Composite Structures - mai 2018

Publié:	mai 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Dong, Heng-Lei / Wang, Daiyu / Wang, Zhenyu / Sun, Yunlong	Axial compressive behavior of square concrete columns reinforced with innovative closed-type winding GFRP stirrups	115-125
Duarte, Isabel / Krstulović-Opara, Lovre / Vesenjak, Matej	Axial crush behaviour of the aluminium alloy in-situ foam filled tubes with very low wall thickness	184-192
Wei, Yang / Zhang, Xi / Wu, Gang / Zhou, Yongfeng	Behaviour of concrete confined by both steel spirals and fiber-reinforced polymer under axial load	577-591
Lieu, Qui X. / Lee, Seunghye / Kang, Joowon / Lee, Jaehong	Bending and free vibration analyses of in-plane bi-directional functionally graded plates with variable thickness using isogeometric analysis	434-451
Emara, M. / Torres, L. / Baena, M. / Barris, C. / Cahís, X.	Bond response of NSM CFRP strips in concrete under sustained loading and different temperature and humidity conditions	1-7
Kappel, Erik	Compensating process-induced distortions of composite structures: A short communication	67-71
Cao, Dongfeng / Duan, Qingfeng / Hu, Haixiao / Zhong, Yucheng / Li, Shuxin	Computational investigation of both intra-laminar matrix cracking and inter-laminar delamination of curved composite components with cohesive elements	300-309
Skovsgaard, Simon P. H. / Jensen, Henrik Myhre	Constitutive model for imperfectly bonded fibre-reinforced composites	82-92
Biscaia, Hugo C. / Chastre, Carlos	Design method and verification of steel plate anchorages for FRP-to-concrete bonded interfaces	52-66
Shi, Jin-Xing / Wu, Zhiqiang / Tsukimoto, Sunao / Shimoda, Masatoshi	Design optimization of cable–membrane structures for form-finding and stiffness maximization	528-536
Rondina, Francesco / Taddia, Sara / Mazzocchetti, Laura / Donati, Lorenzo / Minak, Giangiacomo / Rosenberg, Philipp / Bedeschi, Andrea / Dolcini, Enrico	Development of full carbon wheels for sport cars with high-volume technology	368-378
Ma, Qian / Peel, Larry D.	Development of spiral auxetic structures	310-316
Huang, Yixin / Wang, Tianshu / Zhao, Yang / Wang, Pingping	Effect of axially functionally graded material on whirling frequencies and critical speeds of a spinning Timoshenko beam	355-367
Safaei, Babak / Moradi-Dastjerdi, Rasool / Chu, Fulei	Effect of thermal gradient load on thermo-elastic vibrational behavior of sandwich plates reinforced by carbon nanotube agglomerations	28-37
Zhou, Xiandong / Huang, Kefu / Li, Zheng	Effects of bend-twist coupling on flutter limits of composite wind turbine blades	317-326
Wang, Xiaohong / Wang, Zhihai / Zeng, Tao / Cheng, Su / Yang, Fan	Exact analytical solution for steady-state heat transfer in functionally graded sandwich slabs with convective-radiative boundary conditions	379-386
Liu, P. F. / Li, X. K.	Explicit finite element analysis of failure behaviors of thermoplastic composites under transverse tension and shear	131-142
Yu, Qian-Qian / Wu, Yu-Fei	Fatigue retrofitting of cracked steel beams with CFRP laminates	232-244
Chen, Jiaxin / Chouw, Nawawi	Flexural behaviour of flax FRP double tube confined coconut fibre reinforced concrete beams with interlocking interface	217-224
Rajaneesh, A. / Zhao, Y. / Chai, G. B. / Sridhar, I.	Flexural fatigue life prediction of CFRP-Nomex honeycomb sandwich beams	225-231
Kärger, Luise / Galkin, Siegfried / Zimmerling, Clemens / Dörr, Dominik / Linden, Johannes / Oeckerath, André / Wolf, Klaus	Forming optimisation embedded in a CAE chain to assess and enhance the structural performance of composite components	143-152
