Composite Structures - September 2018

Erschienen:	September 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Xu, Rui / Bouby, Céline / Zahrouni, Hamid / Zineb, Tarak Ben / Hu, Heng / Potier-Ferry, Michel	3D modeling of shape memory alloy fiber reinforced composites by multiscale finite element method	408-419
Yazdani Sarvestani, H. / Akbarzadeh, A. H. / Niknam, H. / Hermenean, K.	3D printed architected polymeric sandwich panels: Energy absorption and structural performance	886-909
Carrazedo, Rogério / Paccola, Rodrigo Ribeiro / Coda, Humberto Breves	Active face prismatic positional finite element for linear and geometrically nonlinear analysis of honeycomb sandwich plates and shells	849-863
Jiang, Guoqing / Li, Fengming	Aerothermoelastic analysis of composite laminated trapezoidal panels in supersonic airflow	313-327
Alipour, M. M. / Shariyat, M.	Analytical layerwise stress and deformation analysis of laminated composite plates with arbitrary shapes of interfacial imperfections and discontinuous lateral deflections	88-102
Golewski, Grzegorz Ludwik	An assessment of microcracks in the Interfacial Transition Zone of durable concrete composites with fly ash additives	515-520
Maazoun, Azer / Belkassem, Bachir / Reymen, Bruno / Matthys, Stijn / Vantomme, John / Lecompte, David	Blast response of RC slabs with externally bonded reinforcement: Experimental and analytical verification	246-257
Vahedian, Abbas / Shrestha, Rijun / Crews, Keith	Bond strength model for externally bonded FRP-to-timber interface	328-339
Liu, Zibo / Rumpler, Romain / Feng, Leping	Broadband locally resonant metamaterial sandwich plate for improved noise insulation in the coincidence region	165-172
Xu, Xiangyu / Zhang, Boming / Xing, Liying / Liu, Kai / Bai, Ming / Liu, Dawei	Characterization and analysis of the thermal damages of aramid/epoxy composite laminates induced by the dielectric heating effect of microwaves	371-379
Grande, Ernesto / Fagone, Mario / Rotunno, Tommaso / Bertolesi, Elisa / Milani, Gabriele	Coupled interface-based modelling approach for the numerical analysis of curved masonry specimens strengthened by CFRP	498-506
Kimmig, Stefan / You, Jeong-Ha	Cyclic plastic behavior of unidirectional SiC fibre-reinforced copper composites under uniaxial loads: An experimental and computational study	555-564
Silva Lobo, Paulo / Faustino, Pedro / Jesus, Mariana / Marreiros, Rui	Design model of concrete for circular columns confined with AFRP	69-78
Madadi, Hamidreza / Farrokhabadi, Amin	Development a refined numerical model for evaluating the matrix cracking and induced delamination formation in cross-ply composite laminates	12-24
Lee, Sang-Youl	Dynamic instability assessment of carbon nanotube/fiber/polymer multiscale composite skew plates with delamination based on HSDT	757-770
Seraj, Saemul / Ganesan, Rajamohan	Dynamic instability of rotating doubly-tapered laminated composite beams under periodic rotational speeds	711-728
Yousefsani, S. A. / Tahani, M.	Edge effects in adhesively bonded composite joints integrated with piezoelectric patches	187-194
Todoroki, Akira / Yamane, Takuya	Effect of dents in laminated carbon composite beams on modified anisotropic electric potential analysis	340-345
Hu, Dayong / Song, Bin / Dang, Linwei / Zhang, Zhiqiang	Effect of strain rate on mechanical properties of the bamboo material under quasi-static and dynamic loading condition	635-646
Hu, Yang / Fang, Qin-Zhi / Sha, Bao-Lin / Zhao, Modi	Effect of the large cells on the fatigue properties of closed-cell aluminum alloy foam	59-68
