Composite Structures - September 2016

Erschienen:	September 2016

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Shariyat, M. / Asemi, K.	3D energy-based finite element elasticity approach for shear postbuckling analysis of functionally graded plates on elastic foundations	579-591
Ampatzidis, T. / Chronopoulos, D.	Acoustic transmission properties of pressurised and pre-stressed composite structures	900-912
Reda, H. / Rahali, Y. / Ganghoffer, J. F. / Lakiss, H.	Analysis of dispersive waves in repetitive lattices based on homogenized second-gradient continuum models	712-728
Duarte, Isabel / Krstulović-Opara, Lovre / Vesenjak, Matej	Analysis of performance of in-situ carbon steel bar reinforced Al-alloy foams	432-443
Rezaiee-Pajand, Mohammad / Hozhabrossadati, Seyed Mojtaba	Analytical and numerical method for free vibration of double-axially functionally graded beams	488-498
Goulouti, Kyriaki / De Castro, Julia / Keller, Thomas	Aramid/glass fiber-reinforced thermal break – Structural system performance	455-463
Huang, Jian / Zhang, Qiuhua / Scarpa, Fabrizio / Liu, Yanju / Leng, Jinsong	Bending and benchmark of zero Poisson’s ratio cellular structures	729-736
Avgoulas, Evangelos I. / Sutcliffe, Michael P. F.	Biomimetic-inspired CFRP to perforated steel joints	929-938
Napoli, Annalisa / de Felice, Gianmarco / De Santis, Stefano / Realfonzo, Roberto	Bond behaviour of Steel Reinforced Polymer strengthening systems	499-515
Lee, Su-Jin / Kim, Se-Ho / Won, Jong-Pil	Bond-flexural behaviour of structural nano-synthetic fibre-reinforced cementitious composites	20-33
Lei, Z. X. / Zhang, L. W. / Liew, K. M.	Buckling analysis of CNT reinforced functionally graded laminated composite plates	62-73
Chen, Qingyuan / Qiao, Pizhong	Buckling analysis of laminated plate structures with elastic edges using a novel semi-analytical finite strip method	85-95
Emam, Samir / Eltaher, M. A.	Buckling and postbuckling of composite beams in hygrothermal environments	665-675
Bai, Yong / Liu, Ting / Cheng, Peng / Yuan, Shuai / Yao, Dengzun / Tang, Gao	Buckling stability of steel strip reinforced thermoplastic pipe subjected to external pressure	528-537
Yang, Heng / Yao, Xue-Feng / Ke, Yu-Chao / Ma, Yin-ji / Liu, Ying-Hua	Constitutive behaviors and mechanical characterizations of fabric reinforced rubber composites	117-123
Hagnell, M. K. / Langbeck, B. / Åkermo, M.	Cost efficiency, integration and assembly of a generic composite aeronautical wing box	1014-1023
Eskandari, Sina / Andrade Pires, F. M. / Camanho, P. P. / Marques, A. T.	Damage analysis of out of plane undulated fiber composites	464-476
Chen, Hailong / Liu, Yongming	Deformation and failure analyses of cross-ply laminates using a nonlocal discrete model	1007-1013
Zhengchun, Du / Mengrui, Zhu / Zhiguo, Wang / Jianguo, Yang	Design and application of composite platform with extreme low thermal deformation for satellite	693-703
Jeon, Seung-Woo / Cho, Yong Hyeon / Han, Min-Gu / Chang, Seung-Hwan	Design of carbon/epoxy–aluminum hybrid upper arm of the pantograph of high-speed trains using adhesive bonding technique	538-545
Rohem, N. R. F. / Pacheco, L. J. / Budhe, S. / Banea, M. D. / Sampaio, E. M. / de Barros, S.	Development and qualification of a new polymeric matrix laminated composite for pipe repair	737-745
Mastali, M. / Valente, I. B. / Barros, Joaquim A. O.	Development of innovative hybrid sandwich panel slabs: Advanced numerical simulations and parametric studies	362-381
Norris, Thomas G. / Chen, An	Development of insulated FRP-confined Precast Concrete Sandwich panel with side and top confining plates and dry bond	444-454
Li, Nan / Ben Tahar, Mabrouk / Aboura, Zoheir / Khellil, Kamel	A dynamic analysis approach for identifying the elastic properties of unstitched and stitched composite plates	959-968
