Composite Structures - Oktober 2018

Erschienen:	Oktober 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Ye, Jinxin / Yan, Ying / Li, Jie / Hong, Yang / Tian, Ziyang	3D explicit finite element analysis of tensile failure behavior in adhesive-bonded composite single-lap joints	261-275
Wu, Zhangming / Li, Hao / Friswell, Michael I.	Advanced nonlinear dynamic modelling of bi-stable composite plates	582-596
Kurzawa, Adam / Pyka, Dariusz / Jamroziak, Krzysztof / Bocian, Miroslaw / Kotowski, Piotr / Widomski, Pawel	Analysis of ballistic resistance of composites based on EN AC-44200 aluminum alloy reinforced with Al2O3 particles	834-844
Katunin, Andrzej / Wachla, Dominik	Analysis of defect detectability in polymeric composites using self-heating based vibrothermography	760-765
Dias, S. J. E. / Barros, J. A. O. / Janwaen, W.	Behavior of RC beams flexurally strengthened with NSM CFRP laminates	363-376
Vadalà, F. / Bacigalupo, A. / Lepidi, M. / Gambarotta, L.	Bloch wave filtering in tetrachiral materials via mechanical tuning	340-351
Zhang, S. S.	Bond strength model for near-surface mounted (NSM) FRP bonded joints: Effect of concrete edge distance	664-675
Feng, Li-Jia / Yang, Zhi-Tao / Yu, Guo-Cai / Chen, Xiao-Jian / Wu, Lin-Zhi	Compressive and shear properties of carbon fiber composite square honeycombs with optimized high-modulus hierarchical phases	845-856
Yang, Yabin / Zeng, Pan	A computationally efficient model to predict the uniaxial tensile loading response for dry woven fabrics	434-445
Chen, Peng / Wang, Yuyin / Liu, Changyong	Confinement path-dependent analytical model for FRP-confined concrete and concrete-filled steel tube subjected to axial compression	234-247
Yu, Xuehui / Qin, Qinghua / Zhang, Jianxun / He, Siyuan / Xiang, Chunping / Wang, Mingshi / Wang, T. J.	Crushing and energy absorption of density-graded foam-filled square columns: Experimental and theoretical investigations	423-433
Sherif, Muhammad M. / Khakimova, Evelina M. / Tanks, Jonathon / Ozbulut, Osman E.	Cyclic flexural behavior of hybrid SMA/steel fiber reinforced concrete analyzed by optical and acoustic techniques	248-260
Li, Pengda / Wu, Yu-Fei / Zhou, Yingwu / Xing, Feng	Cyclic stress-strain model for FRP-confined concrete considering post-peak softening	902-915
Xie, Shuai / Ji, Zhijiang / Shui, Zhonghe / Li, Bin / Wang, Jing / Hou, Guoyan / Wang, Jimei	Design and manufacture of a dual-functional exterior wall structure for 1.1–5 GHz electromagnetic radiation absorption	608-615
Falope, F. O. / Lanzoni, L. / Tarantino, A. M.	Double lap shear test on steel fabric reinforced cementitious matrix (SFRCM)	503-513
On, Seung Yoon / Kim, Yun Seong / You, Jun Il / Lim, Jun Woo / Kim, Seong Su	Dynamic characteristics of composite tilting pad journal bearing for turbine/generator applications	747-759
Zheng, Baojing / Yang, Yang / Gao, Xiaowei / Zhang, Ch.	Dynamic fracture analysis of functionally graded materials under thermal shock loading by using the radial integration boundary element method	468-476
Akbari, Ahmad / Bagri, Akbar / Natarajan, Sundararajan	Dynamic response of viscoelastic functionally graded hollow cylinder subjected to thermo-mechanical loads	414-422
Tornabene, Francesco / Bacciocchi, Michele	Dynamic stability of doubly-curved multilayered shells subjected to arbitrarily oriented angular velocities: Numerical evaluation of the critical speed	1031-1055
Al-shujairi, Mohammed / Mollamahmutoğlu, Çağrı	Dynamic stability of sandwich functionally graded micro-beam based on the nonlocal strain gradient theory with thermal effect	1018-1030
Ghalami-Choobar, Mehran / Liaghat, Gholamhossein / Sadighi, Mojtaba / Ahmadi, Hamed	Eccentric low-velocity impact on fiber-metal laminates under in-plane loading using unified zigzag theory	315-325
Cao, Y. Y. Y. / Yu, Q. L.	Effect of inclination angle on hooked end steel fiber pullout behavior in ultra-high performance concrete	151-160