Arachchige, B. / Ghasemnejad, H.	Effect of variable core stiffness on the impact response of curved sandwich plates	565-578
Cao, Dongfeng / Duan, Qingfeng / Li, Shuxin / Zhong, Yucheng / Hu, Haixiao	' Effects of thermal residual stresses and thermal-induced geometrically necessary dislocations on size-dependent strengthening of particle-reinforced MMCs	290-297
Reshad Noori, Ahmad / Alp Aslan, Timuçin / Temel, Beytullah	An efficient approach for in-plane free and forced vibrations of axially functionally graded parabolic arches with nonuniform cross section	701-710
Zhang, Peng / Wei, Peijun / Li, Yueqiu	The elastic wave propagation through the finite and infinite periodic laminated structure of micropolar elasticity	358-370
Li, Mingzhe / Li, Junfeng / Barbat, Saeed / Baccouche, Ridha / Lu, Weiyi	Enhanced filler-tube wall interaction in liquid nanofoam-filled thin-walled tubes	120-126
Yademellat, Hesam / Nikbakht, Ali / Saghafi, Hamed / Sadighi, Mojtaba	Experimental and numerical investigation of low velocity impact on electrospun nanofiber modified composite laminates	507-514
Guo, Kailing / Zhu, Ling / Li, Yinggang / Yu, T. X. / Shenoi, Ajit / Zhou, Qingwen	Experimental investigation on the dynamic behaviour of aluminum foam sandwich plate under repeated impacts	298-305
Yu, Liping / Pan, Bing	Experimental study of tensile properties and deformation evolutions of 2D and 2.5D woven SiO2f/SiO2 composites using single-camera stereo-digital image correlation	589-598
Barris, Cristina / Correia, Luís / Sena-Cruz, José	Experimental study on the bond behaviour of a transversely compressed mechanical anchorage system for externally bonded reinforcement	217-228
Hamidi, H. / Xiong, W. / Hoa, S. V. / Ganesan, R.	Fatigue behavior of thick composite laminates under flexural loading	277-289
Guo, Guodong	Finite element analysis of pre-stretch effects on ballistic impact performance of woven fabrics	173-186
Ang, J. Y. / Abdul Majid, M. S. / Mohd Nor, A. / Yaacob, S. / Ridzuan, M. J. M.	First-ply failure prediction of glass/epoxy composite pipes using an artificial neural network model	579-588
Zhai, Yanchun / Li, Yan / Liang, Sen	Free vibration analysis of five-layered composite sandwich plates with two-layered viscoelastic cores	346-357
Peeters, Mathijs / Santo, Gilberto / Degroote, Joris / Van Paepegem, Wim	High-fidelity finite element models of composite wind turbine blades with shell and solid elements	521-531
Kim, Sang-Woo / Jang, Hosung	Impact localization on a composite plate based on error outliers with Pugh’s concept selection	449-465
Liu, Hu / Yang, Jialing / Liu, Hua	Impact response of low-density foam impinging onto viscoelastic bar: A theoretical analysis	47-58
Fu, B. / Tang, X. T. / Li, L. J. / Liu, F. / Lin, G.	Inclined FRP U-jackets for enhancing structural performance of FRP-plated RC beams suffering from IC debonding	36-46
Berardi, V. P. / Feo, L. / Mancusi, G. / De Piano, M.	Influence of reinforcement viscous properties on reliability of existing structures strengthened with externally bonded composites	532-539
Narducci, F. / Pinho, S. T.	Interaction between nacre-like CFRP mesolayers and long-fibre interlayers	921-928
Lee, Hak Gu / Lee, Jungwan	Measurement theory of test bending moments for resonance-type fatigue testing of a full-scale wind turbine blade	306-312
Carpier, Y. / Vieille, B. / Maaroufi, M. A. / Coppalle, A. / Barbe, F.	Mechanical behavior of carbon fibers polyphenylene sulfide composites exposed to radiant heat flux and constant compressive force	1-11