Li, Huaguan / Hu, Yubing / Fu, Xuelong / Zheng, Xingwei / Liu, Hongbing / Tao, Jie	Effect of adhesive quantity on failure behavior and mechanical properties of fiber metal laminates based on the aluminum–lithium alloy	687-692
Aljabar, N. J. / Zhao, X. L. / Al-Mahaidi, R. / Ghafoori, E. / Motavalli, M. / Powers, N.	Effect of crack orientation on fatigue behavior of CFRP-strengthened steel plates	295-305
Tian, Wenlong / Qi, Lehua / Su, Changqing / Liu, Jian / Zhou, Jiming	Effect of fiber transverse isotropy on effective thermal conductivity of metal matrix composites reinforced by randomly distributed fibers	637-644
Avendaño, R. / Carbas, R. J. C. / Marques, E. A. S. / da Silva, L. F. M. / Fernandes, A. A.	Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive	34-44
Cheour, Khouloud / Assarar, Mustapha / Scida, Daniel / Ayad, Rezak / Gong, Xiao-lu	Effect of water ageing on the mechanical and damping properties of flax-fibre reinforced composite materials	259-266
Savvas, Dimitrios / Stefanou, George / Papadopoulos, Vissarion / Papadrakakis, Manolis	Effect of waviness and orientation of carbon nanotubes on random apparent material properties and RVE size of CNT reinforced composites	870-882
Yang, Lei / Liu, Xin / Wu, Zhanjun / Wang, Rongguo	Effects of triangle-shape fiber on the transverse mechanical properties of unidirectional carbon fiber reinforced plastics	617-625
Wang, Jianfeng / Gao, Haibo / Ding, Liang / Xie, Yajing / Song, Baoyu / Ma, Jiachen / Lin, Mingjin / Sun, Renjie	Enhancement of tensile strength of embedded parts in carbon fiber-reinforced plastic/aluminum honeycomb sandwich structures for vehicle	800-806
Ostré, Benjamin / Bouvet, Christophe / Minot, Clément / Aboissière, Jacky	Experimental analysis of CFRP laminates subjected to compression after edge impact	767-778
Fayala, Ines / Limam, Oualid / Stefanou, Ioannis	Experimental and numerical analysis of reinforced stone block masonry beams using GFRP reinforcement	994-1006
Dlugosch, M. / Lukaszewicz, D. / Fritsch, J. / Hiermaier, S.	Experimental investigation of hybrid material systems consisting of advanced composites and sheet metal	840-849
Moeinifard, Majid / Liaghat, Gholamhossein / Rahimi, Gholamhossein / Talezadehlari, Ali / Hadavinia, Homayoun	Experimental investigation on the energy absorption and contact force of unstiffened and grid-stiffened composite cylindrical shells under lateral compression	626-636
Sun, Guangyong / Li, Shunfeng / Liu, Qiang / Li, Guangyao / Li, Qing	Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes	969-993
Jung, Jeehyun / Seok, Jongwon	Fatigue crack growth analysis in layered heterogeneous material systems using peridynamic approach	403-407
Manalo, Allan / Surendar, Swetha / Van Erp, Gerard / Benmokrane, Brahim	Flexural behavior of an FRP sandwich system with glass-fiber skins and a phenolic core at elevated in-service temperature	96-105
Liu, Weiqing / Zhang, Fubin / Wang, Lu / Qi, Yujun / Zhou, Ding / Su, Bo	Flexural performance of sandwich beams with lattice ribs and a functionally multilayered foam core	704-711
Coelho, Mário / Caggiano, Antonio / Sena-Cruz, José / Neves, Luis	Fracture-based interface model for NSM FRP systems in concrete	816-828
Mantari, J. L. / Canales, F. G.	Free vibration and buckling of laminated beams via hybrid Ritz solution for various penalized boundary conditions	306-315
Reinoso, J. / Blázquez, A.	Geometrically nonlinear analysis of functionally graded power-based and carbon nanotubes reinforced composites using a fully integrated solid shell element	277-294
Chen, Yanyu / Jia, Zian / Wang, Lifeng	Hierarchical honeycomb lattice metamaterials with improved thermal resistance and mechanical properties	395-402
Dai, Ting / Dai, Hong-Liang	Hygrothermal behavior of a CFRR-metal adhesively bonded joint with coupled transfer of heat and moisture through the thickness	947-958
Sikdar, Shirsendu / Banerjee, Sauvik	Identification of disbond and high density core region in a honeycomb composite sandwich structure using ultrasonic guided waves	568-578
