Composite Structures - November 2018

Erschienen:	November 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Guinovart-Sanjuán, D. / Vajravelu, K. / Rodriguez-Ramos, R. / Guinovart-Diaz, R. / Bravo-Castillero, J. / Lebon, F. / Sabina, F. J.	Analysis of effective elastic properties for shell with complex geometrical shapes	278-285
Moure, M. M. / Rubio, I. / Aranda-Ruiz, J. / Loya, J. A. / Rodríguez-Millán, M.	Analysis of impact energy absorption by lightweight aramid structures	917-926
Viet, N. V. / Zaki, W. / Umer, R.	Analytical model of functionally graded material/shape memory alloy composite cantilever beam under bending	764-776
Gąsior, Paweł / Malesa, Marcin / Kaleta, Jerzy / Kujawińska, Małgorzata / Malowany, Krzysztof / Rybczyński, Radosław	Application of complementary optical methods for strain investigation in composite high pressure vessel	718-724
Wronkowicz, Angelika / Dragan, Krzysztof / Lis, Krzysztof	Assessment of uncertainty in damage evaluation by ultrasonic testing of composite structures	71-84
Li, Jun / Wu, Chengqing / Hao, Hong / Liu, Zhongxian / Yang, Yekai	Basalt scale-reinforced aluminium foam under static and dynamic loads	599-613
Hartanto, David / Hamed, Ehab / Agarwal, Ankit / Foster, Stephen J.	Behaviour of steel-CFRP lap joints under hygrothermal cycles and sustained loadings	740-749
Teng, Xiangyu / Chen, Wanqun / Huo, Dehong / Shyha, Islam / Lin, Chao	Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites	636-647
Lautenschläger, Miriam I. / Mayer, Lukas / Gebauer, Julian / Weidenmann, Kay A. / Henning, Frank / Elsner, Peter	Comparison of filler-dependent mechanical properties of jute fiber reinforced sheet and bulk molding compound	960-967
Sun, X. C. / Kawashita, L. F. / Kaddour, A. S. / Hiley, M. J. / Hallett, S. R.	Comparison of low velocity impact modelling techniques for thermoplastic and thermoset polymer composites	659-671
Sasagawa, Takashi / Tanaka, Masato / Omote, Ryuji / Balzani, Daniel	Construction of statistically similar representative volume elements for discontinuous fiber composites	193-203
Sohouli, A. / Yildiz, M. / Suleman, A.	Cost analysis of variable stiffness composite structures with application to a wind turbine blade	681-695
Chen, H. / Wang, F. S. / Ma, X. T. / Yue, Z. F.	The coupling mechanism and damage prediction of carbon fiber/epoxy composites exposed to lightning current	436-445
Zuo, Hao / Yang, Zhibo / Xu, Caibin / Tian, Shaohua / Chen, Xuefeng	Damage identification for plate-like structures using ultrasonic guided wave based on improved MUSIC method	164-171
He, Ji / Li, Shuhui / Wang, Shanshuai	Deformation behavior of sandwich hemispherical structure under axial compression at low temperature	267-277
Shoja, Siavash / Berbyuk, Viktor / Boström, Anders	Delamination detection in composite laminates using low frequency guided waves: Numerical simulations	826-834
Gong, Linhui / Gao, Xuhao / Yang, Heng / Liu, Yinghua / Yao, Xuefeng	Design on the driveshaft of 3D 4-Directional carbon fiber braided composites	466-473
Nazari, A. R. / Kabir, M. Z. / Hosseini-Toudeshky, H.	Development of work-hardening performance in stainless-steel cylindrical columns by application of CFRP jackets	38-49
Xie, Yan / Pei, Xu / Yu, Jingjun	Double-layer sandwich annulus with ultra-low thermal expansion	709-717
Postek, Eligiusz / Sadowski, Tomasz	Dynamic pulse sensitivity of WC/Co composite	498-512
Su, Huaizhi / Wen, Zhiping / Yan, Xiaoqun / Liu, Hongping / Yang, Meng	Early-warning model of deformation safety for roller compacted concrete arch dam considering time-varying characteristics	373-381
Reis, V. L. / Opelt, C. V. / Cândido, G. M. / Rezende, M. C. / Donadon, M. V.	Effect of fiber orientation on the compressive response of plain weave carbon fiber/epoxy composites submitted to high strain rates	952-959