Arkhurst, Barton Mensah / Lee, Mokyoung / Kim, Jeoung Han	Effect of resin matrix on the strength of an AZ31 Mg alloy-CFRP joint made by the hot metal pressing technique	303-314
Abu Tahnat, Yazan B. / Dwaikat, Mahmud M. S. / Samaaneh, Mohammad A.	Effect of using CFRP wraps on the strength and ductility behaviors of exterior reinforced concrete joint	721-739
Choe, Jongchol / Huang, Qun / Yang, Jie / Hu, Heng	An efficient approach to investigate the post-buckling behaviors of sandwich structures	377-388
Ud Din, I. / Hao, P. / Franz, G. / Panier, S.	Elastoplastic CDM model based on Puck’s theory for the prediction of mechanical behavior of Fiber Reinforced Polymer (FRP) composites	291-302
Song, Jian / Wen, Weidong / Cui, Haitao	Experimental and numerical investigation of mechanical behaviors of 2.5D woven composites at ambient and un-ambient temperatures	699-720
Qi, Liangjie / Xue, Jianyang / Zhai, Lei / Zhao, Xuan / leon, Roberto T.	Experimental and numerical studies on seismic performance of traditional style steel-concrete composite frame	514-527
Alshurafa, Sami A. / Polyzois, Dimos	An experimental and numerical study into the development of FRP guyed towers	779-790
Bai, Yunhe / Yu, Kaiping / Zhao, Jie / Zhao, Rui	Experimental and simulation investigation of temperature effects on modal characteristics of composite honeycomb structure	816-827
Woigk, Wilhelm / Hallett, Stephen R. / Jones, Mike I. / Kuhtz, Moritz / Hornig, Andreas / Gude, Maik	Experimental investigation of the effect of defects in Automated Fibre Placement produced composite laminates	1004-1017
Mei, Kuihua / Sun, Shengjiang / Li, Bo / Sun, Yamin / Jin, Guoqing	Experimental investigation on the mechanical properties of a bond-type anchor for carbon fiber reinforced polymer tendons	193-199
Gribniak, Viktor / Rimkus, Arvydas / Torres, Lluis / Hui, David	An experimental study on cracking and deformations of tensile concrete elements reinforced with multiple GFRP bars	477-485
Gong, Yu / Zhang, Bing / Mukhopadhyay, Supratik / Hallett, Stephen R.	Experimental study on delamination migration in multidirectional laminates under mode II static and fatigue loading, with comparison to mode I	683-698
Khoramishad, H. / Alikhani, H. / Dariushi, S.	An experimental study on the effect of adding multi-walled carbon nanotubes on high-velocity impact behavior of fiber metal laminates	561-569
Milazzo, A. / Benedetti, I. / Gulizzi, V.	An extended Ritz formulation for buckling and post-buckling analysis of cracked multilayered plates	980-994
Kang, Kyoung-Tak / Son, Juhyun / Kwon, Sae Kwang / Kwon, Oh-Ryong / Park, Joon-Hee / Koh, Yong-Gon	Finite element analysis for the biomechanical effect of tibial insert materials in total knee arthroplasty	141-150
Zhu, Zewen / Zhu, Eryu	Flexural behavior of large-size RC beams strengthened with side near surface mounted (SNSM) CFRP strips	178-192
Arefi, Azam / van der Meer, Frans P. / Forouzan, Mohammad Reza / Silani, Mohammad	Formulation of a consistent pressure-dependent damage model with fracture energy as input	208-216
Wakjira, Tadesse G. / Ebead, Usama	FRCM/internal transverse shear reinforcement interaction in shear strengthened RC beams	326-339
Li, Haichao / Pang, Fuzhen / Wang, Xueren / Du, Yuan / Chen, Hailong	Free vibration analysis for composite laminated doubly-curved shells of revolution by a semi analytical method	86-111
Lopatin, A. V. / Morozov, E. V. / Shatov, A. V.	Fundamental frequency of a composite anisogrid lattice cylindrical panel with clamped edges	200-207
Montemurro, Marco / Pagani, Alfonso / Fiordilino, Giacinto Alberto / Pailhès, Jérôme / Carrera, Erasmo	A general multi-scale two-level optimisation strategy for designing composite stiffened panels	968-979
Ogierman, Witold / Kokot, Grzegorz	Generation of the representative volume elements of composite materials with misaligned inclusions	636-646
Jarząbek, Dariusz M.	The impact of weak interfacial bonding strength on mechanical properties of metal matrix – Ceramic reinforced composites	352-362