Kim, J.-Y. / In, C.-W. / Sun, K. H. / Song, J. S. / Lee, J.-H.	Imaging defects in laminate composite plates using focused shear waves generated by air-coupled transducer	891-899
Hazimeh, Rachad / Othman, Ramzi / Khalil, Khaled / Challita, Georges	Influence of plies’ orientations on the stress distribution in adhesively bonded laminate composite joints subjected to impact loadings	654-664
Ishii, Yosuke / Biwa, Shiro / Kuraishi, Akira	Influence of porosity on ultrasonic wave velocity, attenuation and interlaminar interface echoes in composite laminates: Finite element simulations and measurements	645-653
Hong, Sungnam / Park, Sun-Kyu	Long-term behavior of fiber-reinforced-polymer-plated concrete beams under sustained loading: Analytical and experimental study	140-157
Bienias, Jaroslaw / Jakubczak, Patryk / Dadej, Konrad	Low-velocity impact resistance of aluminium glass laminates – Experimental and numerical investigation	339-348
García-Macías, Enrique / Castro-Triguero, Rafael / Friswell, Michael I. / Adhikari, Sondipon / Sáez, Andrés	Metamodel-based approach for stochastic free vibration analysis of functionally graded carbon nanotube reinforced plates	183-198
Choe, Jaeheon / Kim, Minkook / Kim, Jinwhan / Lee, Dai Gil	A microwave foaming method for fabricating glass fiber reinforced phenolic foam	239-246
Zucco, G. / Groh, R. M. J. / Madeo, A. / Weaver, P. M.	Mixed shell element for static and buckling analysis of variable angle tow composite plates	324-338
He, Bo / Mortazavi, Bohayra / Zhuang, Xiaoying / Rabczuk, Timon	Modeling Kapitza resistance of two-phase composite material	939-946
Meola, C. / Boccardi, S. / Boffa, N. D. / Ricci, F. / Simeoli, G. / Russo, P. / Carlomagno, G. M.	New perspectives on impact damaging of thermoset- and thermoplastic-matrix composites from thermographic images	746-754
Lou, Jia / He, Liwen / Du, Jianke / Wu, Huaping	Nonlinear analyses of functionally graded microplates based on a general four-variable refined plate model and the modified couple stress theory	516-527
Lanc, Domagoj / Turkalj, Goran / Vo, Thuc P. / Brnić, Josip	Nonlinear buckling behaviours of thin-walled functionally graded open section beams	829-839
Lee, Seunghye / Lee, Jaehong	A novel method for topology design of tensegrity structures	11-19
Samborski, Sylwester	Numerical analysis of the DCB test configuration applicability to mechanically coupled Fiber Reinforced Laminated Composite beams	477-487
Ecault, Romain / Touchard, Fabienne / Boustie, Michel / Berthe, Laurent / Dominguez, Nicolas	Numerical modeling of laser-induced shock experiments for the development of the adhesion test for bonded composite materials	382-394
Truong, Ba Tam / Si Larbi, Amir / Limam, Ali	Numerical modelling of reinforced concrete beams repaired by TRC composites	779-790
Tian, Wenlong / Qi, Lehua / Su, Changqing / Zhou, Jiming / Jing, Zhao	' Numerical simulation on elastic properties of short-fiber-reinforced metal matrix composites: Effect of fiber orientation	408-417
Wang, Bo / Tian, Kuo / Hao, Peng / Zheng, Yanbing / Ma, Yunlong / Wang, Jiebing	Numerical-based smeared stiffener method for global buckling analysis of grid-stiffened composite cylindrical shells	807-815
Rauter, Natalie / Lammering, Rolf / Kühnrich, Tim	On the detection of fatigue damage in composites by use of second harmonic guided waves	247-258
An, Haichao / Chen, Shenyan / Huang, Hai	Optimal design of composite sandwich structures by considering multiple structure cases	676-686
Lee, Su-Jin / Eom, A-Hyeon / Ryu, Su-Ji / Won, Jong-Pil	Optimal dimension of arch-type steel fibre-reinforced cementitious composite for shotcrete	600-606
Irisarri, François-Xavier / Peeters, Daniël M. J. / Abdalla, Mostafa M.	Optimisation of ply drop order in variable stiffness laminates	791-799
Zou, Xingxing / Feng, Peng / Wang, Jingquan	Perforated FRP ribs for shear connecting of FRP-concrete hybrid beams/decks	267-276
