Composite Structures - October 2018

Published:	October 2018

Articles in this Issue

Author(s)	Title	Page(s)
Ye, Jinxin / Yan, Ying / Li, Jie / Hong, Yang / Tian, Ziyang	3D explicit finite element analysis of tensile failure behavior in adhesive-bonded composite single-lap joints	261-275
Wu, Zhangming / Li, Hao / Friswell, Michael I.	Advanced nonlinear dynamic modelling of bi-stable composite plates	582-596
Kurzawa, Adam / Pyka, Dariusz / Jamroziak, Krzysztof / Bocian, Miroslaw / Kotowski, Piotr / Widomski, Pawel	Analysis of ballistic resistance of composites based on EN AC-44200 aluminum alloy reinforced with Al2O3 particles	834-844
Katunin, Andrzej / Wachla, Dominik	Analysis of defect detectability in polymeric composites using self-heating based vibrothermography	760-765
Dias, S. J. E. / Barros, J. A. O. / Janwaen, W.	Behavior of RC beams flexurally strengthened with NSM CFRP laminates	363-376
Vadalà, F. / Bacigalupo, A. / Lepidi, M. / Gambarotta, L.	Bloch wave filtering in tetrachiral materials via mechanical tuning	340-351
Zhang, S. S.	Bond strength model for near-surface mounted (NSM) FRP bonded joints: Effect of concrete edge distance	664-675
Feng, Li-Jia / Yang, Zhi-Tao / Yu, Guo-Cai / Chen, Xiao-Jian / Wu, Lin-Zhi	Compressive and shear properties of carbon fiber composite square honeycombs with optimized high-modulus hierarchical phases	845-856
Yang, Yabin / Zeng, Pan	A computationally efficient model to predict the uniaxial tensile loading response for dry woven fabrics	434-445
Chen, Peng / Wang, Yuyin / Liu, Changyong	Confinement path-dependent analytical model for FRP-confined concrete and concrete-filled steel tube subjected to axial compression	234-247
Yu, Xuehui / Qin, Qinghua / Zhang, Jianxun / He, Siyuan / Xiang, Chunping / Wang, Mingshi / Wang, T. J.	Crushing and energy absorption of density-graded foam-filled square columns: Experimental and theoretical investigations	423-433
Sherif, Muhammad M. / Khakimova, Evelina M. / Tanks, Jonathon / Ozbulut, Osman E.	Cyclic flexural behavior of hybrid SMA/steel fiber reinforced concrete analyzed by optical and acoustic techniques	248-260
Li, Pengda / Wu, Yu-Fei / Zhou, Yingwu / Xing, Feng	Cyclic stress-strain model for FRP-confined concrete considering post-peak softening	902-915
Xie, Shuai / Ji, Zhijiang / Shui, Zhonghe / Li, Bin / Wang, Jing / Hou, Guoyan / Wang, Jimei	Design and manufacture of a dual-functional exterior wall structure for 1.1–5 GHz electromagnetic radiation absorption	608-615
Falope, F. O. / Lanzoni, L. / Tarantino, A. M.	Double lap shear test on steel fabric reinforced cementitious matrix (SFRCM)	503-513
On, Seung Yoon / Kim, Yun Seong / You, Jun Il / Lim, Jun Woo / Kim, Seong Su	Dynamic characteristics of composite tilting pad journal bearing for turbine/generator applications	747-759
Zheng, Baojing / Yang, Yang / Gao, Xiaowei / Zhang, Ch.	Dynamic fracture analysis of functionally graded materials under thermal shock loading by using the radial integration boundary element method	468-476
Akbari, Ahmad / Bagri, Akbar / Natarajan, Sundararajan	Dynamic response of viscoelastic functionally graded hollow cylinder subjected to thermo-mechanical loads	414-422
Tornabene, Francesco / Bacciocchi, Michele	Dynamic stability of doubly-curved multilayered shells subjected to arbitrarily oriented angular velocities: Numerical evaluation of the critical speed	1031-1055
Al-shujairi, Mohammed / Mollamahmutoğlu, Çağrı	Dynamic stability of sandwich functionally graded micro-beam based on the nonlocal strain gradient theory with thermal effect	1018-1030
Ghalami-Choobar, Mehran / Liaghat, Gholamhossein / Sadighi, Mojtaba / Ahmadi, Hamed	Eccentric low-velocity impact on fiber-metal laminates under in-plane loading using unified zigzag theory	315-325
Cao, Y. Y. Y. / Yu, Q. L.	Effect of inclination angle on hooked end steel fiber pullout behavior in ultra-high performance concrete	151-160
