Composite Structures - September 2018

Published:	September 2018

Articles in this Issue

Author(s)	Title	Page(s)
Xu, Rui / Bouby, Céline / Zahrouni, Hamid / Zineb, Tarak Ben / Hu, Heng / Potier-Ferry, Michel	3D modeling of shape memory alloy fiber reinforced composites by multiscale finite element method	408-419
Yazdani Sarvestani, H. / Akbarzadeh, A. H. / Niknam, H. / Hermenean, K.	3D printed architected polymeric sandwich panels: Energy absorption and structural performance	886-909
Carrazedo, Rogério / Paccola, Rodrigo Ribeiro / Coda, Humberto Breves	Active face prismatic positional finite element for linear and geometrically nonlinear analysis of honeycomb sandwich plates and shells	849-863
Jiang, Guoqing / Li, Fengming	Aerothermoelastic analysis of composite laminated trapezoidal panels in supersonic airflow	313-327
Alipour, M. M. / Shariyat, M.	Analytical layerwise stress and deformation analysis of laminated composite plates with arbitrary shapes of interfacial imperfections and discontinuous lateral deflections	88-102
Golewski, Grzegorz Ludwik	An assessment of microcracks in the Interfacial Transition Zone of durable concrete composites with fly ash additives	515-520
Maazoun, Azer / Belkassem, Bachir / Reymen, Bruno / Matthys, Stijn / Vantomme, John / Lecompte, David	Blast response of RC slabs with externally bonded reinforcement: Experimental and analytical verification	246-257
Vahedian, Abbas / Shrestha, Rijun / Crews, Keith	Bond strength model for externally bonded FRP-to-timber interface	328-339
Liu, Zibo / Rumpler, Romain / Feng, Leping	Broadband locally resonant metamaterial sandwich plate for improved noise insulation in the coincidence region	165-172
Xu, Xiangyu / Zhang, Boming / Xing, Liying / Liu, Kai / Bai, Ming / Liu, Dawei	Characterization and analysis of the thermal damages of aramid/epoxy composite laminates induced by the dielectric heating effect of microwaves	371-379
Grande, Ernesto / Fagone, Mario / Rotunno, Tommaso / Bertolesi, Elisa / Milani, Gabriele	Coupled interface-based modelling approach for the numerical analysis of curved masonry specimens strengthened by CFRP	498-506
Kimmig, Stefan / You, Jeong-Ha	Cyclic plastic behavior of unidirectional SiC fibre-reinforced copper composites under uniaxial loads: An experimental and computational study	555-564
Silva Lobo, Paulo / Faustino, Pedro / Jesus, Mariana / Marreiros, Rui	Design model of concrete for circular columns confined with AFRP	69-78
Madadi, Hamidreza / Farrokhabadi, Amin	Development a refined numerical model for evaluating the matrix cracking and induced delamination formation in cross-ply composite laminates	12-24
Lee, Sang-Youl	Dynamic instability assessment of carbon nanotube/fiber/polymer multiscale composite skew plates with delamination based on HSDT	757-770
Seraj, Saemul / Ganesan, Rajamohan	Dynamic instability of rotating doubly-tapered laminated composite beams under periodic rotational speeds	711-728
Yousefsani, S. A. / Tahani, M.	Edge effects in adhesively bonded composite joints integrated with piezoelectric patches	187-194
Todoroki, Akira / Yamane, Takuya	Effect of dents in laminated carbon composite beams on modified anisotropic electric potential analysis	340-345
Hu, Dayong / Song, Bin / Dang, Linwei / Zhang, Zhiqiang	Effect of strain rate on mechanical properties of the bamboo material under quasi-static and dynamic loading condition	635-646
Hu, Yang / Fang, Qin-Zhi / Sha, Bao-Lin / Zhao, Modi	Effect of the large cells on the fatigue properties of closed-cell aluminum alloy foam	59-68