Saafi, M. / Gullane, A. / Huang, B. / Sadeghi, H. / Ye, J. / Sadeghi, F.	Inherently multifunctional geopolymeric cementitious composite as electrical energy storage and self-sensing structural material	766-778
Zeng, Jun-Jie / Gao, Wan-Yang / Liu, Feng	Interfacial behavior and debonding failures of full-scale CFRP-strengthened H-section steel beams	540-552
Lin, Yanyan / Liu, Cheng / Li, Huaguan / Jin, Kai / Tao, Jie	Interlaminar failure behavior of GLARE laminates under double beam five-point-bending load	79-85
Yin, Sha / Chen, Haoyu / Wu, Yaobo / Li, Yibing / Xu, Jun	Introducing composite lattice core sandwich structure as an alternative proposal for engine hood	131-140
Shi, Taibai / Chen, Wujun / Gao, Chengjun / Hu, Jianhui / Zhao, Bing / Wang, Xueming / Wang, Xique / Lu, Guofu	Investigation of mechanical behavior of weld seams of composite envelopes in airship structures	1-12
Heidary, Hossein / Karimi, Navid Zarif / Minak, Giangiacomo	Investigation on delamination and flexural properties in drilling of carbon nanotube/polymer composites	112-120
Zhang, Chao / Curiel-Sosa, J. L. / Bui, Tinh Quoc	Meso-scale progressive damage modeling and life prediction of 3D braided composites under fatigue tension loading	62-71
Bertolesi, Elisa / Milani, Gabriele / Fagone, Mario / Rotunno, Tommaso / Grande, Ernesto	Micro-mechanical FE numerical model for masonry curved pillars reinforced with FRP strips subjected to single lap shear tests	916-931
Majak, J. / Pohlak, M. / Karjust, K. / Eerme, M. / Kurnitski, J. / Shvartsman, B. S.	New higher order Haar wavelet method: Application to FGM structures	72-78
Qu, Peng / Wan, Yi / Bao, Chunjiang / Sun, Qun / Fang, Guangqiang / Takahashi, Jun	A new numerical method for the mechanical analysis of chopped carbon fiber tape-reinforced thermoplastics	857-866
Phung-Van, P. / Thanh, Cuong-Le / Nguyen-Xuan, H. / Abdel-Wahab, M.	Nonlinear transient isogeometric analysis of FG-CNTRC nanoplates in thermal environments	882-892
Lu, Qingqing / Liu, Liwu / Scarpa, Fabrizio / Leng, Jinsong / Liu, Yanju	A novel composite multi-layer piezoelectric energy harvester	121-130
Karimi, Majid / Ghajar, Rahmatollah / Montazeri, Abbas	A novel interface-treated micromechanics approach for accurate and efficient modeling of CNT/polymer composites	528-539
Beringhier, M. / Djato, A. / Maida, D. / Gigliotti, M.	A novel protocol for rapid identification of anisotropic diffusion properties of polymer matrix composite materials with complex texture	1088-1096
Xie, Hang / Ren, Huilong / Qu, Sen / Tang, Haoyun	Numerical and experimental study on hydroelasticity in water-entry problem of a composite ship-hull structure	942-957
Gao, Jianhong / Yang, Xiaoxiang / Huang, LiHong	Numerical prediction of mechanical properties of rubber composites reinforced by aramid fiber under large deformation	29-37
Herwig, T. / Wagner, W.	On a robust FE2 model for delamination analysis in composite structures	597-607
Sun, Guangyong / Liu, Xinglong / Zheng, Gang / Gong, Zhihui / Li, Qing	On fracture characteristics of adhesive joints with dissimilar materials – An experimental study using digital image correlation (DIC) technique	1056-1075
Pitta, Siddharth / de la Mora Carles, Victor / Roure, Francesc / Crespo, Daniel / Rojas, Jose I.	On the static strength of aluminium and carbon fibre aircraft lap joint repairs	276-290
Wang, Zhenzhou / Bai, Jiangbo / Sobey, Adam / Xiong, Junjiang / Shenoi, Ajit	Optimal design of triaxial weave fabric composites under tension	616-624
Wang, Zhen-Pei / Poh, Leong Hien	Optimal form and size characterization of planar isotropic petal-shaped auxetics with tunable effective properties using IGA	486-502
Chen, S. / McGregor, O. P. L. / Harper, L. T. / Endruweit, A. / Warrior, N. A.	Optimisation of local in-plane constraining forces in double diaphragm forming	570-581
Maragoni, L. / Carraro, P. A. / Quaresimin, M.	Periodic boundary conditions for FE analyses of a representative volume element for composite laminates with one cracked ply and delaminations	932-941