Arkhurst, Barton Mensah / Lee, Mokyoung / Kim, Jeoung Han	Effect of resin matrix on the strength of an AZ31 Mg alloy-CFRP joint made by the hot metal pressing technique	303-314
Abu Tahnat, Yazan B. / Dwaikat, Mahmud M. S. / Samaaneh, Mohammad A.	Effect of using CFRP wraps on the strength and ductility behaviors of exterior reinforced concrete joint	721-739
Choe, Jongchol / Huang, Qun / Yang, Jie / Hu, Heng	An efficient approach to investigate the post-buckling behaviors of sandwich structures	377-388
Ud Din, I. / Hao, P. / Franz, G. / Panier, S.	Elastoplastic CDM model based on Puck’s theory for the prediction of mechanical behavior of Fiber Reinforced Polymer (FRP) composites	291-302
Song, Jian / Wen, Weidong / Cui, Haitao	Experimental and numerical investigation of mechanical behaviors of 2.5D woven composites at ambient and un-ambient temperatures	699-720
Qi, Liangjie / Xue, Jianyang / Zhai, Lei / Zhao, Xuan / leon, Roberto T.	Experimental and numerical studies on seismic performance of traditional style steel-concrete composite frame	514-527
Alshurafa, Sami A. / Polyzois, Dimos	An experimental and numerical study into the development of FRP guyed towers	779-790
Bai, Yunhe / Yu, Kaiping / Zhao, Jie / Zhao, Rui	Experimental and simulation investigation of temperature effects on modal characteristics of composite honeycomb structure	816-827
Woigk, Wilhelm / Hallett, Stephen R. / Jones, Mike I. / Kuhtz, Moritz / Hornig, Andreas / Gude, Maik	Experimental investigation of the effect of defects in Automated Fibre Placement produced composite laminates	1004-1017
Mei, Kuihua / Sun, Shengjiang / Li, Bo / Sun, Yamin / Jin, Guoqing	Experimental investigation on the mechanical properties of a bond-type anchor for carbon fiber reinforced polymer tendons	193-199
Gribniak, Viktor / Rimkus, Arvydas / Torres, Lluis / Hui, David	An experimental study on cracking and deformations of tensile concrete elements reinforced with multiple GFRP bars	477-485
Gong, Yu / Zhang, Bing / Mukhopadhyay, Supratik / Hallett, Stephen R.	Experimental study on delamination migration in multidirectional laminates under mode II static and fatigue loading, with comparison to mode I	683-698
Khoramishad, H. / Alikhani, H. / Dariushi, S.	An experimental study on the effect of adding multi-walled carbon nanotubes on high-velocity impact behavior of fiber metal laminates	561-569
Milazzo, A. / Benedetti, I. / Gulizzi, V.	An extended Ritz formulation for buckling and post-buckling analysis of cracked multilayered plates	980-994
Kang, Kyoung-Tak / Son, Juhyun / Kwon, Sae Kwang / Kwon, Oh-Ryong / Park, Joon-Hee / Koh, Yong-Gon	Finite element analysis for the biomechanical effect of tibial insert materials in total knee arthroplasty	141-150
Zhu, Zewen / Zhu, Eryu	Flexural behavior of large-size RC beams strengthened with side near surface mounted (SNSM) CFRP strips	178-192
Arefi, Azam / van der Meer, Frans P. / Forouzan, Mohammad Reza / Silani, Mohammad	Formulation of a consistent pressure-dependent damage model with fracture energy as input	208-216
Wakjira, Tadesse G. / Ebead, Usama	FRCM/internal transverse shear reinforcement interaction in shear strengthened RC beams	326-339
Li, Haichao / Pang, Fuzhen / Wang, Xueren / Du, Yuan / Chen, Hailong	Free vibration analysis for composite laminated doubly-curved shells of revolution by a semi analytical method	86-111
Lopatin, A. V. / Morozov, E. V. / Shatov, A. V.	Fundamental frequency of a composite anisogrid lattice cylindrical panel with clamped edges	200-207
Montemurro, Marco / Pagani, Alfonso / Fiordilino, Giacinto Alberto / Pailhès, Jérôme / Carrera, Erasmo	A general multi-scale two-level optimisation strategy for designing composite stiffened panels	968-979
Ogierman, Witold / Kokot, Grzegorz	Generation of the representative volume elements of composite materials with misaligned inclusions	636-646
Jarząbek, Dariusz M.	The impact of weak interfacial bonding strength on mechanical properties of metal matrix – Ceramic reinforced composites	352-362