Arachchige, B. / Ghasemnejad, H.	Effect of variable core stiffness on the impact response of curved sandwich plates	565-578
Cao, Dongfeng / Duan, Qingfeng / Li, Shuxin / Zhong, Yucheng / Hu, Haixiao	' Effects of thermal residual stresses and thermal-induced geometrically necessary dislocations on size-dependent strengthening of particle-reinforced MMCs	290-297
Reshad Noori, Ahmad / Alp Aslan, Timuçin / Temel, Beytullah	An efficient approach for in-plane free and forced vibrations of axially functionally graded parabolic arches with nonuniform cross section	701-710
Zhang, Peng / Wei, Peijun / Li, Yueqiu	The elastic wave propagation through the finite and infinite periodic laminated structure of micropolar elasticity	358-370
Li, Mingzhe / Li, Junfeng / Barbat, Saeed / Baccouche, Ridha / Lu, Weiyi	Enhanced filler-tube wall interaction in liquid nanofoam-filled thin-walled tubes	120-126
Yademellat, Hesam / Nikbakht, Ali / Saghafi, Hamed / Sadighi, Mojtaba	Experimental and numerical investigation of low velocity impact on electrospun nanofiber modified composite laminates	507-514
Guo, Kailing / Zhu, Ling / Li, Yinggang / Yu, T. X. / Shenoi, Ajit / Zhou, Qingwen	Experimental investigation on the dynamic behaviour of aluminum foam sandwich plate under repeated impacts	298-305
Yu, Liping / Pan, Bing	Experimental study of tensile properties and deformation evolutions of 2D and 2.5D woven SiO2f/SiO2 composites using single-camera stereo-digital image correlation	589-598
Barris, Cristina / Correia, Luís / Sena-Cruz, José	Experimental study on the bond behaviour of a transversely compressed mechanical anchorage system for externally bonded reinforcement	217-228
Hamidi, H. / Xiong, W. / Hoa, S. V. / Ganesan, R.	Fatigue behavior of thick composite laminates under flexural loading	277-289
Guo, Guodong	Finite element analysis of pre-stretch effects on ballistic impact performance of woven fabrics	173-186
Ang, J. Y. / Abdul Majid, M. S. / Mohd Nor, A. / Yaacob, S. / Ridzuan, M. J. M.	First-ply failure prediction of glass/epoxy composite pipes using an artificial neural network model	579-588
Zhai, Yanchun / Li, Yan / Liang, Sen	Free vibration analysis of five-layered composite sandwich plates with two-layered viscoelastic cores	346-357
Peeters, Mathijs / Santo, Gilberto / Degroote, Joris / Van Paepegem, Wim	High-fidelity finite element models of composite wind turbine blades with shell and solid elements	521-531
Kim, Sang-Woo / Jang, Hosung	Impact localization on a composite plate based on error outliers with Pugh’s concept selection	449-465
Liu, Hu / Yang, Jialing / Liu, Hua	Impact response of low-density foam impinging onto viscoelastic bar: A theoretical analysis	47-58
Fu, B. / Tang, X. T. / Li, L. J. / Liu, F. / Lin, G.	Inclined FRP U-jackets for enhancing structural performance of FRP-plated RC beams suffering from IC debonding	36-46
Berardi, V. P. / Feo, L. / Mancusi, G. / De Piano, M.	Influence of reinforcement viscous properties on reliability of existing structures strengthened with externally bonded composites	532-539
Narducci, F. / Pinho, S. T.	Interaction between nacre-like CFRP mesolayers and long-fibre interlayers	921-928
Lee, Hak Gu / Lee, Jungwan	Measurement theory of test bending moments for resonance-type fatigue testing of a full-scale wind turbine blade	306-312
Carpier, Y. / Vieille, B. / Maaroufi, M. A. / Coppalle, A. / Barbe, F.	Mechanical behavior of carbon fibers polyphenylene sulfide composites exposed to radiant heat flux and constant compressive force	1-11
