Composite Structures - May 2018

Published:	May 2018

Articles in this Issue

Author(s)	Title	Page(s)
Dong, Heng-Lei / Wang, Daiyu / Wang, Zhenyu / Sun, Yunlong	Axial compressive behavior of square concrete columns reinforced with innovative closed-type winding GFRP stirrups	115-125
Duarte, Isabel / Krstulović-Opara, Lovre / Vesenjak, Matej	Axial crush behaviour of the aluminium alloy in-situ foam filled tubes with very low wall thickness	184-192
Wei, Yang / Zhang, Xi / Wu, Gang / Zhou, Yongfeng	Behaviour of concrete confined by both steel spirals and fiber-reinforced polymer under axial load	577-591
Lieu, Qui X. / Lee, Seunghye / Kang, Joowon / Lee, Jaehong	Bending and free vibration analyses of in-plane bi-directional functionally graded plates with variable thickness using isogeometric analysis	434-451
Emara, M. / Torres, L. / Baena, M. / Barris, C. / Cahís, X.	Bond response of NSM CFRP strips in concrete under sustained loading and different temperature and humidity conditions	1-7
Kappel, Erik	Compensating process-induced distortions of composite structures: A short communication	67-71
Cao, Dongfeng / Duan, Qingfeng / Hu, Haixiao / Zhong, Yucheng / Li, Shuxin	Computational investigation of both intra-laminar matrix cracking and inter-laminar delamination of curved composite components with cohesive elements	300-309
Skovsgaard, Simon P. H. / Jensen, Henrik Myhre	Constitutive model for imperfectly bonded fibre-reinforced composites	82-92
Biscaia, Hugo C. / Chastre, Carlos	Design method and verification of steel plate anchorages for FRP-to-concrete bonded interfaces	52-66
Shi, Jin-Xing / Wu, Zhiqiang / Tsukimoto, Sunao / Shimoda, Masatoshi	Design optimization of cable–membrane structures for form-finding and stiffness maximization	528-536
Rondina, Francesco / Taddia, Sara / Mazzocchetti, Laura / Donati, Lorenzo / Minak, Giangiacomo / Rosenberg, Philipp / Bedeschi, Andrea / Dolcini, Enrico	Development of full carbon wheels for sport cars with high-volume technology	368-378
Ma, Qian / Peel, Larry D.	Development of spiral auxetic structures	310-316
Huang, Yixin / Wang, Tianshu / Zhao, Yang / Wang, Pingping	Effect of axially functionally graded material on whirling frequencies and critical speeds of a spinning Timoshenko beam	355-367
Safaei, Babak / Moradi-Dastjerdi, Rasool / Chu, Fulei	Effect of thermal gradient load on thermo-elastic vibrational behavior of sandwich plates reinforced by carbon nanotube agglomerations	28-37
Zhou, Xiandong / Huang, Kefu / Li, Zheng	Effects of bend-twist coupling on flutter limits of composite wind turbine blades	317-326
Wang, Xiaohong / Wang, Zhihai / Zeng, Tao / Cheng, Su / Yang, Fan	Exact analytical solution for steady-state heat transfer in functionally graded sandwich slabs with convective-radiative boundary conditions	379-386
Liu, P. F. / Li, X. K.	Explicit finite element analysis of failure behaviors of thermoplastic composites under transverse tension and shear	131-142
Yu, Qian-Qian / Wu, Yu-Fei	Fatigue retrofitting of cracked steel beams with CFRP laminates	232-244
Chen, Jiaxin / Chouw, Nawawi	Flexural behaviour of flax FRP double tube confined coconut fibre reinforced concrete beams with interlocking interface	217-224
Rajaneesh, A. / Zhao, Y. / Chai, G. B. / Sridhar, I.	Flexural fatigue life prediction of CFRP-Nomex honeycomb sandwich beams	225-231
Kärger, Luise / Galkin, Siegfried / Zimmerling, Clemens / Dörr, Dominik / Linden, Johannes / Oeckerath, André / Wolf, Klaus	Forming optimisation embedded in a CAE chain to assess and enhance the structural performance of composite components	143-152