Zhang, L. W. / Liew, K. M. / Reddy, J. N.	' Postbuckling analysis of bi-axially compressed laminated nanocomposite plates using the first-order shear deformation theory	418-431
Du, Ao / Liu, Yuqing / Xin, Haohui / Zuo, Yize	Progressive damage analysis of PFRP double-lap bolted joints using explicit finite element method	860-869
Zhong, Suyang / Guo, Licheng / Liu, Gang / Zhang, Li / Pan, Shidong	A random waveness model for the stiffness and strength evaluation of 3D woven composites	1024-1032
Wu, Zhen / Xu, Qi / Lu, Shaowei / Ren, Xiaohui	A refined five-unknown higher-order model including transverse normal hygrothermal deformation	546-557
Andrew, J. Jefferson / Arumugam, V. / Bull, D. J. / Dhakal, H. N.	Residual strength and damage characterization of repaired glass/epoxy composite laminates using A.E. and D.I.C	124-139
Nash, N. H. / Young, T. M. / Stanley, W. F.	The reversibility of Mode-I and -II interlaminar fracture toughness after hydrothermal aging of Carbon/Benzoxazine composites with a thermoplastic toughening interlayer	558-567
Dai, Hong-Liang / Rao, Yan-Ni / Dai, Ting	A review of recent researches on FGM cylindrical structures under coupled physical interactions, 2000–2015	199-225
De Sutter, S. / Verbruggen, S. / Tysmans, T.	Shear behaviour of hybrid composite-concrete beams: Experimental failure and strain analysis	607-616
De Sutter, S. / Verbruggen, S. / Tysmans, T.	Shear capacity of hybrid composite-concrete beams: A theoretical approach	592-599
Mehralian, Fahimeh / Beni, Yaghoub Tadi / Ansari, Reza	Size dependent buckling analysis of functionally graded piezoelectric cylindrical nanoshell	45-61
Chudoba, R. / Sharei, E. / Scholzen, A.	A strain-hardening microplane damage model for thin-walled textile-reinforced concrete shells, calibration procedure, and experimental validation	913-928
Barnes, R. H. / Morozov, E. V.	Structural optimisation of composite wind turbine blade structures with variations of internal geometry configuration	158-167
Fukui, Hayato / Yoshimura, Akinori / Matsuzaki, Ryosuke	Structural optimization for CFRP cryogenic tank based on energy release rate	883-890
Ridzuan, M. J. M. / Abdul Majid, M. S. / Afendi, M. / Mazlee, M. N. / Gibson, A. G.	Thermal behaviour and dynamic mechanical analysis of Pennisetum purpureum /glass-reinforced epoxy hybrid composites	850-859
Müller, Bernhard / Hagenbeek, Michiel / Sinke, Jos	Thermal cycling of (heated) fibre metal laminates	106-116
Vidal, P. / Gallimard, L. / Polit, O.	Thermo-mechanical analysis of laminated composite and sandwich beams based on a variables separation	755-766
Sofiyev, A. H.	Thermoelastic stability of freely supported functionally graded conical shells within the shear deformation theory	74-84
Kulikov, G. M. / Plotnikova, S. V. / Kulikov, M. G. / Monastyrev, P. V.	Three-dimensional vibration analysis of layered and functionally graded plates through sampling surfaces formulation	349-361
Shao, Dong / Hu, Fengyuan / Wang, Qingshan / Pang, Fuzhen / Hu, Shenghai	Transient response analysis of cross-ply composite laminated rectangular plates with general boundary restraints by the method of reverberation ray matrix	168-182
Dong, Jiwei / Huo, Ningfei	A two-scale method for predicting the mechanical properties of 3D braided composites with internal defects	1-10
Druesne, Frédéric / Hamdaoui, Mohamed / Lardeur, Pascal / Daya, El Mostafa	Variability of dynamic responses of frequency dependent visco-elastic sandwich beams with material and physical properties modeled by spatial random fields	316-323
Jaiani, George	Vekua type hierarchical models for prismatic shells with mixed conditions on face surfaces	226-238

Über diese
Datenseite
IssueID
37836
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - September 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - September 2016

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.