Yan, Y. / Carrera, E. / de Miguel, A. G. / Pagani, A. / Ren, Q.-W.	Meshless analysis of metallic and composite beam structures by advanced hierarchical models with layer-wise capabilities	380-395
Cornejo, A. / Barbu, L. G. / Escudero, C. / Martinez, X. / Oller, S. / Barbat, A. H.	Methodology for the analysis of post-tensioned structures using a constitutive serial-parallel rule of mixtures	480-497
Koutsawa, Yao / Karatrantos, Argyrios / Yu, Wenbin / Ruch, David	A micromechanics approach for the effective thermal conductivity of composite materials with general linear imperfect interfaces	747-756
Tian, Fang / Zhong, Zheng / Pan, Yihui	Modeling of natural fiber reinforced composites under hygrothermal ageing	144-152
Grigoriou, K. / Mouritz, A. P.	Modelling and testing of fibre metal laminates and their constituent materials in fire	25-35
de Sousa, Bruno Silva / Gomes, Guilherme Ferreira / Jorge, Ariosto Bretanha / da Cunha, Sebastião Simões / Ancelotti, Antônio Carlos	A modified topological sensitivity analysis extended to the design of composite multidirectional laminates structures	729-746
Rai, Ashwin / Chattopadhyay, Aditi	Multifidelity multiscale modeling of nanocomposites for microstructure and macroscale analysis	204-216
El Said, Bassam / Hallett, Stephen R.	Multiscale surrogate modelling of the elastic response of thick composite structures with embedded defects and features	781-798
Barretta, R. / Fazelzadeh, S. A. / Feo, L. / Ghavanloo, E. / Luciano, R.	Nonlocal inflected nano-beams: A stress-driven approach of bi-Helmholtz type	239-245
Fan, Haifeng / Vassilopoulos, Anastasios P. / Keller, Thomas	Numerical and analytical investigation of tensile behavior of non-laminated and laminated CFRP straps	79-87
Kinvi-Dossou, G. / Matadi Boumbimba, R. / Bonfoh, N. / Koutsawa, Y. / Eccli, D. / Gérard, P.	A numerical homogenization of E-glass/acrylic woven composite laminates: Application to low velocity impact	540-554
D'Altri, Antonio Maria / Carloni, Christian / de Miranda, Stefano / Castellazzi, Giovanni	Numerical modeling of FRP strips bonded to a masonry substrate	420-433
Cameselle-Molares, Aida / Vassilopoulos, Anastasios P. / Renart, Jordi / Turon, Albert / Keller, Thomas	Numerical simulation of two-dimensional in-plane crack propagation in FRP laminates	396-407
Sabik, A.	Progressive failure analysis of laminates in the framework of 6-field non-linear shell theory	195-203
Wang, Yanlei / Wang, Yongshuai / Wan, Baolin / Han, Baoguo / Cai, Gaochuang / Li, Zhizheng	Properties and mechanisms of self-sensing carbon nanofibers/epoxy composites for structural health monitoring	669-678
Ascione, F. / Lamberti, M. / Razaqpur, A. G. / Spadea, S. / Malagic, M.	Pseudo-ductile failure of adhesively joined GFRP beam-column connections: An experimental and numerical investigation	864-873
Garulli, Torquato / Catapano, Anita / Montemurro, Marco / Jumel, Julien / Fanteria, Daniele	Quasi-trivial stacking sequences for the design of thick laminates	614-623
Yang, Wanli / He, Dan / Hu, Yuantai	A refined beam model for anisotropic nanobeams based on Eringen's differential constitutive model	771-780
Patel, Shivdayal / Guedes Soares, C.	Reliability assessment of glass epoxy composite plates due to low velocity impact	659-668
Wang, Gong-Dong / Melly, Stephen Kirwa / Li, Nan / Peng, Tian / Li, Yingchi	Research on milling strategies to reduce delamination damage during machining of holes in CFRP/Ti stack	679-688