Saafi, M. / Gullane, A. / Huang, B. / Sadeghi, H. / Ye, J. / Sadeghi, F.	Inherently multifunctional geopolymeric cementitious composite as electrical energy storage and self-sensing structural material	766-778
Zeng, Jun-Jie / Gao, Wan-Yang / Liu, Feng	Interfacial behavior and debonding failures of full-scale CFRP-strengthened H-section steel beams	540-552
Lin, Yanyan / Liu, Cheng / Li, Huaguan / Jin, Kai / Tao, Jie	Interlaminar failure behavior of GLARE laminates under double beam five-point-bending load	79-85
Yin, Sha / Chen, Haoyu / Wu, Yaobo / Li, Yibing / Xu, Jun	Introducing composite lattice core sandwich structure as an alternative proposal for engine hood	131-140
Shi, Taibai / Chen, Wujun / Gao, Chengjun / Hu, Jianhui / Zhao, Bing / Wang, Xueming / Wang, Xique / Lu, Guofu	Investigation of mechanical behavior of weld seams of composite envelopes in airship structures	1-12
Heidary, Hossein / Karimi, Navid Zarif / Minak, Giangiacomo	Investigation on delamination and flexural properties in drilling of carbon nanotube/polymer composites	112-120
Zhang, Chao / Curiel-Sosa, J. L. / Bui, Tinh Quoc	Meso-scale progressive damage modeling and life prediction of 3D braided composites under fatigue tension loading	62-71
Bertolesi, Elisa / Milani, Gabriele / Fagone, Mario / Rotunno, Tommaso / Grande, Ernesto	Micro-mechanical FE numerical model for masonry curved pillars reinforced with FRP strips subjected to single lap shear tests	916-931
Majak, J. / Pohlak, M. / Karjust, K. / Eerme, M. / Kurnitski, J. / Shvartsman, B. S.	New higher order Haar wavelet method: Application to FGM structures	72-78
Qu, Peng / Wan, Yi / Bao, Chunjiang / Sun, Qun / Fang, Guangqiang / Takahashi, Jun	A new numerical method for the mechanical analysis of chopped carbon fiber tape-reinforced thermoplastics	857-866
Phung-Van, P. / Thanh, Cuong-Le / Nguyen-Xuan, H. / Abdel-Wahab, M.	Nonlinear transient isogeometric analysis of FG-CNTRC nanoplates in thermal environments	882-892
Lu, Qingqing / Liu, Liwu / Scarpa, Fabrizio / Leng, Jinsong / Liu, Yanju	A novel composite multi-layer piezoelectric energy harvester	121-130
Karimi, Majid / Ghajar, Rahmatollah / Montazeri, Abbas	A novel interface-treated micromechanics approach for accurate and efficient modeling of CNT/polymer composites	528-539
Beringhier, M. / Djato, A. / Maida, D. / Gigliotti, M.	A novel protocol for rapid identification of anisotropic diffusion properties of polymer matrix composite materials with complex texture	1088-1096
Xie, Hang / Ren, Huilong / Qu, Sen / Tang, Haoyun	Numerical and experimental study on hydroelasticity in water-entry problem of a composite ship-hull structure	942-957
Gao, Jianhong / Yang, Xiaoxiang / Huang, LiHong	Numerical prediction of mechanical properties of rubber composites reinforced by aramid fiber under large deformation	29-37
Herwig, T. / Wagner, W.	On a robust FE2 model for delamination analysis in composite structures	597-607
Sun, Guangyong / Liu, Xinglong / Zheng, Gang / Gong, Zhihui / Li, Qing	On fracture characteristics of adhesive joints with dissimilar materials – An experimental study using digital image correlation (DIC) technique	1056-1075
Pitta, Siddharth / de la Mora Carles, Victor / Roure, Francesc / Crespo, Daniel / Rojas, Jose I.	On the static strength of aluminium and carbon fibre aircraft lap joint repairs	276-290
Wang, Zhenzhou / Bai, Jiangbo / Sobey, Adam / Xiong, Junjiang / Shenoi, Ajit	Optimal design of triaxial weave fabric composites under tension	616-624
Wang, Zhen-Pei / Poh, Leong Hien	Optimal form and size characterization of planar isotropic petal-shaped auxetics with tunable effective properties using IGA	486-502
Chen, S. / McGregor, O. P. L. / Harper, L. T. / Endruweit, A. / Warrior, N. A.	Optimisation of local in-plane constraining forces in double diaphragm forming	570-581
Maragoni, L. / Carraro, P. A. / Quaresimin, M.	Periodic boundary conditions for FE analyses of a representative volume element for composite laminates with one cracked ply and delaminations	932-941
