Finite element modelling of impact damage in polyvinyl butyral laminated glass	1-11
Rashedi, A. / Sridhar, I. / Tseng, K. J.	Fracture characterization of glass fiber composite laminate under experimental biaxial loading	17-29
Kalfat, R. / Nazari, A. / Al-Mahaidi, R. / Sanjayan, J.	Genetic programming in the simulation of Frp-to-concrete patch-anchored joints	305-312
Sarangan, Suganyadevi / Singh, B. N.	Higher-order closed-form solution for the analysis of laminated composite and sandwich plates based on new shear deformation theories	391-403
Freddi, Francesco / Sacco, Elio	An interphase model for the analysis of the masonry-FRP bond	322-334
Junyan, Liu / Fei, Wang / Yang, Liu / Yang, Wang	Inverse methodology for identification the thermal diffusivity and subsurface defect of CFRP composite by lock-in thermographic phase (LITP) profile reconstruction	214-226
Kalantari, Mehdi / Dong, Chensong / Davies, Ian J.	Multi-objective robust optimisation of unidirectional carbon/glass fibre reinforced hybrid composites under flexural loading	264-275
Meng, M. / Rizvi, M. J. / Le, H. R. / Grove, S. M.	Multi-scale modelling of moisture diffusion coupled with stress distribution in CFRP laminated composites	295-304
Biscaia, Hugo C. / Borba, Isabel S. / Silva, Cinderela / Chastre, Carlos	A nonlinear analytical model to predict the full-range debonding process of FRP-to-parent material interfaces free of any mechanical anchorage devices	52-63
Lu, Zi-Xing / Li, Xiang / Yang, Zhen-Yu / Xie, Fan	Novel structure with negative Poisson’s ratio and enhanced Young’s modulus	243-252
Liu, Peng / Cheng, Xiaoquan / Wang, Songwei / Liu, Shufeng / Cheng, Yujia	Numerical analysis of bearing failure in countersunk composite joints using 3D explicit simulation method	30-39
Feito, N. / Díaz-Álvarez, J. / López-Puente, J. / Miguélez, M. H.	Numerical analysis of the influence of tool wear and special cutting geometry when drilling woven CFRPs	285-294
Catalanotti, G.	On the generation of RVE-based models of composites reinforced with long fibres or spherical particles	84-95
Sun, Chaoyang / Huang, Zaixing	Peridynamic simulation to impacting damage in composite laminate	335-341
Bich, Dao Huy / Ninh, Dinh Gia	Post-buckling of sigmoid-functionally graded material toroidal shell segment surrounded by an elastic foundation under thermo-mechanical loads	253-263
Manshadi, Behzad D. / Vassilopoulos, Anastasios P. / Keller, Thomas	Post-wrinkling behavior of webs in GFRP cell-core sandwich structures	276-284
Zhang, L. W. / Liew, K. M.	Postbuckling analysis of axially compressed CNT reinforced functionally graded composite plates resting on Pasternak foundations using an element-free approach	40-51
Jing, Li-long / Ming, Ping-jian / Zhang, Wen-ping / Fu, Li-rong / Cao, Yi-peng	Static and free vibration analysis of functionally graded beams by combination Timoshenko theory and finite volume method	192-213
Brown, Dylan N. / Parks, Joel E. / Ameli, M. J. / Pantelides, Chris P.	Strut-and-tie models of repaired precast concrete bridge substructures with CFRP shell	161-171
Pasternak, Elena / Shufrin, Igor / Dyskin, Arcady V.	Thermal stresses in hybrid materials with auxetic inclusions	313-321
Jafari-Talookolaei, Ramazan-Ali / Abedi, Maryam / Hajianmaleki, Mehdi	Vibration characteristics of generally laminated composite curved beams with single through-the-width delamination	172-183

About this
data sheet
IssueID
37851
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - March 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - March 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.