Composite Structures - November 2018

Published:	November 2018

Articles in this Issue

Author(s)	Title	Page(s)
Guinovart-Sanjuán, D. / Vajravelu, K. / Rodriguez-Ramos, R. / Guinovart-Diaz, R. / Bravo-Castillero, J. / Lebon, F. / Sabina, F. J.	Analysis of effective elastic properties for shell with complex geometrical shapes	278-285
Moure, M. M. / Rubio, I. / Aranda-Ruiz, J. / Loya, J. A. / Rodríguez-Millán, M.	Analysis of impact energy absorption by lightweight aramid structures	917-926
Viet, N. V. / Zaki, W. / Umer, R.	Analytical model of functionally graded material/shape memory alloy composite cantilever beam under bending	764-776
Gąsior, Paweł / Malesa, Marcin / Kaleta, Jerzy / Kujawińska, Małgorzata / Malowany, Krzysztof / Rybczyński, Radosław	Application of complementary optical methods for strain investigation in composite high pressure vessel	718-724
Wronkowicz, Angelika / Dragan, Krzysztof / Lis, Krzysztof	Assessment of uncertainty in damage evaluation by ultrasonic testing of composite structures	71-84
Li, Jun / Wu, Chengqing / Hao, Hong / Liu, Zhongxian / Yang, Yekai	Basalt scale-reinforced aluminium foam under static and dynamic loads	599-613
Hartanto, David / Hamed, Ehab / Agarwal, Ankit / Foster, Stephen J.	Behaviour of steel-CFRP lap joints under hygrothermal cycles and sustained loadings	740-749
Teng, Xiangyu / Chen, Wanqun / Huo, Dehong / Shyha, Islam / Lin, Chao	Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites	636-647
Lautenschläger, Miriam I. / Mayer, Lukas / Gebauer, Julian / Weidenmann, Kay A. / Henning, Frank / Elsner, Peter	Comparison of filler-dependent mechanical properties of jute fiber reinforced sheet and bulk molding compound	960-967
Sun, X. C. / Kawashita, L. F. / Kaddour, A. S. / Hiley, M. J. / Hallett, S. R.	Comparison of low velocity impact modelling techniques for thermoplastic and thermoset polymer composites	659-671
Sasagawa, Takashi / Tanaka, Masato / Omote, Ryuji / Balzani, Daniel	Construction of statistically similar representative volume elements for discontinuous fiber composites	193-203
Sohouli, A. / Yildiz, M. / Suleman, A.	Cost analysis of variable stiffness composite structures with application to a wind turbine blade	681-695
Chen, H. / Wang, F. S. / Ma, X. T. / Yue, Z. F.	The coupling mechanism and damage prediction of carbon fiber/epoxy composites exposed to lightning current	436-445
Zuo, Hao / Yang, Zhibo / Xu, Caibin / Tian, Shaohua / Chen, Xuefeng	Damage identification for plate-like structures using ultrasonic guided wave based on improved MUSIC method	164-171
He, Ji / Li, Shuhui / Wang, Shanshuai	Deformation behavior of sandwich hemispherical structure under axial compression at low temperature	267-277
Shoja, Siavash / Berbyuk, Viktor / Boström, Anders	Delamination detection in composite laminates using low frequency guided waves: Numerical simulations	826-834
Gong, Linhui / Gao, Xuhao / Yang, Heng / Liu, Yinghua / Yao, Xuefeng	Design on the driveshaft of 3D 4-Directional carbon fiber braided composites	466-473
Nazari, A. R. / Kabir, M. Z. / Hosseini-Toudeshky, H.	Development of work-hardening performance in stainless-steel cylindrical columns by application of CFRP jackets	38-49
Xie, Yan / Pei, Xu / Yu, Jingjun	Double-layer sandwich annulus with ultra-low thermal expansion	709-717
Postek, Eligiusz / Sadowski, Tomasz	Dynamic pulse sensitivity of WC/Co composite	498-512
Su, Huaizhi / Wen, Zhiping / Yan, Xiaoqun / Liu, Hongping / Yang, Meng	Early-warning model of deformation safety for roller compacted concrete arch dam considering time-varying characteristics	373-381
Reis, V. L. / Opelt, C. V. / Cândido, G. M. / Rezende, M. C. / Donadon, M. V.	Effect of fiber orientation on the compressive response of plain weave carbon fiber/epoxy composites submitted to high strain rates	952-959