Yan, Y. / Carrera, E. / de Miguel, A. G. / Pagani, A. / Ren, Q.-W.	Meshless analysis of metallic and composite beam structures by advanced hierarchical models with layer-wise capabilities	380-395
Cornejo, A. / Barbu, L. G. / Escudero, C. / Martinez, X. / Oller, S. / Barbat, A. H.	Methodology for the analysis of post-tensioned structures using a constitutive serial-parallel rule of mixtures	480-497
Koutsawa, Yao / Karatrantos, Argyrios / Yu, Wenbin / Ruch, David	A micromechanics approach for the effective thermal conductivity of composite materials with general linear imperfect interfaces	747-756
Tian, Fang / Zhong, Zheng / Pan, Yihui	Modeling of natural fiber reinforced composites under hygrothermal ageing	144-152
Grigoriou, K. / Mouritz, A. P.	Modelling and testing of fibre metal laminates and their constituent materials in fire	25-35
de Sousa, Bruno Silva / Gomes, Guilherme Ferreira / Jorge, Ariosto Bretanha / da Cunha, Sebastião Simões / Ancelotti, Antônio Carlos	A modified topological sensitivity analysis extended to the design of composite multidirectional laminates structures	729-746
Rai, Ashwin / Chattopadhyay, Aditi	Multifidelity multiscale modeling of nanocomposites for microstructure and macroscale analysis	204-216
El Said, Bassam / Hallett, Stephen R.	Multiscale surrogate modelling of the elastic response of thick composite structures with embedded defects and features	781-798
Barretta, R. / Fazelzadeh, S. A. / Feo, L. / Ghavanloo, E. / Luciano, R.	Nonlocal inflected nano-beams: A stress-driven approach of bi-Helmholtz type	239-245
Fan, Haifeng / Vassilopoulos, Anastasios P. / Keller, Thomas	Numerical and analytical investigation of tensile behavior of non-laminated and laminated CFRP straps	79-87
Kinvi-Dossou, G. / Matadi Boumbimba, R. / Bonfoh, N. / Koutsawa, Y. / Eccli, D. / Gérard, P.	A numerical homogenization of E-glass/acrylic woven composite laminates: Application to low velocity impact	540-554
D'Altri, Antonio Maria / Carloni, Christian / de Miranda, Stefano / Castellazzi, Giovanni	Numerical modeling of FRP strips bonded to a masonry substrate	420-433
Cameselle-Molares, Aida / Vassilopoulos, Anastasios P. / Renart, Jordi / Turon, Albert / Keller, Thomas	Numerical simulation of two-dimensional in-plane crack propagation in FRP laminates	396-407
Sabik, A.	Progressive failure analysis of laminates in the framework of 6-field non-linear shell theory	195-203
Wang, Yanlei / Wang, Yongshuai / Wan, Baolin / Han, Baoguo / Cai, Gaochuang / Li, Zhizheng	Properties and mechanisms of self-sensing carbon nanofibers/epoxy composites for structural health monitoring	669-678
Ascione, F. / Lamberti, M. / Razaqpur, A. G. / Spadea, S. / Malagic, M.	Pseudo-ductile failure of adhesively joined GFRP beam-column connections: An experimental and numerical investigation	864-873
Garulli, Torquato / Catapano, Anita / Montemurro, Marco / Jumel, Julien / Fanteria, Daniele	Quasi-trivial stacking sequences for the design of thick laminates	614-623
Yang, Wanli / He, Dan / Hu, Yuantai	A refined beam model for anisotropic nanobeams based on Eringen's differential constitutive model	771-780
Patel, Shivdayal / Guedes Soares, C.	Reliability assessment of glass epoxy composite plates due to low velocity impact	659-668
Wang, Gong-Dong / Melly, Stephen Kirwa / Li, Nan / Peng, Tian / Li, Yingchi	Research on milling strategies to reduce delamination damage during machining of holes in CFRP/Ti stack	679-688
