Composite Structures - September 2016

Published:	September 2016

Articles in this Issue

Author(s)	Title	Page(s)
Shariyat, M. / Asemi, K.	3D energy-based finite element elasticity approach for shear postbuckling analysis of functionally graded plates on elastic foundations	579-591
Ampatzidis, T. / Chronopoulos, D.	Acoustic transmission properties of pressurised and pre-stressed composite structures	900-912
Reda, H. / Rahali, Y. / Ganghoffer, J. F. / Lakiss, H.	Analysis of dispersive waves in repetitive lattices based on homogenized second-gradient continuum models	712-728
Duarte, Isabel / Krstulović-Opara, Lovre / Vesenjak, Matej	Analysis of performance of in-situ carbon steel bar reinforced Al-alloy foams	432-443
Rezaiee-Pajand, Mohammad / Hozhabrossadati, Seyed Mojtaba	Analytical and numerical method for free vibration of double-axially functionally graded beams	488-498
Goulouti, Kyriaki / De Castro, Julia / Keller, Thomas	Aramid/glass fiber-reinforced thermal break – Structural system performance	455-463
Huang, Jian / Zhang, Qiuhua / Scarpa, Fabrizio / Liu, Yanju / Leng, Jinsong	Bending and benchmark of zero Poisson’s ratio cellular structures	729-736
Avgoulas, Evangelos I. / Sutcliffe, Michael P. F.	Biomimetic-inspired CFRP to perforated steel joints	929-938
Napoli, Annalisa / de Felice, Gianmarco / De Santis, Stefano / Realfonzo, Roberto	Bond behaviour of Steel Reinforced Polymer strengthening systems	499-515
Lee, Su-Jin / Kim, Se-Ho / Won, Jong-Pil	Bond-flexural behaviour of structural nano-synthetic fibre-reinforced cementitious composites	20-33
Lei, Z. X. / Zhang, L. W. / Liew, K. M.	Buckling analysis of CNT reinforced functionally graded laminated composite plates	62-73
Chen, Qingyuan / Qiao, Pizhong	Buckling analysis of laminated plate structures with elastic edges using a novel semi-analytical finite strip method	85-95
Emam, Samir / Eltaher, M. A.	Buckling and postbuckling of composite beams in hygrothermal environments	665-675
Bai, Yong / Liu, Ting / Cheng, Peng / Yuan, Shuai / Yao, Dengzun / Tang, Gao	Buckling stability of steel strip reinforced thermoplastic pipe subjected to external pressure	528-537
Yang, Heng / Yao, Xue-Feng / Ke, Yu-Chao / Ma, Yin-ji / Liu, Ying-Hua	Constitutive behaviors and mechanical characterizations of fabric reinforced rubber composites	117-123
Hagnell, M. K. / Langbeck, B. / Åkermo, M.	Cost efficiency, integration and assembly of a generic composite aeronautical wing box	1014-1023
Eskandari, Sina / Andrade Pires, F. M. / Camanho, P. P. / Marques, A. T.	Damage analysis of out of plane undulated fiber composites	464-476
Chen, Hailong / Liu, Yongming	Deformation and failure analyses of cross-ply laminates using a nonlocal discrete model	1007-1013
Zhengchun, Du / Mengrui, Zhu / Zhiguo, Wang / Jianguo, Yang	Design and application of composite platform with extreme low thermal deformation for satellite	693-703
Jeon, Seung-Woo / Cho, Yong Hyeon / Han, Min-Gu / Chang, Seung-Hwan	Design of carbon/epoxy–aluminum hybrid upper arm of the pantograph of high-speed trains using adhesive bonding technique	538-545
Rohem, N. R. F. / Pacheco, L. J. / Budhe, S. / Banea, M. D. / Sampaio, E. M. / de Barros, S.	Development and qualification of a new polymeric matrix laminated composite for pipe repair	737-745
Mastali, M. / Valente, I. B. / Barros, Joaquim A. O.	Development of innovative hybrid sandwich panel slabs: Advanced numerical simulations and parametric studies	362-381
Norris, Thomas G. / Chen, An	Development of insulated FRP-confined Precast Concrete Sandwich panel with side and top confining plates and dry bond	444-454
Li, Nan / Ben Tahar, Mabrouk / Aboura, Zoheir / Khellil, Kamel	A dynamic analysis approach for identifying the elastic properties of unstitched and stitched composite plates	959-968