Chen, Hongda / Wang, Jihui / Ni, Aiqing / Ding, Anxin / Sun, Ziheng / Han, Xia	Effect of novel intumescent flame retardant on mechanical and flame retardant properties of continuous glass fibre reinforced polypropylene composites	894-902
Zhang, Kai / Su, Yu-chao / Hou, Xiu-hui / Meng, Jun-miao / Deng, Zi-Chen	Effect of pre-load on wave propagation characteristics of hexagonal lattices	361-372
Shen, Chao / Catalan, Jean-Cédric / Liu, Yu	Effects of external and air gap flows on sound transmission through finite clamped double-panel sandwich structures	286-299
Xu, Wenxiang / Wu, Yang / Jia, Mingkun	' Elastic dependence of particle-reinforced composites on anisotropic particle geometries and reinforced/weak interphase microstructures at nano- and micro-scales	124-131
Di Benedetto, R. M. / Haque, B. Z. (Gama) / Ali, M. A. / Tierney, J. / Heider, D.	Energy absorption study considering crush test on carbon fiber/epoxy and carbon fiber/polyurethane structural composite beams	242-253
Tan, Riming / Guan, Zhidong / Sun, Wei / Liu, Zhun / Xu, Jifeng	Experiment investigation on impact damage and influences on compression behaviors of single T-stiffened composite panels	486-497
Sun, Qingping / Guo, Haiding / Zhou, Guowei / Meng, Zhaoxu / Chen, Zhangxing / Kang, Hongtae / Keten, Sinan / Su, Xuming	Experimental and computational analysis of failure mechanisms in unidirectional carbon fiber reinforced polymer laminates under longitudinal compression loading	335-348
Ma, Chao / Lei, Hongshuai / Hua, Jian / Bai, Yingchun / Liang, Jun / Fang, Daining	Experimental and simulation investigation of the reversible bi-directional twisting response of tetra-chiral cylindrical shells	142-152
Miranda-Vicario, A. / Bravo, P. M. / Coghe, F.	Experimental study of the deformation of a ballistic helmet impacted with pistol ammunition	233-241
Zou, Xingxing / Wang, Jingquan	Experimental study on joints and flexural behavior of FRP truss-UHPC hybrid bridge	414-424
Sun, Wei / Vassilopoulos, Anastasios P. / Keller, Thomas	Finite element analysis of initial imperfection effects on kinking failure of unidirectional glass fiber-reinforced polymer composites	50-59
Mousa, Salaheldin / Mohamed, Hamdy M. / Benmokrane, Brahim / Ferrier, Emmanuel	Flexural behavior of full-scale circular concrete members reinforced with basalt FRP bars and spirals: Tests and theoretical studies	217-232
Wang, Jiangtao / Yuan, Wu / Liu, Yuwen / Song, Hongwei / Huang, Chenguang	High-power laser resistance of filled sandwich panel with truss cores: Ablation mechanisms and numerical simulation	574-584
Liu, Shaobo / Li, Aiqun	Hysteretic friction behavior of aluminum foam/polyurethane interpenetrating phase composites	18-29
Zemčík, H. / Kroupa, T. / Zemčík, R. / Bureš, L.	Influence of fiber spatial distribution in unidirectional composite cross-section on homogenized elastic parameters	927-933
Omairey, Sadik L. / Dunning, Peter D. / Sriramula, Srinivas	Influence of micro-scale uncertainties on the reliability of fibre-matrix composites	204-216
Ahmed, Shafique / Thostenson, Erik T. / Schumacher, Thomas / Doshi, Sagar M. / McConnell, Jennifer R.	Integration of carbon nanotube sensing skins and carbon fiber composites for monitoring and structural repair of fatigue cracked metal structures	182-192
Xu, Xiangyang / Yang, Hao / Zhang, Yi / Neumann, Ingo	Intelligent 3D data extraction method for deformation analysis of composite structures	254-258
Esfandiari, J. / Soleimani, E.	Laboratory investigation on the buckling restrained braces with an optimal percentage of microstructure, polypropylene and hybrid fibers under cyclic loads	585-598
Mao, Jia-Jia / Zhang, Wei	Linear and nonlinear free and forced vibrations of graphene reinforced piezoelectric composite plate under external voltage excitation	551-565