Chen, Hongda / Wang, Jihui / Ni, Aiqing / Ding, Anxin / Sun, Ziheng / Han, Xia	Effect of novel intumescent flame retardant on mechanical and flame retardant properties of continuous glass fibre reinforced polypropylene composites	894-902
Zhang, Kai / Su, Yu-chao / Hou, Xiu-hui / Meng, Jun-miao / Deng, Zi-Chen	Effect of pre-load on wave propagation characteristics of hexagonal lattices	361-372
Shen, Chao / Catalan, Jean-Cédric / Liu, Yu	Effects of external and air gap flows on sound transmission through finite clamped double-panel sandwich structures	286-299
Xu, Wenxiang / Wu, Yang / Jia, Mingkun	' Elastic dependence of particle-reinforced composites on anisotropic particle geometries and reinforced/weak interphase microstructures at nano- and micro-scales	124-131
Di Benedetto, R. M. / Haque, B. Z. (Gama) / Ali, M. A. / Tierney, J. / Heider, D.	Energy absorption study considering crush test on carbon fiber/epoxy and carbon fiber/polyurethane structural composite beams	242-253
Tan, Riming / Guan, Zhidong / Sun, Wei / Liu, Zhun / Xu, Jifeng	Experiment investigation on impact damage and influences on compression behaviors of single T-stiffened composite panels	486-497
Sun, Qingping / Guo, Haiding / Zhou, Guowei / Meng, Zhaoxu / Chen, Zhangxing / Kang, Hongtae / Keten, Sinan / Su, Xuming	Experimental and computational analysis of failure mechanisms in unidirectional carbon fiber reinforced polymer laminates under longitudinal compression loading	335-348
Ma, Chao / Lei, Hongshuai / Hua, Jian / Bai, Yingchun / Liang, Jun / Fang, Daining	Experimental and simulation investigation of the reversible bi-directional twisting response of tetra-chiral cylindrical shells	142-152
Miranda-Vicario, A. / Bravo, P. M. / Coghe, F.	Experimental study of the deformation of a ballistic helmet impacted with pistol ammunition	233-241
Zou, Xingxing / Wang, Jingquan	Experimental study on joints and flexural behavior of FRP truss-UHPC hybrid bridge	414-424
Sun, Wei / Vassilopoulos, Anastasios P. / Keller, Thomas	Finite element analysis of initial imperfection effects on kinking failure of unidirectional glass fiber-reinforced polymer composites	50-59
Mousa, Salaheldin / Mohamed, Hamdy M. / Benmokrane, Brahim / Ferrier, Emmanuel	Flexural behavior of full-scale circular concrete members reinforced with basalt FRP bars and spirals: Tests and theoretical studies	217-232
Wang, Jiangtao / Yuan, Wu / Liu, Yuwen / Song, Hongwei / Huang, Chenguang	High-power laser resistance of filled sandwich panel with truss cores: Ablation mechanisms and numerical simulation	574-584
Liu, Shaobo / Li, Aiqun	Hysteretic friction behavior of aluminum foam/polyurethane interpenetrating phase composites	18-29
Zemčík, H. / Kroupa, T. / Zemčík, R. / Bureš, L.	Influence of fiber spatial distribution in unidirectional composite cross-section on homogenized elastic parameters	927-933
Omairey, Sadik L. / Dunning, Peter D. / Sriramula, Srinivas	Influence of micro-scale uncertainties on the reliability of fibre-matrix composites	204-216
Ahmed, Shafique / Thostenson, Erik T. / Schumacher, Thomas / Doshi, Sagar M. / McConnell, Jennifer R.	Integration of carbon nanotube sensing skins and carbon fiber composites for monitoring and structural repair of fatigue cracked metal structures	182-192
Xu, Xiangyang / Yang, Hao / Zhang, Yi / Neumann, Ingo	Intelligent 3D data extraction method for deformation analysis of composite structures	254-258
Esfandiari, J. / Soleimani, E.	Laboratory investigation on the buckling restrained braces with an optimal percentage of microstructure, polypropylene and hybrid fibers under cyclic loads	585-598
Mao, Jia-Jia / Zhang, Wei	Linear and nonlinear free and forced vibrations of graphene reinforced piezoelectric composite plate under external voltage excitation	551-565