Xue, Yaqiang / Jin, Guoyong / Ding, Hu / Chen, Mingfei	Free vibration analysis of in-plane functionally graded plates using a refined plate theory and isogeometric approach	193-205
Viglietti, A. / Zappino, E. / Carrera, E.	Free vibration analysis of locally damaged aerospace tapered composite structures using component-wise models	38-51
Zou, Xingxing / Feng, Peng / Wang, Jingquan / Wu, Yuwei / Feng, Yu	FRP stay-in-place form and shear key connection for FRP-concrete hybrid beams/decks	489-499
Nisini, E. / Santulli, C. / Ceruti, A. / Liverani, A.	High speed impact properties of carbon-basalt-flax DHEC composites compared with pure carbon fibre composites	165-172
Bull, D. J. / Spearing, S. M. / Sinclair, I.	Image-enhanced modelling of residual compressive after impact strength in laminated composites	20-27
Elamin, Mohammed / Li, Bing / Tan, K. T.	Impact damage of composite sandwich structures in arctic condition	422-433
Lu, X. D. / Zhao, J. / Mo, J. L. / Zhang, Q. / Zhang, X. / Zhou, Z. R.	Improvement of dynamical and tribological properties of friction systems by introducing parallel-grooved structures in elastic damping components	8-19
Yin, Hanfeng / Huang, Xiaofei / Scarpa, Fabrizio / Wen, Guilin / Chen, Yanyu / Zhang, Chao	In-plane crashworthiness of bio-inspired hierarchical honeycombs	516-527
Sadeghian, Pedram / Seracino, Rudolf / Das, Baishali / Lucier, Gregory	Influence of geometry and fiber properties on rupture strain of cylindrical FRP jackets under internal ICE pressure	173-183
Mahmoodi, M. J. / Vakilifard, M.	Interfacial effects on the damping properties of general carbon nanofiber reinforced nanocomposites – A multi-stage micromechanical analysis	397-421
Al-Shawk, Ahmed / Tanabi, Hamed / Sabuncuoglu, Baris	Investigation of stress distributions in the resin rich region and failure behavior in glass fiber composites with microvascular channels under tensile loading	101-114
Thai, Chien H. / Ferreira, A. J. M. / Nguyen-Xuan, H.	Isogeometric analysis of size-dependent isotropic and sandwich functionally graded microplates based on modified strain gradient elasticity theory	274-288
Gu, Dongdong / Ma, Ji / Chen, Hongyu / Lin, Kaijie / Xi, Lixia	Laser additive manufactured WC reinforced Fe-based composites with gradient reinforcement/matrix interface and enhanced performance	387-396
Kao, Yi-Tang / Amin, Anish Ravindra / Payne, Nolan / Wang, Jyhwen / Tai, Bruce L.	Low-velocity impact response of 3D-printed lattice structure with foam reinforcement	93-100
Park, Sang-Seon / Choe, Hyeon-Seok / Kwak, Byeong-Su / Choi, Jin-Ho / Kweon, Jin-Hwe	Micro-bolt repair for delaminated composite plate under compression	245-254
Yang, Liuyi / Tan, Huifeng / Cao, Zongsheng	Modeling and analysis of the ploy region of bistable composite cylindrical shells	347-354
Dastjerdi, Shahriar / Akgöz, Bekir	New static and dynamic analyses of macro and nano FGM plates using exact three-dimensional elasticity in thermal environment	626-641
Teter, Andrzej / Mania, Radoslaw J. / Kolakowski, Zbigniew	Non-linear stability and load-carrying capacity of thin-walled laminated columns in aspects of coupled buckling and coupled stiffness submatrix	72-81
Wang, Zhen-Xin / Shen, Hui-Shen	Nonlinear vibration of sandwich plates with FG-GRC face sheets in thermal environments	642-653
Feld, N. / Coussa, F. / Delattre, B.	A novel approach for the strain rate dependent modelling of woven composites	568-576
Chen, Xiao / Wang, Xiaojun / Qiu, Zhiping / Wang, Lei / Li, Xiao / Shi, Qinghe	A novel reliability-based two-level optimization method for composite laminated structures	336-346
