Composite Structures - mars 2016

Publié:	mars 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Nguyen, Tan-Tien / Kim, Nam-Il / Lee, Jaehong	Analysis of thin-walled open-section beams with functionally graded materials	75-83
Sreehari, V. M. / George, Linju Joseph / Maiti, D. K.	Bending and buckling analysis of smart composite plates with and without internal flaw using an inverse hyperbolic shear deformation theory	64-74
Xu, Guo-dong / Yang, Fan / Zeng, Tao / Cheng, Su / Wang, Zhi-hai	Bending behavior of graded corrugated truss core composite sandwich beams	342-351
Mohammadimehr, M. / Salemi, M. / Rousta Navi, B.	Bending, buckling, and free vibration analysis of MSGT microcomposite Reddy plate reinforced by FG-SWCNTs with temperature-dependent material properties under hydro-thermo-mechanical loadings using DQM	361-380
Gong, Wenran / Chen, Jinlong / Patterson, Eann A.	Buckling and delamination growth behaviour of delaminated composite panels subject to four-point bending	122-133
Choi, Jeong-Il / Song, Keum-Il / Song, Jin-Kyu / Lee, Bang Yeon	Composite properties of high-strength polyethylene fiber-reinforced cement and cementless composites	116-121
Ding, Yining / Han, Zhibo / Zhang, Yulin / Aguiar, J. B.	Concrete with triphasic conductive materials for self-monitoring of cracking development subjected to flexure	184-191
Yang, Xiao / Bai, Yu / Luo, Fu Jia / Zhao, Xiao-Ling / Ding, Faxing	Dynamic and fatigue performances of a large-scale space frame assembled using pultruded GFRP composites	227-236
Kiseleva, Tatiana / Zholudev, Sergey / Novakova, Alla / Grigoryeva, Tatiana	The enhanced magnetodeformational effect in Galfenol/polyurethane nanocomposites by the arrangement of particle chains	12-16
Lai, Huan Sheng	Estimation of Ct of functionally graded materials under small scale creep stage	352-360
San Juan, Víctor / Fernández, Eduardo / Pincheira, Gonzalo / Meléndrez, Manuel / Flores, Paulo	Evaluation of the fill yarns effect on the out-of-plane compressive fatigue behavior for an unidirectional glass fiber reinforced epoxy composite	237-242
Zhang, Tiejun / Li, Shulin / Chang, Fei / Shi, Xiaopeng / Li, Lekun	An experimental and numerical analysis for stiffened composite panel subjected to shear loading in hygrothermal environment	107-115
Li, N. / Chen, P. H.	Experimental investigation on edge impact damage and Compression-After-Impact (CAI) behavior of stiffened composite panels	134-150
Yildirim, Tanju / Ghayesh, Mergen H. / Li, Weihua / Alici, Gursel	Experimental nonlinear dynamics of a geometrically imperfect magneto-rheological elastomer sandwich beam	381-390
Gönen, Seza Özge / Erol Taygun, Melek / Küçükbayrak, Sadriye	Fabrication of bioactive glass containing nanocomposite fiber mats for bone tissue engineering applications	96-106
Hu, Haixiao / Li, Shuxin / Wang, Jihui / Wang, Yanming / Zu, Lei	FBG-based real-time evaluation of transverse cracking in cross-ply laminates	151-160
Chen, Shunhua / Zang, Mengyan / Wang, Di / Zheng, Zumei / Zhao, Chunlai	Finite element modelling of impact damage in polyvinyl butyral laminated glass	1-11
Rashedi, A. / Sridhar, I. / Tseng, K. J.	Fracture characterization of glass fiber composite laminate under experimental biaxial loading	17-29
Kalfat, R. / Nazari, A. / Al-Mahaidi, R. / Sanjayan, J.	Genetic programming in the simulation of Frp-to-concrete patch-anchored joints	305-312
Sarangan, Suganyadevi / Singh, B. N.	Higher-order closed-form solution for the analysis of laminated composite and sandwich plates based on new shear deformation theories	391-403
Freddi, Francesco / Sacco, Elio	An interphase model for the analysis of the masonry-FRP bond	322-334
Junyan, Liu / Fei, Wang / Yang, Liu / Yang, Wang	Inverse methodology for identification the thermal diffusivity and subsurface defect of CFRP composite by lock-in thermographic phase (LITP) profile reconstruction	214-226
Kalantari, Mehdi / Dong, Chensong / Davies, Ian J.	Multi-objective robust optimisation of unidirectional carbon/glass fibre reinforced hybrid composites under flexural loading	264-275
Meng, M. / Rizvi, M. J. / Le, H. R. / Grove, S. M.	Multi-scale modelling of moisture diffusion coupled with stress distribution in CFRP laminated composites	295-304
Biscaia, Hugo C. / Borba, Isabel S. / Silva, Cinderela / Chastre, Carlos	A nonlinear analytical model to predict the full-range debonding process of FRP-to-parent material interfaces free of any mechanical anchorage devices	52-63
Lu, Zi-Xing / Li, Xiang / Yang, Zhen-Yu / Xie, Fan	Novel structure with negative Poisson’s ratio and enhanced Young’s modulus	243-252
Liu, Peng / Cheng, Xiaoquan / Wang, Songwei / Liu, Shufeng / Cheng, Yujia	Numerical analysis of bearing failure in countersunk composite joints using 3D explicit simulation method	30-39
Feito, N. / Díaz-Álvarez, J. / López-Puente, J. / Miguélez, M. H.	Numerical analysis of the influence of tool wear and special cutting geometry when drilling woven CFRPs	285-294
Catalanotti, G.	On the generation of RVE-based models of composites reinforced with long fibres or spherical particles	84-95
Sun, Chaoyang / Huang, Zaixing	Peridynamic simulation to impacting damage in composite laminate	335-341
Bich, Dao Huy / Ninh, Dinh Gia	Post-buckling of sigmoid-functionally graded material toroidal shell segment surrounded by an elastic foundation under thermo-mechanical loads	253-263
Manshadi, Behzad D. / Vassilopoulos, Anastasios P. / Keller, Thomas	Post-wrinkling behavior of webs in GFRP cell-core sandwich structures	276-284
Zhang, L. W. / Liew, K. M.	Postbuckling analysis of axially compressed CNT reinforced functionally graded composite plates resting on Pasternak foundations using an element-free approach	40-51
Jing, Li-long / Ming, Ping-jian / Zhang, Wen-ping / Fu, Li-rong / Cao, Yi-peng	Static and free vibration analysis of functionally graded beams by combination Timoshenko theory and finite volume method	192-213
Brown, Dylan N. / Parks, Joel E. / Ameli, M. J. / Pantelides, Chris P.	Strut-and-tie models of repaired precast concrete bridge substructures with CFRP shell	161-171
Pasternak, Elena / Shufrin, Igor / Dyskin, Arcady V.	Thermal stresses in hybrid materials with auxetic inclusions	313-321
Jafari-Talookolaei, Ramazan-Ali / Abedi, Maryam / Hajianmaleki, Mehdi	Vibration characteristics of generally laminated composite curved beams with single through-the-width delamination	172-183

Informations
sur cette fiche
IssueID
37851
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - mars 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - mars 2016

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.