Li, Huaguan / Hu, Yubing / Fu, Xuelong / Zheng, Xingwei / Liu, Hongbing / Tao, Jie	Effect of adhesive quantity on failure behavior and mechanical properties of fiber metal laminates based on the aluminum–lithium alloy	687-692
Aljabar, N. J. / Zhao, X. L. / Al-Mahaidi, R. / Ghafoori, E. / Motavalli, M. / Powers, N.	Effect of crack orientation on fatigue behavior of CFRP-strengthened steel plates	295-305
Tian, Wenlong / Qi, Lehua / Su, Changqing / Liu, Jian / Zhou, Jiming	Effect of fiber transverse isotropy on effective thermal conductivity of metal matrix composites reinforced by randomly distributed fibers	637-644
Avendaño, R. / Carbas, R. J. C. / Marques, E. A. S. / da Silva, L. F. M. / Fernandes, A. A.	Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive	34-44
Cheour, Khouloud / Assarar, Mustapha / Scida, Daniel / Ayad, Rezak / Gong, Xiao-lu	Effect of water ageing on the mechanical and damping properties of flax-fibre reinforced composite materials	259-266
Savvas, Dimitrios / Stefanou, George / Papadopoulos, Vissarion / Papadrakakis, Manolis	Effect of waviness and orientation of carbon nanotubes on random apparent material properties and RVE size of CNT reinforced composites	870-882
Yang, Lei / Liu, Xin / Wu, Zhanjun / Wang, Rongguo	Effects of triangle-shape fiber on the transverse mechanical properties of unidirectional carbon fiber reinforced plastics	617-625
Wang, Jianfeng / Gao, Haibo / Ding, Liang / Xie, Yajing / Song, Baoyu / Ma, Jiachen / Lin, Mingjin / Sun, Renjie	Enhancement of tensile strength of embedded parts in carbon fiber-reinforced plastic/aluminum honeycomb sandwich structures for vehicle	800-806
Ostré, Benjamin / Bouvet, Christophe / Minot, Clément / Aboissière, Jacky	Experimental analysis of CFRP laminates subjected to compression after edge impact	767-778
Fayala, Ines / Limam, Oualid / Stefanou, Ioannis	Experimental and numerical analysis of reinforced stone block masonry beams using GFRP reinforcement	994-1006
Dlugosch, M. / Lukaszewicz, D. / Fritsch, J. / Hiermaier, S.	Experimental investigation of hybrid material systems consisting of advanced composites and sheet metal	840-849
Moeinifard, Majid / Liaghat, Gholamhossein / Rahimi, Gholamhossein / Talezadehlari, Ali / Hadavinia, Homayoun	Experimental investigation on the energy absorption and contact force of unstiffened and grid-stiffened composite cylindrical shells under lateral compression	626-636
Sun, Guangyong / Li, Shunfeng / Liu, Qiang / Li, Guangyao / Li, Qing	Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes	969-993
Jung, Jeehyun / Seok, Jongwon	Fatigue crack growth analysis in layered heterogeneous material systems using peridynamic approach	403-407
Manalo, Allan / Surendar, Swetha / Van Erp, Gerard / Benmokrane, Brahim	Flexural behavior of an FRP sandwich system with glass-fiber skins and a phenolic core at elevated in-service temperature	96-105
Liu, Weiqing / Zhang, Fubin / Wang, Lu / Qi, Yujun / Zhou, Ding / Su, Bo	Flexural performance of sandwich beams with lattice ribs and a functionally multilayered foam core	704-711
Coelho, Mário / Caggiano, Antonio / Sena-Cruz, José / Neves, Luis	Fracture-based interface model for NSM FRP systems in concrete	816-828
Mantari, J. L. / Canales, F. G.	Free vibration and buckling of laminated beams via hybrid Ritz solution for various penalized boundary conditions	306-315
Reinoso, J. / Blázquez, A.	Geometrically nonlinear analysis of functionally graded power-based and carbon nanotubes reinforced composites using a fully integrated solid shell element	277-294
Chen, Yanyu / Jia, Zian / Wang, Lifeng	Hierarchical honeycomb lattice metamaterials with improved thermal resistance and mechanical properties	395-402
Dai, Ting / Dai, Hong-Liang	Hygrothermal behavior of a CFRR-metal adhesively bonded joint with coupled transfer of heat and moisture through the thickness	947-958
Sikdar, Shirsendu / Banerjee, Sauvik	Identification of disbond and high density core region in a honeycomb composite sandwich structure using ultrasonic guided waves	568-578