Xue, Yaqiang / Jin, Guoyong / Ding, Hu / Chen, Mingfei	Free vibration analysis of in-plane functionally graded plates using a refined plate theory and isogeometric approach	193-205
Viglietti, A. / Zappino, E. / Carrera, E.	Free vibration analysis of locally damaged aerospace tapered composite structures using component-wise models	38-51
Zou, Xingxing / Feng, Peng / Wang, Jingquan / Wu, Yuwei / Feng, Yu	FRP stay-in-place form and shear key connection for FRP-concrete hybrid beams/decks	489-499
Nisini, E. / Santulli, C. / Ceruti, A. / Liverani, A.	High speed impact properties of carbon-basalt-flax DHEC composites compared with pure carbon fibre composites	165-172
Bull, D. J. / Spearing, S. M. / Sinclair, I.	Image-enhanced modelling of residual compressive after impact strength in laminated composites	20-27
Elamin, Mohammed / Li, Bing / Tan, K. T.	Impact damage of composite sandwich structures in arctic condition	422-433
Lu, X. D. / Zhao, J. / Mo, J. L. / Zhang, Q. / Zhang, X. / Zhou, Z. R.	Improvement of dynamical and tribological properties of friction systems by introducing parallel-grooved structures in elastic damping components	8-19
Yin, Hanfeng / Huang, Xiaofei / Scarpa, Fabrizio / Wen, Guilin / Chen, Yanyu / Zhang, Chao	In-plane crashworthiness of bio-inspired hierarchical honeycombs	516-527
Sadeghian, Pedram / Seracino, Rudolf / Das, Baishali / Lucier, Gregory	Influence of geometry and fiber properties on rupture strain of cylindrical FRP jackets under internal ICE pressure	173-183
Mahmoodi, M. J. / Vakilifard, M.	Interfacial effects on the damping properties of general carbon nanofiber reinforced nanocomposites – A multi-stage micromechanical analysis	397-421
Al-Shawk, Ahmed / Tanabi, Hamed / Sabuncuoglu, Baris	Investigation of stress distributions in the resin rich region and failure behavior in glass fiber composites with microvascular channels under tensile loading	101-114
Thai, Chien H. / Ferreira, A. J. M. / Nguyen-Xuan, H.	Isogeometric analysis of size-dependent isotropic and sandwich functionally graded microplates based on modified strain gradient elasticity theory	274-288
Gu, Dongdong / Ma, Ji / Chen, Hongyu / Lin, Kaijie / Xi, Lixia	Laser additive manufactured WC reinforced Fe-based composites with gradient reinforcement/matrix interface and enhanced performance	387-396
Kao, Yi-Tang / Amin, Anish Ravindra / Payne, Nolan / Wang, Jyhwen / Tai, Bruce L.	Low-velocity impact response of 3D-printed lattice structure with foam reinforcement	93-100
Park, Sang-Seon / Choe, Hyeon-Seok / Kwak, Byeong-Su / Choi, Jin-Ho / Kweon, Jin-Hwe	Micro-bolt repair for delaminated composite plate under compression	245-254
Yang, Liuyi / Tan, Huifeng / Cao, Zongsheng	Modeling and analysis of the ploy region of bistable composite cylindrical shells	347-354
Dastjerdi, Shahriar / Akgöz, Bekir	New static and dynamic analyses of macro and nano FGM plates using exact three-dimensional elasticity in thermal environment	626-641
Teter, Andrzej / Mania, Radoslaw J. / Kolakowski, Zbigniew	Non-linear stability and load-carrying capacity of thin-walled laminated columns in aspects of coupled buckling and coupled stiffness submatrix	72-81
Wang, Zhen-Xin / Shen, Hui-Shen	Nonlinear vibration of sandwich plates with FG-GRC face sheets in thermal environments	642-653
Feld, N. / Coussa, F. / Delattre, B.	A novel approach for the strain rate dependent modelling of woven composites	568-576
Chen, Xiao / Wang, Xiaojun / Qiu, Zhiping / Wang, Lei / Li, Xiao / Shi, Qinghe	A novel reliability-based two-level optimization method for composite laminated structures	336-346