Bhudolia, Somen K. / Joshi, Sunil C.	Low-velocity impact response of carbon fibre composites with novel liquid Methylmethacrylate thermoplastic matrix	696-708
Sobhy, Mohammed	Magneto-electro-thermal bending of FG-graphene reinforced polymer doubly-curved shallow shells with piezoelectromagnetic faces	844-860
Zobeiry, Navid / Duffner, Caitlin	Measuring the negative pressure during processing of advanced composites	11-17
Crouvisier-Urion, Kevin / Bellat, Jean-Pierre / Gougeon, Régis D. / Karbowiak, Thomas	Mechanical properties of agglomerated cork stoppers for sparkling wines: Influence of adhesive and cork particle size	789-796
Kappel, Erik	Meshing recommendations for the P-approach application in ABAQUS – A tool for pheno-numerical spring-in prediction	1-10
Liu, Yan / Si, Xuena / Liu, Ping / Zhang, Xiong	Mesoscopic modeling and simulation of 3D orthogonal woven composites using material point method	425-435
Song, Jian / Gao, Libo / Cao, Ke / Zhang, Hongti / Xu, Shang / Jiang, Chenchen / Surjadi, James Utama / Xu, Yiming / Lu, Yang	Metal-coated hybrid meso-lattice composites and their mechanical characterizations	750-763
Yang, Jianxia / Guo, Yitong / Yao, Lan / Qiu, Yiping	Micromechanical modeling of water-induced interfacial failure of ramie fiber reinforced thermoplastic composites	259-266
Liberatore, Valeria / Ghadimi, Behzad / Rosano, Michele / Ceravolo, Rosario / Russo, Salvatore	Microstructural analysis of GFRP failure mechanisms after compressive load and temperature duress	875-885
Ma, Li / Chen, Yun-Long / Yang, Jin-Shui / Wang, Xin-Tao / Ma, Guo-Lin / Schmidt, Rüdiger / Schröder, Kai-Uwe	Modal characteristics and damping enhancement of carbon fiber composite auxetic double-arrow corrugated sandwich panels	539-550
Yavas, Denizhan / Shang, Xu / Bastawros, Ashraf F.	Mode-I fracture toughness and surface morphology evolution for contaminated adhesively bonded composite structures	513-522
Hou, Shaoyu / Pineda, Evan J.	A modified Schapery theory to predict the progressive failure of CFRP	321-334
Benzidane, R. / Sereir, Z. / Bennegadi, M. L. / Doumalin, P. / Poilane, C.	Morphology, static and fatigue behavior of a natural UD composite: The date palm petiole ‘wood’	110-123
Covezzi, F. / de Miranda, S. / Marfia, S. / Sacco, E.	Multiscale analysis of nonlinear composites via a mixed reduced order formulation	810-825
Chen, Wujun / Gao, Chengjun / Zhang, Daxu / Wang, Ligang / Qiu, Zhenyu	A new biaxial tensile shear test method to measure shear behaviour of coated fabrics for architectural use	943-951
She, Gui-Lin / Yuan, Fuh-Gwo / Ren, Yi-ru / Liu, Hai-Bo / Xiao, Wan-shen	Nonlinear bending and vibration analysis of functionally graded porous tubes via a nonlocal strain gradient theory	614-623
Ou, Xiang / Yao, Xiaohu / Zhang, Run / Zhang, Xiaoqing / Han, Qiang	Nonlinear dynamic response analysis of cylindrical composite stiffened laminates based on the weak form quadrature element method	446-457
Li, Xiao / Lv, Zheng / Qiu, Zhiping	A novel univariate method for mixed reliability evaluation of composite laminate with random and interval parameters	153-163
Thorsson, Solver I. / Waas, Anthony M. / Rassaian, Mostafa	Numerical investigation of composite laminates subject to low-velocity edge-on impact and compression after impact	648-658
Seemann, Ralf / Krause, Dieter	Numerical modelling of partially potted inserts in honeycomb sandwich panels under pull-out loading	101-109
Yamazaki, Yuta / Koyanagi, Jun / Sawamura, Yusuke / Ridha, M. / Yoneyama, Satoru / Tay, T. E.	Numerical simulation of dynamic failure behavior for cylindrical carbon fiber reinforced polymer	934-942
López-Puente, J. / Mata-Díaz, A. / Pernas-Sánchez, J. / Artero-Guerrero, J. A. / Varas, D.	Numerical study of composite fragment impacts onto rigid target	172-181
Nguyen, Tan N. / Thai, Chien H. / Nguyen-Xuan, H. / Lee, Jaehong	NURBS-based analyses of functionally graded carbon nanotube-reinforced composite shells	349-360