Zhang, Dahai / Fei, Qingguo / Jiang, Dong / Li, Yanbin	Numerical and analytical investigation on crushing of fractal-like honeycombs with self-similar hierarchy	289-299
Xie, Junbo / Fang, Guodong / Chen, Zhen / Liang, Jun	Numerical and experimental studies on scattered mechanical properties for 3D needled C/C-SiC composites	545-554
Ta, Wurui / Gao, Yuanwen	Numerical simulation of the electro-thermo-mechanical behaviors of a high-temperature superconducting cable	616-625
Vescovini, R. / Dozio, L. / D'Ottavio, M. / Polit, O.	On the application of the Ritz method to free vibration and buckling analysis of highly anisotropic plates	460-474
Macquart, T. / Maes, V. / Bordogna, Marco T. / Pirrera, A. / Weaver, P. M.	Optimisation of composite structures – Enforcing the feasibility of lamination parameter constraints with computationally-efficient maps	605-615
Plachy, T. / Kratina, O. / Sedlačík, M.	Porous magnetic materials based on EPDM rubber filled with carbonyl iron particles	126-130
Liguori, Francesco S. / Madeo, Antonio / Magisano, Domenico / Leonetti, Leonardo / Garcea, Giovanni	Post-buckling optimisation strategy of imperfection sensitive composite shells using Koiter method and Monte Carlo simulation	654-670
Wang, Bing / Fang, Guodong / Liu, Shuo / Fu, Maoqing / Liang, Jun	Progressive damage analysis of 3D braided composites using FFT-based method	255-263
Stamopoulos, A. G. / Tserpes, K. I. / Dentsoras, A. J.	Quality assessment of porous CFRP specimens using X-ray Computed Tomography data and Artificial Neural Networks	327-335
Wu, Fei / Xiao, Xiaoting / Dong, Yong / Yang, Jie / Yu, Yeqiu	Quasi-static axial crush response and energy absorption of layered composite structure formed from novel crochet-sintered mesh tube and thin-walled tube	592-604
Yao, Yongtao / Luo, Yun / Lu, Haibao / Wang, Bing	Remotely actuated porous composite membrane with shape memory property	507-515
Wang, Daiyu / Wang, Zhenyu / Yu, Tao / Li, Hui	Seismic performance of CFRP-retrofitted large-scale rectangular RC columns under lateral loading in different directions	475-488
Manta, Asimina / Gresil, Matthieu / Soutis, Constantinos	Simulated electrical response of randomly distributed and aligned graphene/polymer nanocomposites	452-459
Siwowski, Tomasz / Kaleta, Damian / Rajchel, Mateusz	Structural behaviour of an all-composite road bridge	555-567
Hao, Wenqian / Xie, Jiamiao / Wang, Fenghui	Theoretical prediction for large deflection with local indentation of sandwich beam under quasi-static lateral loading	206-216
Bahmani, Aram / Li, Geng / Willett, Thomas L. / Montesano, John	Three-dimensional microscopic assessment of randomly distributed representative volume elements for high fiber volume fraction unidirectional composites	153-164
Mieloszyk, Magdalena / Majewska, Katarzyna / Ostachowicz, Wieslaw	THz spectroscopy application for detection and localisation of water inclusion in glass composite	537-544
Zhu, Kaige / Qing, Xinlin P. / Liu, Bin	A two-step impact localization method for composite structures with a parameterized laminate model	500-506
Foster, P. / Abdelal, G. / Murphy, A.	Understanding how arc attachment behaviour influences the prediction of composite specimen thermal loading during an artificial lightning strike test	671-683
Ma, Li / Shen, Chuanchuan / Zhang, Anda / Wang, Xiaogui / Liang, Lihua / Zheng, Jinyang	Virtual tests of elastodynamic response of natural fiber-reinforced orthotropic plates	264-273

About this
data sheet
IssueID
37797
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - May 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - May 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.