Filipovic, D. T. / Kress, G. R.	A planar finite element formulation for corrugated laminates under transverse shear loading	958-967
Hajiloo, Hamzeh / Green, Mark F.	Post-fire residual properties of GFRP reinforced concrete slabs: A holistic investigation	398-413
Thai, Son / Thai, Huu-Tai / Vo, Thuc P. / Lee, Seunghye	Postbuckling analysis of functionally graded nanoplates based on nonlocal theory and isogeometric analysis	13-20
Zenkour, Ashraf M.	A quasi-3D refined theory for functionally graded single-layered and sandwich plates with porosities	38-48
Shaat, Mohamed	A reduced micromorphic model for multiscale materials and its applications in wave propagation	446-454
Kubit, Andrzej / Wydrzynski, Dawid / Trzepiecinski, Tomasz	Refill friction stir spot welding of 7075-T6 aluminium alloy single-lap joints with polymer sealant interlayer	389-397
Palomar, Marta / Lozano-Mínguez, Estívaliz / Rodríguez-Millán, Marcos / Miguélez, María Henar / Giner, Eugenio	Relevant factors in the design of composite ballistic helmets	49-61
Teklal, Fatiha / Djebbar, Arezki / Allaoui, Samir / Hivet, Gilles / Joliff, Yoann / Kacimi, Bachir	A review of analytical models to describe pull-out behavior – Fiber/matrix adhesion	791-815
Zhang, Hong / Shi, Dongyan / Zha, Shuai / Wang, Qingshan	A simple first-order shear deformation theory for vibro-acoustic analysis of the laminated rectangular fluid-structure coupling system	647-663
Xu, Hui / Zu, Lei / Zhang, Bing / You, Houfeng / Li, Debao / Wang, Huabi / Zi, Bin	Static and dynamic bending behaviors of carbon fiber reinforced composite cantilever cylinders	893-901
Yang, Yikun / Niu, Muqing / Yang, Bintang	Static nonlinear model of both ends clamped magnetoelectric heterostructures with fully magneto-mechanical coupling	625-635
Leite, Luiz Fernando Martins / Leite, Bruno Martins / Reis, Vitor Luiz / Alves da Silveira, Nubia Nale / Donadon, Maurício Vicente	Strain rate effects on the intralaminar fracture toughness of composite laminates subjected to tensile load	455-467
Wang, Kangkang / Zhao, Libin / Hong, Haiming / Zhang, Jianyu	A strain-rate-dependent damage model for evaluating the low velocity impact induced damage of composite laminates	995-1003
Xu, Jinyang / Li, Chao / Mi, Sipei / An, Qinglong / Chen, Ming	Study of drilling-induced defects for CFRP composites using new criteria	1076-1087
Alebrahim, Reza / Sharifishourabi, G. / Sharifi, S. / Alebrahim, Mahdi / Zhang, Haifeng / Yahya, Y. / Ayob, Amran.	Thermo-mechanical behaviour of smart composite beam under quasi-static loading	21-28
Ye, Tiangui / Jin, Guoyong / Gao, Siyang	Three-dimensional hygrothermal vibration of multilayered cylindrical shells	867-881
Paczos, Piotr / Wichniarek, Radoslaw / Magnucki, Krzysztof	Three-point bending of sandwich beam with special structure of the core	676-682
Kostic, Sanja / Merk, Vivian / Berg, John K. / Hass, Philipp / Burgert, Ingo / Cabane, Etienne	Timber-mortar composites: The effect of sol-gel surface modification on the wood-adhesive interface	828-833
Lee, Jaewook / Kim, Dongjin / Nomura, Tsuyoshi / Dede, Ercan M. / Yoo, Jeonghoon	Topology optimization for continuous and discrete orientation design of functionally graded fiber-reinforced composite structures	217-233
Yang, Xiongwei / Kim, Yoon Young	Topology optimization for the design of perfect mode-converting anisotropic elastic metamaterials	161-177
Liu, Fuchu / Jiang, Peng / Huang, Ying / Jiang, Wenming / Liu, Xinwang / Fan, Zitian	A water-soluble magnesium sulfate bonded sand core material for manufacturing hollow composite castings	553-560
Ma, Yongbin / Zhang, Kai / Deng, Zichen	Wave component solutions of free vibration and mode damping loss factor of finite length periodic beam structure with damping material	740-746

Über diese
Datenseite
IssueID
37787
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - Oktober 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Oktober 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.