Zhang, Dahai / Fei, Qingguo / Jiang, Dong / Li, Yanbin	Numerical and analytical investigation on crushing of fractal-like honeycombs with self-similar hierarchy	289-299
Xie, Junbo / Fang, Guodong / Chen, Zhen / Liang, Jun	Numerical and experimental studies on scattered mechanical properties for 3D needled C/C-SiC composites	545-554
Ta, Wurui / Gao, Yuanwen	Numerical simulation of the electro-thermo-mechanical behaviors of a high-temperature superconducting cable	616-625
Vescovini, R. / Dozio, L. / D'Ottavio, M. / Polit, O.	On the application of the Ritz method to free vibration and buckling analysis of highly anisotropic plates	460-474
Macquart, T. / Maes, V. / Bordogna, Marco T. / Pirrera, A. / Weaver, P. M.	Optimisation of composite structures – Enforcing the feasibility of lamination parameter constraints with computationally-efficient maps	605-615
Plachy, T. / Kratina, O. / Sedlačík, M.	Porous magnetic materials based on EPDM rubber filled with carbonyl iron particles	126-130
Liguori, Francesco S. / Madeo, Antonio / Magisano, Domenico / Leonetti, Leonardo / Garcea, Giovanni	Post-buckling optimisation strategy of imperfection sensitive composite shells using Koiter method and Monte Carlo simulation	654-670
Wang, Bing / Fang, Guodong / Liu, Shuo / Fu, Maoqing / Liang, Jun	Progressive damage analysis of 3D braided composites using FFT-based method	255-263
Stamopoulos, A. G. / Tserpes, K. I. / Dentsoras, A. J.	Quality assessment of porous CFRP specimens using X-ray Computed Tomography data and Artificial Neural Networks	327-335
Wu, Fei / Xiao, Xiaoting / Dong, Yong / Yang, Jie / Yu, Yeqiu	Quasi-static axial crush response and energy absorption of layered composite structure formed from novel crochet-sintered mesh tube and thin-walled tube	592-604
Yao, Yongtao / Luo, Yun / Lu, Haibao / Wang, Bing	Remotely actuated porous composite membrane with shape memory property	507-515
Wang, Daiyu / Wang, Zhenyu / Yu, Tao / Li, Hui	Seismic performance of CFRP-retrofitted large-scale rectangular RC columns under lateral loading in different directions	475-488
Manta, Asimina / Gresil, Matthieu / Soutis, Constantinos	Simulated electrical response of randomly distributed and aligned graphene/polymer nanocomposites	452-459
Siwowski, Tomasz / Kaleta, Damian / Rajchel, Mateusz	Structural behaviour of an all-composite road bridge	555-567
Hao, Wenqian / Xie, Jiamiao / Wang, Fenghui	Theoretical prediction for large deflection with local indentation of sandwich beam under quasi-static lateral loading	206-216
Bahmani, Aram / Li, Geng / Willett, Thomas L. / Montesano, John	Three-dimensional microscopic assessment of randomly distributed representative volume elements for high fiber volume fraction unidirectional composites	153-164
Mieloszyk, Magdalena / Majewska, Katarzyna / Ostachowicz, Wieslaw	THz spectroscopy application for detection and localisation of water inclusion in glass composite	537-544
Zhu, Kaige / Qing, Xinlin P. / Liu, Bin	A two-step impact localization method for composite structures with a parameterized laminate model	500-506
Foster, P. / Abdelal, G. / Murphy, A.	Understanding how arc attachment behaviour influences the prediction of composite specimen thermal loading during an artificial lightning strike test	671-683
Ma, Li / Shen, Chuanchuan / Zhang, Anda / Wang, Xiaogui / Liang, Lihua / Zheng, Jinyang	Virtual tests of elastodynamic response of natural fiber-reinforced orthotropic plates	264-273

Informations
sur cette fiche
IssueID
37797
Publié(e) le:
23.10.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - mai 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - mai 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.