Composite Structures - novembre 2017

Publié:	novembre 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Chai, Yu-Yang / Song, Zhi-Guang / Li, Feng-Ming	Active aerothermoelastic flutter suppression of composite laminated panels with time-dependent boundaries	61-76
Langston, Tye	An analytical model for the ballistic performance of ultra-high molecular weight polyethylene composites	245-257
Xie, Jiawen / Waas, Anthony M. / Rassaian, Mostafa	Analytical predictions of delamination threshold load of laminated composite plates subject to flexural loading	181-194
Zhang, Yingying / Xu, Shanshan / Xue, Jigang / Zhang, Qilin	Anisotropic mechanical properties and constitutive relations of PTFE coated glass fibers	601-616
Andrianov, Igor V. / Awrejcewicz, Jan / Starushenko, Galina A.	Asymptotic models and transport properties of densely packed, high-contrast fibre composites. Part I: Square lattice of circular inclusions	617-627
Tuna, Meral / Kirca, Mesut	Bending, buckling and free vibration analysis of Euler-Bernoulli nanobeams using Eringen’s nonlocal integral model via finite element method	269-284
Jakubczak, Patryk / Gliszczynski, Adrian / Bieniaś, Jarosław / Majerski, Krzysztof / Kubiak, Tomasz	Collapse of channel section composite profile subjected to bending Part II: Failure analysis	1-20
Kong, Kanhchana / Mesticou, Zyed / Michel, Marie / Si Larbi, Amir / Junes, Angel	Comparative characterization of the durability behaviour of textile-reinforced concrete (TRC) under tension and bending	107-123
Ghayesh, Mergen H. / Farokhi, Hamed / Gholipour, Alireza / Tavallaeinejad, Mohammad	Dynamic characterisation of functionally graded imperfect Kirchhoff microplates	720-731
Arteiro, A. / Catalanotti, G. / Xavier, J. / Linde, P. / Camanho, P. P.	Effect of tow thickness on the structural response of aerospace-grade spread-tow fabrics	208-223
Kefal, Adnan / Tessler, Alexander / Oterkus, Erkan	An enhanced inverse finite element method for displacement and stress monitoring of multilayered composite and sandwich structures	514-540
Bhudolia, Somen K. / Perrotey, Pavel / Joshi, Sunil C.	Enhanced vibration damping and dynamic mechanical characteristics of composites with novel pseudo-thermoset matrix system	502-513
Abrate, Serge / Di Sciuva, Marco	Equivalent single layer theories for composite and sandwich structures: A review	482-494
Shi, Shuanhu / Li, Peng / Jin, Feng	The establishment of coupled magneto-electro-thermo-elastic theory with the consideration of surface and non-local effects and its application in laminated nano-devices	541-551
Metelli, G. / Marchina, E. / Plizzari, G. A.	Experimental study on staggered lapped bars in fiber reinforced concrete beams	655-664
Alabdulhady, Meyyada Y. / Sneed, Lesley H. / Abdelkarim, Omar I. / ElGawady, Mohamed A.	Finite element study on the behavior of RC beams strengthened with PBO-FRCM composite under torsion	326-339
Hajiloo, Hamzeh / Green, Mark F. / Noël, Martin / Bénichou, Noureddine / Sultan, Mohamed	Fire tests on full-scale FRP reinforced concrete slabs	705-719
Das, Debabrata	Free vibration and buckling analyses of geometrically non-linear and shear-deformable FGM beam fixed to the inside of a rotating rim	628-645
Chen, Hongyan / Wang, Aiwen / Hao, Yuxin / Zhang, Wei	Free vibration of FGM sandwich doubly-curved shallow shell based on a new shear deformation theory with stretching effects	50-60
Montuori, Rosario / Skelton, Robert E.	Globally stable tensegrity compressive structures for arbitrary complexity	682-694
Yazdani Sarvestani, H. / Akbarzadeh, A. H. / Hojjati, M.	Hygro-thermo-mechanical analysis of fiber-steered composite conical panels	146-160
Missoum, Samy / Lacaze, Sylvain / Amabili, Marco / Alijani, Farbod	Identification of material properties of composite sandwich panels under geometric uncertainty	695-704
Kuo, Chunliang / Wang, Chihying / Liu, Mengkun	Interpretation of force signals into mechanical effects in vibration-assisted drilling of carbon fibre reinforced plastic (CFRP)/aluminium stack materials	444-458
Tran, Loc V. / Abdel Wahab, M. / Kim, Seung-Eock	An isogeometric finite element approach for thermal bending and buckling analyses of laminated composite plates	35-49
Mao, Lingtao / Chiang, Fu-Pen	Mapping interior deformation of a composite sandwich beam using Digital Volumetric Speckle Photography with X-ray computed tomography	172-180
Tornabene, Francesco / Fantuzzi, Nicholas / Bacciocchi, Michele	Mechanical behaviour of composite Cosserat solids in elastic problems with holes and discontinuities	468-481
Zhang, Zhiwei / Xiang, Hongjun / Shi, Zhifei	Mechanism exploration of piezoelectric energy harvesting from vibration in beams subjected to moving harmonic loads	368-376