Kim, J.-Y. / In, C.-W. / Sun, K. H. / Song, J. S. / Lee, J.-H.	Imaging defects in laminate composite plates using focused shear waves generated by air-coupled transducer	891-899
Hazimeh, Rachad / Othman, Ramzi / Khalil, Khaled / Challita, Georges	Influence of plies’ orientations on the stress distribution in adhesively bonded laminate composite joints subjected to impact loadings	654-664
Ishii, Yosuke / Biwa, Shiro / Kuraishi, Akira	Influence of porosity on ultrasonic wave velocity, attenuation and interlaminar interface echoes in composite laminates: Finite element simulations and measurements	645-653
Hong, Sungnam / Park, Sun-Kyu	Long-term behavior of fiber-reinforced-polymer-plated concrete beams under sustained loading: Analytical and experimental study	140-157
Bienias, Jaroslaw / Jakubczak, Patryk / Dadej, Konrad	Low-velocity impact resistance of aluminium glass laminates – Experimental and numerical investigation	339-348
García-Macías, Enrique / Castro-Triguero, Rafael / Friswell, Michael I. / Adhikari, Sondipon / Sáez, Andrés	Metamodel-based approach for stochastic free vibration analysis of functionally graded carbon nanotube reinforced plates	183-198
Choe, Jaeheon / Kim, Minkook / Kim, Jinwhan / Lee, Dai Gil	A microwave foaming method for fabricating glass fiber reinforced phenolic foam	239-246
Zucco, G. / Groh, R. M. J. / Madeo, A. / Weaver, P. M.	Mixed shell element for static and buckling analysis of variable angle tow composite plates	324-338
He, Bo / Mortazavi, Bohayra / Zhuang, Xiaoying / Rabczuk, Timon	Modeling Kapitza resistance of two-phase composite material	939-946
Meola, C. / Boccardi, S. / Boffa, N. D. / Ricci, F. / Simeoli, G. / Russo, P. / Carlomagno, G. M.	New perspectives on impact damaging of thermoset- and thermoplastic-matrix composites from thermographic images	746-754
Lou, Jia / He, Liwen / Du, Jianke / Wu, Huaping	Nonlinear analyses of functionally graded microplates based on a general four-variable refined plate model and the modified couple stress theory	516-527
Lanc, Domagoj / Turkalj, Goran / Vo, Thuc P. / Brnić, Josip	Nonlinear buckling behaviours of thin-walled functionally graded open section beams	829-839
Lee, Seunghye / Lee, Jaehong	A novel method for topology design of tensegrity structures	11-19
Samborski, Sylwester	Numerical analysis of the DCB test configuration applicability to mechanically coupled Fiber Reinforced Laminated Composite beams	477-487
Ecault, Romain / Touchard, Fabienne / Boustie, Michel / Berthe, Laurent / Dominguez, Nicolas	Numerical modeling of laser-induced shock experiments for the development of the adhesion test for bonded composite materials	382-394
Truong, Ba Tam / Si Larbi, Amir / Limam, Ali	Numerical modelling of reinforced concrete beams repaired by TRC composites	779-790
Tian, Wenlong / Qi, Lehua / Su, Changqing / Zhou, Jiming / Jing, Zhao	' Numerical simulation on elastic properties of short-fiber-reinforced metal matrix composites: Effect of fiber orientation	408-417
Wang, Bo / Tian, Kuo / Hao, Peng / Zheng, Yanbing / Ma, Yunlong / Wang, Jiebing	Numerical-based smeared stiffener method for global buckling analysis of grid-stiffened composite cylindrical shells	807-815
Rauter, Natalie / Lammering, Rolf / Kühnrich, Tim	On the detection of fatigue damage in composites by use of second harmonic guided waves	247-258
An, Haichao / Chen, Shenyan / Huang, Hai	Optimal design of composite sandwich structures by considering multiple structure cases	676-686
Lee, Su-Jin / Eom, A-Hyeon / Ryu, Su-Ji / Won, Jong-Pil	Optimal dimension of arch-type steel fibre-reinforced cementitious composite for shotcrete	600-606
Irisarri, François-Xavier / Peeters, Daniël M. J. / Abdalla, Mostafa M.	Optimisation of ply drop order in variable stiffness laminates	791-799
Zou, Xingxing / Feng, Peng / Wang, Jingquan	Perforated FRP ribs for shear connecting of FRP-concrete hybrid beams/decks	267-276
