Composite Structures - November 2017

Published:	November 2017

Articles in this Issue

Author(s)	Title	Page(s)
Chai, Yu-Yang / Song, Zhi-Guang / Li, Feng-Ming	Active aerothermoelastic flutter suppression of composite laminated panels with time-dependent boundaries	61-76
Langston, Tye	An analytical model for the ballistic performance of ultra-high molecular weight polyethylene composites	245-257
Xie, Jiawen / Waas, Anthony M. / Rassaian, Mostafa	Analytical predictions of delamination threshold load of laminated composite plates subject to flexural loading	181-194
Zhang, Yingying / Xu, Shanshan / Xue, Jigang / Zhang, Qilin	Anisotropic mechanical properties and constitutive relations of PTFE coated glass fibers	601-616
Andrianov, Igor V. / Awrejcewicz, Jan / Starushenko, Galina A.	Asymptotic models and transport properties of densely packed, high-contrast fibre composites. Part I: Square lattice of circular inclusions	617-627
Tuna, Meral / Kirca, Mesut	Bending, buckling and free vibration analysis of Euler-Bernoulli nanobeams using Eringen’s nonlocal integral model via finite element method	269-284
Jakubczak, Patryk / Gliszczynski, Adrian / Bieniaś, Jarosław / Majerski, Krzysztof / Kubiak, Tomasz	Collapse of channel section composite profile subjected to bending Part II: Failure analysis	1-20
Kong, Kanhchana / Mesticou, Zyed / Michel, Marie / Si Larbi, Amir / Junes, Angel	Comparative characterization of the durability behaviour of textile-reinforced concrete (TRC) under tension and bending	107-123
Ghayesh, Mergen H. / Farokhi, Hamed / Gholipour, Alireza / Tavallaeinejad, Mohammad	Dynamic characterisation of functionally graded imperfect Kirchhoff microplates	720-731
Arteiro, A. / Catalanotti, G. / Xavier, J. / Linde, P. / Camanho, P. P.	Effect of tow thickness on the structural response of aerospace-grade spread-tow fabrics	208-223
Kefal, Adnan / Tessler, Alexander / Oterkus, Erkan	An enhanced inverse finite element method for displacement and stress monitoring of multilayered composite and sandwich structures	514-540
Bhudolia, Somen K. / Perrotey, Pavel / Joshi, Sunil C.	Enhanced vibration damping and dynamic mechanical characteristics of composites with novel pseudo-thermoset matrix system	502-513
Abrate, Serge / Di Sciuva, Marco	Equivalent single layer theories for composite and sandwich structures: A review	482-494
Shi, Shuanhu / Li, Peng / Jin, Feng	The establishment of coupled magneto-electro-thermo-elastic theory with the consideration of surface and non-local effects and its application in laminated nano-devices	541-551
Metelli, G. / Marchina, E. / Plizzari, G. A.	Experimental study on staggered lapped bars in fiber reinforced concrete beams	655-664
Alabdulhady, Meyyada Y. / Sneed, Lesley H. / Abdelkarim, Omar I. / ElGawady, Mohamed A.	Finite element study on the behavior of RC beams strengthened with PBO-FRCM composite under torsion	326-339
Hajiloo, Hamzeh / Green, Mark F. / Noël, Martin / Bénichou, Noureddine / Sultan, Mohamed	Fire tests on full-scale FRP reinforced concrete slabs	705-719
Das, Debabrata	Free vibration and buckling analyses of geometrically non-linear and shear-deformable FGM beam fixed to the inside of a rotating rim	628-645
Chen, Hongyan / Wang, Aiwen / Hao, Yuxin / Zhang, Wei	Free vibration of FGM sandwich doubly-curved shallow shell based on a new shear deformation theory with stretching effects	50-60
Montuori, Rosario / Skelton, Robert E.	Globally stable tensegrity compressive structures for arbitrary complexity	682-694
Yazdani Sarvestani, H. / Akbarzadeh, A. H. / Hojjati, M.	Hygro-thermo-mechanical analysis of fiber-steered composite conical panels	146-160
Missoum, Samy / Lacaze, Sylvain / Amabili, Marco / Alijani, Farbod	Identification of material properties of composite sandwich panels under geometric uncertainty	695-704
Kuo, Chunliang / Wang, Chihying / Liu, Mengkun	Interpretation of force signals into mechanical effects in vibration-assisted drilling of carbon fibre reinforced plastic (CFRP)/aluminium stack materials	444-458
Tran, Loc V. / Abdel Wahab, M. / Kim, Seung-Eock	An isogeometric finite element approach for thermal bending and buckling analyses of laminated composite plates	35-49
Mao, Lingtao / Chiang, Fu-Pen	Mapping interior deformation of a composite sandwich beam using Digital Volumetric Speckle Photography with X-ray computed tomography	172-180
Tornabene, Francesco / Fantuzzi, Nicholas / Bacciocchi, Michele	Mechanical behaviour of composite Cosserat solids in elastic problems with holes and discontinuities	468-481
Zhang, Zhiwei / Xiang, Hongjun / Shi, Zhifei	Mechanism exploration of piezoelectric energy harvesting from vibration in beams subjected to moving harmonic loads	368-376