Dionisi, Filippo / Harnden, Ross / Zenkert, Dan	A model to analyse deformations and stresses in structural batteries due to electrode expansions	580-589
Lieu, Qui X. / Lee, Jaehong	Modeling and optimization of functionally graded plates under thermo-mechanical load using isogeometric analysis and adaptive hybrid evolutionary firefly algorithm	89-106
An, Xiaomin / Khoo, Boo Cheng / Cui, Yongdong	Nonlinear aeroelastic analysis of curved laminated composite panels	377-414
Youzera, Hadj / Meftah, Sid Ahmed	Nonlinear damping and forced vibration behaviour of sandwich beams with transverse normal stress	258-268
Sahmani, S. / Aghdam, M. M.	Nonlocal strain gradient beam model for nonlinear vibration of prebuckled and postbuckled multilayer functionally graded GPLRC nanobeams	77-88
Fattahi, Iman / Mirdamadi, Hamid Reza	Novel composite finite element model for piezoelectric energy harvesters based on 3D beam kinematics	161-171
Duarte, A. P. C. / Silvestre, N. / de Brito, J. / Júlio, E.	Numerical study of the compressive mechanical behaviour of rubberized concrete using the eXtended Finite Element Method (XFEM)	132-145
Askari, M. / Saidi, A. R. / Rezaei, A. S.	On natural frequencies of Levy-type thick porous-cellular plates surrounded by piezoelectric layers	340-354
Salvetti, M. / Sbarufatti, C. / Gilioli, A. / Dziendzikowski, M. / Dragan, K. / Manes, A. / Giglio, M.	On the mechanical response of CFRP composite with embedded optical fibre when subjected to low velocity impact and CAI tests	21-34
Patel, Nirav P. / Sharma, Dharmendra S.	On the stress concentration around a polygonal cut-out of complex geometry in an infinite orthotropic plate	415-436
Nguyen, Tan-Tien / Lee, Jaehong	Optimal design of thin-walled functionally graded beams for buckling problems	459-467
Jelušič, Primož / Kravanja, Stojan	Optimal design of timber-concrete composite floors based on the multi-parametric MINLP optimization	285-293
Liu, Yang / Straumit, Ilya / Vasiukov, Dmytro / Lomov, Stepan V. / Panier, Stéphane	Prediction of linear and non-linear behavior of 3D woven composite using mesoscopic voxel models reconstructed from X-ray micro-tomography	568-579
Lee, Su-Jin / Won, Jong-Pil	Resistibility of structural nano-synthetic fibre-reinforced cementitious composites in various chemical and physical environments	495-501
Soltanieh, Ghazaleh / Kabir, Mohammad Z. / Shariyat, Mohammad	A robust algorithm for behavior and effectiveness investigations of super-elastic SMA wires embedded in composite plates under impulse loading	355-367
Rahmani, Behrooz / Shenas, Amin Ghorbani	Robust vibration control of laminated rectangular composite plates in hygrothermal and thermal environment	665-681
Huang, Jian / Zhang, Qiuhua / Scarpa, Fabrizio / Liu, Yanju / Leng, Jinsong	Shape memory polymer-based hybrid honeycomb structures with zero Poisson’s ratio and variable stiffness	437-443
Zeighampour, Hamid / Beni, Yaghoub Tadi	Size dependent analysis of wave propagation in functionally graded composite cylindrical microshell reinforced by carbon nanotube	124-131
Deng, Jiaquan / Liu, Yongshou / Zhang, Zijun / Liu, Wei	Size-dependent vibration and stability of multi-span viscoelastic functionally graded material nanopipes conveying fluid using a hybrid method	590-600
Yang, Wanli / He, Dan / Chen, Wanji	A size-dependent zigzag model for composite laminated micro beams based on a modified couple stress theory	646-654
Sneed, L. H. / Ravazdezh, F. / Santandrea, M. / Imohamed, I. A. O. / Carloni, C.	A study of the compressive behavior of concrete columns confined with SRP jackets using digital image analysis	195-207
Magnucki, K. / Malinowski, M. / Magnucka-Blandzi, E. / Lewiński, J.	Three-point bending of a short beam with symmetrically varying mechanical properties	552-557
Bansal, Manik / Singh, I. V. / Mishra, B. K. / Sharma, Kamal / Khan, I. A.	A two-scale stochastic framework for predicting failure strength probability of heterogeneous materials	294-325
Kashani, M. Haghi / Hosseini, A. / Sassani, F. / Ko, F. K. / Milani, A. S.	Understanding different types of coupling in mechanical behavior of woven fabric reinforcements: A critical review and analysis	558-567
Serra, Joël / Pierré, J. E. / Passieux, J. C. / Périé, J. N. / Bouvet, Christophe / Castanié, Bruno	Validation and modeling of aeronautical composite structures subjected to combined loadings: The VERTEX project. Part 1: Experimental setup, FE-DIC instrumentation and procedures	224-244

Informations
sur cette fiche
IssueID
37808
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - novembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - novembre 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.