Sutherland, L. S.	A review of impact testing on marine composite materials: Part IV – Scaling, strain rate and marine-type laminates	929-938
Khan, Muhammad Irfan / Al-Osta, Mohammed Ali / Ahmad, Shamsad / Rahman, Muhammad Kalimur	Seismic behavior of beam-column joints strengthened with ultra-high performance fiber reinforced concrete	103-119
Wu, Xiangguo / Kang, Thomas H.-K. / Lin, Yang / Hwang, Hyeon-Jong	Shear strength of reinforced concrete beams with precast High-Performance Fiber-Reinforced Cementitious Composite permanent form	829-838
Rotunno, Tommaso / Fagone, Mario / Bertolesi, Elisa / Grande, Ernesto / Milani, Gabriele	Single lap shear tests of masonry curved pillars externally strengthened by CFRP strips	434-448
Moradi-Dastjerdi, Rasool / Aghadavoudi, Farshid	Static analysis of functionally graded nanocomposite sandwich plates reinforced by defected CNT	839-848
Zhang, Shufeng / Wang, Hao / Zhang, Li / Chen, Xun	Statistical correlation between elastic properties of plain-weave composite and its influence on structure reliability	939-945
Mohammadi, Mohsen / Eghtesad, Mohammad / Mohammadi, Hossein	Stochastic analysis of pull-in instability of geometrically nonlinear size-dependent FGM micro beams with random material properties	466-479
Li, Yi / Chen, Zhangxing / Su, Lingxuan / Chen, Wei / Jin, Xuejun / Xu, Hongyi	Stochastic reconstruction and microstructure modeling of SMC chopped fiber composites	153-164
El Kouri, M. / Bakkali, A. / Azrar, L.	Straightforward mathematical modeling of the time-dependent behavior of non-ageing viscoelastic composites with multi-coated inclusions	689-700
Wang, Wenjie / Zhang, Xuejie / Chouw, Nawawi / Li, Zhongxian / Shi, Yanchao	Strain rate effect on the dynamic tensile behaviour of flax fibre reinforced polymer	135-143
Zeng, Jun-Jie / Guo, Yong-Chang / Gao, Wan-Yang / Chen, Wei-Peng / Li, Li-Juan	Stress-strain behavior of concrete in circular concrete columns partially wrapped with FRP strips	810-828
Vemuluri, Ramesh Babu / Rajamohan, Vasudevan / Sudhagar, P. Edwin	Structural optimization of tapered composite sandwich plates partially treated with magnetorheological elastomers	258-276
Heshmati, M. / Daneshmand, F.	A study on the vibrational properties of weight-efficient plates made of material with functionally graded porosity	229-238
Mariam, M. / Afendi, M. / Abdul Majid, M. S. / Ridzuan, M. J. M. / Gibson, A. G.	Tensile and fatigue properties of single lap joints of aluminium alloy/glass fibre reinforced composites fabricated with different joining methods	647-658
Jiang, Shiyong / Yao, Weilai / Chen, Jin / Tao, Shuai	Time dependent behavior of FRP-strengthened RC beams subjected to preload: Experimental study and finite element modeling	599-613
Wu, Peng / Hu, Chao / Qin, Qing-Hua	Time-dependent behavior of layered magneto-electro-elastic cylindrical shell with viscoelastic interlayer	874-885
Irshidat, Mohammad R. / Al-Shannaq, Ammar	Using textile reinforced mortar modified with carbon nano tubes to improve flexural performance of RC beams	127-134
Capozucca, R.	Vibration analysis of damaged RC beams strengthened with GFRP	624-634
Wang, Miao / Li, Zhi-Min / Qiao, Pizhong	Vibration analysis of sandwich plates with carbon nanotube-reinforced composite face-sheets	799-809
Ghayesh, Mergen H.	Vibration analysis of shear-deformable AFG imperfect beams	910-920

Über diese
Datenseite
IssueID
37788
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - September 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - September 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.