Sutherland, L. S.	A review of impact testing on marine composite materials: Part IV – Scaling, strain rate and marine-type laminates	929-938
Khan, Muhammad Irfan / Al-Osta, Mohammed Ali / Ahmad, Shamsad / Rahman, Muhammad Kalimur	Seismic behavior of beam-column joints strengthened with ultra-high performance fiber reinforced concrete	103-119
Wu, Xiangguo / Kang, Thomas H.-K. / Lin, Yang / Hwang, Hyeon-Jong	Shear strength of reinforced concrete beams with precast High-Performance Fiber-Reinforced Cementitious Composite permanent form	829-838
Rotunno, Tommaso / Fagone, Mario / Bertolesi, Elisa / Grande, Ernesto / Milani, Gabriele	Single lap shear tests of masonry curved pillars externally strengthened by CFRP strips	434-448
Moradi-Dastjerdi, Rasool / Aghadavoudi, Farshid	Static analysis of functionally graded nanocomposite sandwich plates reinforced by defected CNT	839-848
Zhang, Shufeng / Wang, Hao / Zhang, Li / Chen, Xun	Statistical correlation between elastic properties of plain-weave composite and its influence on structure reliability	939-945
Mohammadi, Mohsen / Eghtesad, Mohammad / Mohammadi, Hossein	Stochastic analysis of pull-in instability of geometrically nonlinear size-dependent FGM micro beams with random material properties	466-479
Li, Yi / Chen, Zhangxing / Su, Lingxuan / Chen, Wei / Jin, Xuejun / Xu, Hongyi	Stochastic reconstruction and microstructure modeling of SMC chopped fiber composites	153-164
El Kouri, M. / Bakkali, A. / Azrar, L.	Straightforward mathematical modeling of the time-dependent behavior of non-ageing viscoelastic composites with multi-coated inclusions	689-700
Wang, Wenjie / Zhang, Xuejie / Chouw, Nawawi / Li, Zhongxian / Shi, Yanchao	Strain rate effect on the dynamic tensile behaviour of flax fibre reinforced polymer	135-143
Zeng, Jun-Jie / Guo, Yong-Chang / Gao, Wan-Yang / Chen, Wei-Peng / Li, Li-Juan	Stress-strain behavior of concrete in circular concrete columns partially wrapped with FRP strips	810-828
Vemuluri, Ramesh Babu / Rajamohan, Vasudevan / Sudhagar, P. Edwin	Structural optimization of tapered composite sandwich plates partially treated with magnetorheological elastomers	258-276
Heshmati, M. / Daneshmand, F.	A study on the vibrational properties of weight-efficient plates made of material with functionally graded porosity	229-238
Mariam, M. / Afendi, M. / Abdul Majid, M. S. / Ridzuan, M. J. M. / Gibson, A. G.	Tensile and fatigue properties of single lap joints of aluminium alloy/glass fibre reinforced composites fabricated with different joining methods	647-658
Jiang, Shiyong / Yao, Weilai / Chen, Jin / Tao, Shuai	Time dependent behavior of FRP-strengthened RC beams subjected to preload: Experimental study and finite element modeling	599-613
Wu, Peng / Hu, Chao / Qin, Qing-Hua	Time-dependent behavior of layered magneto-electro-elastic cylindrical shell with viscoelastic interlayer	874-885
Irshidat, Mohammad R. / Al-Shannaq, Ammar	Using textile reinforced mortar modified with carbon nano tubes to improve flexural performance of RC beams	127-134
Capozucca, R.	Vibration analysis of damaged RC beams strengthened with GFRP	624-634
Wang, Miao / Li, Zhi-Min / Qiao, Pizhong	Vibration analysis of sandwich plates with carbon nanotube-reinforced composite face-sheets	799-809
Ghayesh, Mergen H.	Vibration analysis of shear-deformable AFG imperfect beams	910-920

About this
data sheet
IssueID
37788
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - September 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - September 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.