Zhang, L. W. / Liew, K. M. / Reddy, J. N.	' Postbuckling analysis of bi-axially compressed laminated nanocomposite plates using the first-order shear deformation theory	418-431
Du, Ao / Liu, Yuqing / Xin, Haohui / Zuo, Yize	Progressive damage analysis of PFRP double-lap bolted joints using explicit finite element method	860-869
Zhong, Suyang / Guo, Licheng / Liu, Gang / Zhang, Li / Pan, Shidong	A random waveness model for the stiffness and strength evaluation of 3D woven composites	1024-1032
Wu, Zhen / Xu, Qi / Lu, Shaowei / Ren, Xiaohui	A refined five-unknown higher-order model including transverse normal hygrothermal deformation	546-557
Andrew, J. Jefferson / Arumugam, V. / Bull, D. J. / Dhakal, H. N.	Residual strength and damage characterization of repaired glass/epoxy composite laminates using A.E. and D.I.C	124-139
Nash, N. H. / Young, T. M. / Stanley, W. F.	The reversibility of Mode-I and -II interlaminar fracture toughness after hydrothermal aging of Carbon/Benzoxazine composites with a thermoplastic toughening interlayer	558-567
Dai, Hong-Liang / Rao, Yan-Ni / Dai, Ting	A review of recent researches on FGM cylindrical structures under coupled physical interactions, 2000–2015	199-225
De Sutter, S. / Verbruggen, S. / Tysmans, T.	Shear behaviour of hybrid composite-concrete beams: Experimental failure and strain analysis	607-616
De Sutter, S. / Verbruggen, S. / Tysmans, T.	Shear capacity of hybrid composite-concrete beams: A theoretical approach	592-599
Mehralian, Fahimeh / Beni, Yaghoub Tadi / Ansari, Reza	Size dependent buckling analysis of functionally graded piezoelectric cylindrical nanoshell	45-61
Chudoba, R. / Sharei, E. / Scholzen, A.	A strain-hardening microplane damage model for thin-walled textile-reinforced concrete shells, calibration procedure, and experimental validation	913-928
Barnes, R. H. / Morozov, E. V.	Structural optimisation of composite wind turbine blade structures with variations of internal geometry configuration	158-167
Fukui, Hayato / Yoshimura, Akinori / Matsuzaki, Ryosuke	Structural optimization for CFRP cryogenic tank based on energy release rate	883-890
Ridzuan, M. J. M. / Abdul Majid, M. S. / Afendi, M. / Mazlee, M. N. / Gibson, A. G.	Thermal behaviour and dynamic mechanical analysis of Pennisetum purpureum /glass-reinforced epoxy hybrid composites	850-859
Müller, Bernhard / Hagenbeek, Michiel / Sinke, Jos	Thermal cycling of (heated) fibre metal laminates	106-116
Vidal, P. / Gallimard, L. / Polit, O.	Thermo-mechanical analysis of laminated composite and sandwich beams based on a variables separation	755-766
Sofiyev, A. H.	Thermoelastic stability of freely supported functionally graded conical shells within the shear deformation theory	74-84
Kulikov, G. M. / Plotnikova, S. V. / Kulikov, M. G. / Monastyrev, P. V.	Three-dimensional vibration analysis of layered and functionally graded plates through sampling surfaces formulation	349-361
Shao, Dong / Hu, Fengyuan / Wang, Qingshan / Pang, Fuzhen / Hu, Shenghai	Transient response analysis of cross-ply composite laminated rectangular plates with general boundary restraints by the method of reverberation ray matrix	168-182
Dong, Jiwei / Huo, Ningfei	A two-scale method for predicting the mechanical properties of 3D braided composites with internal defects	1-10
Druesne, Frédéric / Hamdaoui, Mohamed / Lardeur, Pascal / Daya, El Mostafa	Variability of dynamic responses of frequency dependent visco-elastic sandwich beams with material and physical properties modeled by spatial random fields	316-323
Jaiani, George	Vekua type hierarchical models for prismatic shells with mixed conditions on face surfaces	226-238

About this
data sheet
IssueID
37836
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - September 2016

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - September 2016

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.