Filipovic, D. T. / Kress, G. R.	A planar finite element formulation for corrugated laminates under transverse shear loading	958-967
Hajiloo, Hamzeh / Green, Mark F.	Post-fire residual properties of GFRP reinforced concrete slabs: A holistic investigation	398-413
Thai, Son / Thai, Huu-Tai / Vo, Thuc P. / Lee, Seunghye	Postbuckling analysis of functionally graded nanoplates based on nonlocal theory and isogeometric analysis	13-20
Zenkour, Ashraf M.	A quasi-3D refined theory for functionally graded single-layered and sandwich plates with porosities	38-48
Shaat, Mohamed	A reduced micromorphic model for multiscale materials and its applications in wave propagation	446-454
Kubit, Andrzej / Wydrzynski, Dawid / Trzepiecinski, Tomasz	Refill friction stir spot welding of 7075-T6 aluminium alloy single-lap joints with polymer sealant interlayer	389-397
Palomar, Marta / Lozano-Mínguez, Estívaliz / Rodríguez-Millán, Marcos / Miguélez, María Henar / Giner, Eugenio	Relevant factors in the design of composite ballistic helmets	49-61
Teklal, Fatiha / Djebbar, Arezki / Allaoui, Samir / Hivet, Gilles / Joliff, Yoann / Kacimi, Bachir	A review of analytical models to describe pull-out behavior – Fiber/matrix adhesion	791-815
Zhang, Hong / Shi, Dongyan / Zha, Shuai / Wang, Qingshan	A simple first-order shear deformation theory for vibro-acoustic analysis of the laminated rectangular fluid-structure coupling system	647-663
Xu, Hui / Zu, Lei / Zhang, Bing / You, Houfeng / Li, Debao / Wang, Huabi / Zi, Bin	Static and dynamic bending behaviors of carbon fiber reinforced composite cantilever cylinders	893-901
Yang, Yikun / Niu, Muqing / Yang, Bintang	Static nonlinear model of both ends clamped magnetoelectric heterostructures with fully magneto-mechanical coupling	625-635
Leite, Luiz Fernando Martins / Leite, Bruno Martins / Reis, Vitor Luiz / Alves da Silveira, Nubia Nale / Donadon, Maurício Vicente	Strain rate effects on the intralaminar fracture toughness of composite laminates subjected to tensile load	455-467
Wang, Kangkang / Zhao, Libin / Hong, Haiming / Zhang, Jianyu	A strain-rate-dependent damage model for evaluating the low velocity impact induced damage of composite laminates	995-1003
Xu, Jinyang / Li, Chao / Mi, Sipei / An, Qinglong / Chen, Ming	Study of drilling-induced defects for CFRP composites using new criteria	1076-1087
Alebrahim, Reza / Sharifishourabi, G. / Sharifi, S. / Alebrahim, Mahdi / Zhang, Haifeng / Yahya, Y. / Ayob, Amran.	Thermo-mechanical behaviour of smart composite beam under quasi-static loading	21-28
Ye, Tiangui / Jin, Guoyong / Gao, Siyang	Three-dimensional hygrothermal vibration of multilayered cylindrical shells	867-881
Paczos, Piotr / Wichniarek, Radoslaw / Magnucki, Krzysztof	Three-point bending of sandwich beam with special structure of the core	676-682
Kostic, Sanja / Merk, Vivian / Berg, John K. / Hass, Philipp / Burgert, Ingo / Cabane, Etienne	Timber-mortar composites: The effect of sol-gel surface modification on the wood-adhesive interface	828-833
Lee, Jaewook / Kim, Dongjin / Nomura, Tsuyoshi / Dede, Ercan M. / Yoo, Jeonghoon	Topology optimization for continuous and discrete orientation design of functionally graded fiber-reinforced composite structures	217-233
Yang, Xiongwei / Kim, Yoon Young	Topology optimization for the design of perfect mode-converting anisotropic elastic metamaterials	161-177
Liu, Fuchu / Jiang, Peng / Huang, Ying / Jiang, Wenming / Liu, Xinwang / Fan, Zitian	A water-soluble magnesium sulfate bonded sand core material for manufacturing hollow composite castings	553-560
Ma, Yongbin / Zhang, Kai / Deng, Zichen	Wave component solutions of free vibration and mode damping loss factor of finite length periodic beam structure with damping material	740-746

About this
data sheet
IssueID
37787
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - October 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - October 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.