Joseph, Ashith P. K. / Davidson, Paul / Waas, Anthony M.	Open hole and filled hole progressive damage and failure analysis of composite laminates with a countersunk hole	523-538
Czechowski, Leszek / Bieńkowska, Maria / Szewczyk, Włodzimierz	Paperboard tubes failure due to lateral compression-experimental and numerical study	132-141
Yin, Q. / Lardeur, P. / Druesne, F.	Performances assessment of the Modal Stability Procedure for the probabilistic free vibration analysis of laminated composite structures	474-485
Khalid, Hammad R. / Nam, I. W. / Choudhry, I. / Zheng, L. / Lee, H. K.	Piezoresistive characteristics of CNT fiber-incorporated GFRP composites prepared with diversified fabrication schemes	835-843
Köllner, Anton / Völlmecke, Christina	Post-buckling behaviour and delamination growth characteristics of delaminated composite plates	777-788
Hocheng, H. / Chen, C. C. / Tsao, C. C.	Prediction of critical thrust force for tubular composite in drilling-induced delamination by numerical and experimental analysis	566-573
Rahmani, Mohamad / Farrokhabadi, Amin	Prediction of induced delamination development in [θ/90]s composite laminates using a computational analytical approach	903-916
Chen, Xiao / Qiu, Zhiping	Reliability assessment of fiber-reinforced composite laminates with correlated elastic mechanical parameters	396-403
Muc, A. / Chwał, M. / Barski, M.	Remarks on experimental and theoretical investigations of buckling loads for laminated plated and shell structures	861-874
Spagnuolo, Simone / Meda, Alberto / Rinaldi, Zila / Nanni, Antonio	Residual behaviour of glass FRP bars subjected to high temperatures	886-893
Funari, Marco Francesco / Greco, Fabrizio / Lonetti, Paolo	Sandwich panels under interfacial debonding mechanisms	310-320
Wu, Hao / Chen, An / Laflamme, Simon	Seismic behavior of glass fiber-reinforced polymer wall panels	300-309
del Rey Castillo, Enrique / Griffith, Michael / Ingham, Jason	Seismic behavior of RC columns flexurally strengthened with FRP sheets and FRP anchors	382-395
Paroissien, Eric / da Silva, Lucas F. M. / Lachaud, Frédéric	Simplified stress analysis of functionally graded single-lap joints subjected to combined thermal and mechanical loads	85-100
Pei, Shenli / Wang, Kaifeng / Li, Yang / Zeng, Danielle / Su, Xuming / Li, Jingjing / Yang, Hui / Xiao, Xianghui	Spatiotemporal characterization of 3D fracture behavior of carbon-fiber-reinforced polymer composites	30-37
Sjølund, J. H. / Lund, E.	Structural gradient based sizing optimization of wind turbine blades with fixed outer geometry	725-739
Qiu, Xinyi / Li, Pengnan / Li, Changping / Niu, Qiulin / Chen, Anhua / Ouyang, Puren / Ko, Tae Jo	Study on chisel edge drilling behavior and step drill structure on delamination in drilling CFRP	404-413
Chen, Yao / Feng, Jian / Lv, Hengzhu / Sun, Qiuzhi	Symmetry representations and elastic redundancy for members of tensegrity structures	672-680
Berton, Thomas / Haldar, Sandip / Montesano, John / Singh, Chandra Veer	Time-dependent damage analysis for viscoelastic-viscoplastic structural laminates under biaxial loading	60-70
Zhou, Xiao-Yi / Gosling, P. D.	Towards an understanding of variations in the buckling of tailored variable angle tow composite plates	797-809
Nye, Trevor K. / Pantelides, Chris P. / Burningham, Clayton A.	Unidirectional GFRP composite connections between precast concrete wall panels under simulated seismic loads	624-635
Civalek, Ömer / Baltacıoğlu, Ali Kemal	Vibration of carbon nanotube reinforced composite (CNTRC) annular sector plates by discrete singular convolution method	458-465

About this
data sheet
IssueID
37785
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - November 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - November 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.