Bhudolia, Somen K. / Joshi, Sunil C.	Low-velocity impact response of carbon fibre composites with novel liquid Methylmethacrylate thermoplastic matrix	696-708
Sobhy, Mohammed	Magneto-electro-thermal bending of FG-graphene reinforced polymer doubly-curved shallow shells with piezoelectromagnetic faces	844-860
Zobeiry, Navid / Duffner, Caitlin	Measuring the negative pressure during processing of advanced composites	11-17
Crouvisier-Urion, Kevin / Bellat, Jean-Pierre / Gougeon, Régis D. / Karbowiak, Thomas	Mechanical properties of agglomerated cork stoppers for sparkling wines: Influence of adhesive and cork particle size	789-796
Kappel, Erik	Meshing recommendations for the P-approach application in ABAQUS – A tool for pheno-numerical spring-in prediction	1-10
Liu, Yan / Si, Xuena / Liu, Ping / Zhang, Xiong	Mesoscopic modeling and simulation of 3D orthogonal woven composites using material point method	425-435
Song, Jian / Gao, Libo / Cao, Ke / Zhang, Hongti / Xu, Shang / Jiang, Chenchen / Surjadi, James Utama / Xu, Yiming / Lu, Yang	Metal-coated hybrid meso-lattice composites and their mechanical characterizations	750-763
Yang, Jianxia / Guo, Yitong / Yao, Lan / Qiu, Yiping	Micromechanical modeling of water-induced interfacial failure of ramie fiber reinforced thermoplastic composites	259-266
Liberatore, Valeria / Ghadimi, Behzad / Rosano, Michele / Ceravolo, Rosario / Russo, Salvatore	Microstructural analysis of GFRP failure mechanisms after compressive load and temperature duress	875-885
Ma, Li / Chen, Yun-Long / Yang, Jin-Shui / Wang, Xin-Tao / Ma, Guo-Lin / Schmidt, Rüdiger / Schröder, Kai-Uwe	Modal characteristics and damping enhancement of carbon fiber composite auxetic double-arrow corrugated sandwich panels	539-550
Yavas, Denizhan / Shang, Xu / Bastawros, Ashraf F.	Mode-I fracture toughness and surface morphology evolution for contaminated adhesively bonded composite structures	513-522
Hou, Shaoyu / Pineda, Evan J.	A modified Schapery theory to predict the progressive failure of CFRP	321-334
Benzidane, R. / Sereir, Z. / Bennegadi, M. L. / Doumalin, P. / Poilane, C.	Morphology, static and fatigue behavior of a natural UD composite: The date palm petiole ‘wood’	110-123
Covezzi, F. / de Miranda, S. / Marfia, S. / Sacco, E.	Multiscale analysis of nonlinear composites via a mixed reduced order formulation	810-825
Chen, Wujun / Gao, Chengjun / Zhang, Daxu / Wang, Ligang / Qiu, Zhenyu	A new biaxial tensile shear test method to measure shear behaviour of coated fabrics for architectural use	943-951
She, Gui-Lin / Yuan, Fuh-Gwo / Ren, Yi-ru / Liu, Hai-Bo / Xiao, Wan-shen	Nonlinear bending and vibration analysis of functionally graded porous tubes via a nonlocal strain gradient theory	614-623
Ou, Xiang / Yao, Xiaohu / Zhang, Run / Zhang, Xiaoqing / Han, Qiang	Nonlinear dynamic response analysis of cylindrical composite stiffened laminates based on the weak form quadrature element method	446-457
Li, Xiao / Lv, Zheng / Qiu, Zhiping	A novel univariate method for mixed reliability evaluation of composite laminate with random and interval parameters	153-163
Thorsson, Solver I. / Waas, Anthony M. / Rassaian, Mostafa	Numerical investigation of composite laminates subject to low-velocity edge-on impact and compression after impact	648-658
Seemann, Ralf / Krause, Dieter	Numerical modelling of partially potted inserts in honeycomb sandwich panels under pull-out loading	101-109
Yamazaki, Yuta / Koyanagi, Jun / Sawamura, Yusuke / Ridha, M. / Yoneyama, Satoru / Tay, T. E.	Numerical simulation of dynamic failure behavior for cylindrical carbon fiber reinforced polymer	934-942
López-Puente, J. / Mata-Díaz, A. / Pernas-Sánchez, J. / Artero-Guerrero, J. A. / Varas, D.	Numerical study of composite fragment impacts onto rigid target	172-181
Nguyen, Tan N. / Thai, Chien H. / Nguyen-Xuan, H. / Lee, Jaehong	NURBS-based analyses of functionally graded carbon nanotube-reinforced composite shells	349-360