Dionisi, Filippo / Harnden, Ross / Zenkert, Dan	A model to analyse deformations and stresses in structural batteries due to electrode expansions	580-589
Lieu, Qui X. / Lee, Jaehong	Modeling and optimization of functionally graded plates under thermo-mechanical load using isogeometric analysis and adaptive hybrid evolutionary firefly algorithm	89-106
An, Xiaomin / Khoo, Boo Cheng / Cui, Yongdong	Nonlinear aeroelastic analysis of curved laminated composite panels	377-414
Youzera, Hadj / Meftah, Sid Ahmed	Nonlinear damping and forced vibration behaviour of sandwich beams with transverse normal stress	258-268
Sahmani, S. / Aghdam, M. M.	Nonlocal strain gradient beam model for nonlinear vibration of prebuckled and postbuckled multilayer functionally graded GPLRC nanobeams	77-88
Fattahi, Iman / Mirdamadi, Hamid Reza	Novel composite finite element model for piezoelectric energy harvesters based on 3D beam kinematics	161-171
Duarte, A. P. C. / Silvestre, N. / de Brito, J. / Júlio, E.	Numerical study of the compressive mechanical behaviour of rubberized concrete using the eXtended Finite Element Method (XFEM)	132-145
Askari, M. / Saidi, A. R. / Rezaei, A. S.	On natural frequencies of Levy-type thick porous-cellular plates surrounded by piezoelectric layers	340-354
Salvetti, M. / Sbarufatti, C. / Gilioli, A. / Dziendzikowski, M. / Dragan, K. / Manes, A. / Giglio, M.	On the mechanical response of CFRP composite with embedded optical fibre when subjected to low velocity impact and CAI tests	21-34
Patel, Nirav P. / Sharma, Dharmendra S.	On the stress concentration around a polygonal cut-out of complex geometry in an infinite orthotropic plate	415-436
Nguyen, Tan-Tien / Lee, Jaehong	Optimal design of thin-walled functionally graded beams for buckling problems	459-467
Jelušič, Primož / Kravanja, Stojan	Optimal design of timber-concrete composite floors based on the multi-parametric MINLP optimization	285-293
Liu, Yang / Straumit, Ilya / Vasiukov, Dmytro / Lomov, Stepan V. / Panier, Stéphane	Prediction of linear and non-linear behavior of 3D woven composite using mesoscopic voxel models reconstructed from X-ray micro-tomography	568-579
Lee, Su-Jin / Won, Jong-Pil	Resistibility of structural nano-synthetic fibre-reinforced cementitious composites in various chemical and physical environments	495-501
Soltanieh, Ghazaleh / Kabir, Mohammad Z. / Shariyat, Mohammad	A robust algorithm for behavior and effectiveness investigations of super-elastic SMA wires embedded in composite plates under impulse loading	355-367
Rahmani, Behrooz / Shenas, Amin Ghorbani	Robust vibration control of laminated rectangular composite plates in hygrothermal and thermal environment	665-681
Huang, Jian / Zhang, Qiuhua / Scarpa, Fabrizio / Liu, Yanju / Leng, Jinsong	Shape memory polymer-based hybrid honeycomb structures with zero Poisson’s ratio and variable stiffness	437-443
Zeighampour, Hamid / Beni, Yaghoub Tadi	Size dependent analysis of wave propagation in functionally graded composite cylindrical microshell reinforced by carbon nanotube	124-131
Deng, Jiaquan / Liu, Yongshou / Zhang, Zijun / Liu, Wei	Size-dependent vibration and stability of multi-span viscoelastic functionally graded material nanopipes conveying fluid using a hybrid method	590-600
Yang, Wanli / He, Dan / Chen, Wanji	A size-dependent zigzag model for composite laminated micro beams based on a modified couple stress theory	646-654
Sneed, L. H. / Ravazdezh, F. / Santandrea, M. / Imohamed, I. A. O. / Carloni, C.	A study of the compressive behavior of concrete columns confined with SRP jackets using digital image analysis	195-207
Magnucki, K. / Malinowski, M. / Magnucka-Blandzi, E. / Lewiński, J.	Three-point bending of a short beam with symmetrically varying mechanical properties	552-557
Bansal, Manik / Singh, I. V. / Mishra, B. K. / Sharma, Kamal / Khan, I. A.	A two-scale stochastic framework for predicting failure strength probability of heterogeneous materials	294-325
Kashani, M. Haghi / Hosseini, A. / Sassani, F. / Ko, F. K. / Milani, A. S.	Understanding different types of coupling in mechanical behavior of woven fabric reinforcements: A critical review and analysis	558-567
Serra, Joël / Pierré, J. E. / Passieux, J. C. / Périé, J. N. / Bouvet, Christophe / Castanié, Bruno	Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 1: Experimental setup, FE-DIC instrumentation and procedures	224-244

About this
data sheet
IssueID
37808
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - November 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - November 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.