Joseph, Ashith P. K. / Davidson, Paul / Waas, Anthony M.	Open hole and filled hole progressive damage and failure analysis of composite laminates with a countersunk hole	523-538
Czechowski, Leszek / Bieńkowska, Maria / Szewczyk, Włodzimierz	Paperboard tubes failure due to lateral compression-experimental and numerical study	132-141
Yin, Q. / Lardeur, P. / Druesne, F.	Performances assessment of the Modal Stability Procedure for the probabilistic free vibration analysis of laminated composite structures	474-485
Khalid, Hammad R. / Nam, I. W. / Choudhry, I. / Zheng, L. / Lee, H. K.	Piezoresistive characteristics of CNT fiber-incorporated GFRP composites prepared with diversified fabrication schemes	835-843
Köllner, Anton / Völlmecke, Christina	Post-buckling behaviour and delamination growth characteristics of delaminated composite plates	777-788
Hocheng, H. / Chen, C. C. / Tsao, C. C.	Prediction of critical thrust force for tubular composite in drilling-induced delamination by numerical and experimental analysis	566-573
Rahmani, Mohamad / Farrokhabadi, Amin	Prediction of induced delamination development in [θ/90]s composite laminates using a computational analytical approach	903-916
Chen, Xiao / Qiu, Zhiping	Reliability assessment of fiber-reinforced composite laminates with correlated elastic mechanical parameters	396-403
Muc, A. / Chwał, M. / Barski, M.	Remarks on experimental and theoretical investigations of buckling loads for laminated plated and shell structures	861-874
Spagnuolo, Simone / Meda, Alberto / Rinaldi, Zila / Nanni, Antonio	Residual behaviour of glass FRP bars subjected to high temperatures	886-893
Funari, Marco Francesco / Greco, Fabrizio / Lonetti, Paolo	Sandwich panels under interfacial debonding mechanisms	310-320
Wu, Hao / Chen, An / Laflamme, Simon	Seismic behavior of glass fiber-reinforced polymer wall panels	300-309
del Rey Castillo, Enrique / Griffith, Michael / Ingham, Jason	Seismic behavior of RC columns flexurally strengthened with FRP sheets and FRP anchors	382-395
Paroissien, Eric / da Silva, Lucas F. M. / Lachaud, Frédéric	Simplified stress analysis of functionally graded single-lap joints subjected to combined thermal and mechanical loads	85-100
Pei, Shenli / Wang, Kaifeng / Li, Yang / Zeng, Danielle / Su, Xuming / Li, Jingjing / Yang, Hui / Xiao, Xianghui	Spatiotemporal characterization of 3D fracture behavior of carbon-fiber-reinforced polymer composites	30-37
Sjølund, J. H. / Lund, E.	Structural gradient based sizing optimization of wind turbine blades with fixed outer geometry	725-739
Qiu, Xinyi / Li, Pengnan / Li, Changping / Niu, Qiulin / Chen, Anhua / Ouyang, Puren / Ko, Tae Jo	Study on chisel edge drilling behavior and step drill structure on delamination in drilling CFRP	404-413
Chen, Yao / Feng, Jian / Lv, Hengzhu / Sun, Qiuzhi	Symmetry representations and elastic redundancy for members of tensegrity structures	672-680
Berton, Thomas / Haldar, Sandip / Montesano, John / Singh, Chandra Veer	Time-dependent damage analysis for viscoelastic-viscoplastic structural laminates under biaxial loading	60-70
Zhou, Xiao-Yi / Gosling, P. D.	Towards an understanding of variations in the buckling of tailored variable angle tow composite plates	797-809
Nye, Trevor K. / Pantelides, Chris P. / Burningham, Clayton A.	Unidirectional GFRP composite connections between precast concrete wall panels under simulated seismic loads	624-635
Civalek, Ömer / Baltacıoğlu, Ali Kemal	Vibration of carbon nanotube reinforced composite (CNTRC) annular sector plates by discrete singular convolution method	458-465

Über diese
Datenseite
IssueID
37785
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - November 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - November 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.