Composite Structures - March 2019

Published:	March 2019

Articles in this Issue

Author(s)	Title	Page(s)
Vaiana, Nicolò / Sessa, Salvatore / Marmo, Francesco / Rosati, Luciano	An accurate and computationally efficient uniaxial phenomenological model for steel and fiber reinforced elastomeric bearings	196-212
Sahoo, S. R. / Ray, M. C.	Active control of laminated composite plates using elliptical smart constrained layer damping treatment	376-389
Yang, C. / Shahverdi Moghaddam, H. / Keshavanarayana, S. R. / Horner, A. L.	An analytical approach to characterize uniaxial in-plane responses of commercial hexagonal honeycomb core under large deformations	100-111
Guerrero, Jose M. / Tavares, Rodrigo P. / Otero, Fermin / Mayugo, Joan A. / Costa, Josep / Turon, Albert / Camanho, Pedro P.	An analytical model to predict stress fields around broken fibres and their effect on the longitudinal failure of hybrid composites	564-576
Domagalski, Łukasz / Świątek, Michał / Jędrysiak, Jarosław	An analytical-numerical approach to vibration analysis of periodic Timoshenko beams	490-501
Liu, Jiepeng / Xu, Tianxiang / Guo, Ying / Wang, Xuanding / Chen, Y. Frank	Behavior of circular CFRP-steel composite tubed high-strength concrete columns under axial compression	596-609
Özen, İlhan / Haskan, Hayriye / Okyay, Gamze / Demiryürek, Oğuz	Characterizing the thermal and mechanical properties and improvement in sound insulation performance of magnetite containing nonwovens depending on coating conditions	254-263
Karumbaiah, Kariappa M. / Kracke, Christoph / Battley, Mark / Bickerton, Simon / Allen, Tom	Damage assessment of carbon-epoxy composites with and without resin flow channels	213-220
Lu, Lingling / Le, Jie / Song, Hongwei / Wang, Yabo / Huang, Chenguang	Damage detection of sandwich panels with truss core based on time domain dynamic responses	443-454
Xu, D. / Liu, P. F. / Li, J. G. / Chen, Z. P.	Damage mode identification of adhesive composite joints under hygrothermal environment using acoustic emission and machine learning	351-363
Li, Jiejie / Tian, Chenyao / Lu, Binbin / Xian, Yuehui / Wu, Runni / Hu, Guoming / Xia, Re	Deformation behavior of nanoporous gold based composite in compression: A finite element analysis	229-235
Zhou, Jinzhu / Cai, Zhiheng / Kang, Le / Tang, Baofu / Xu, Wenhua	Deformation sensing and electrical compensation of smart skin antenna structure with optimal fiber Bragg grating strain sensor placements	418-432
Gao, Jie / Luo, Zhen / Li, Hao / Li, Peigen / Gao, Liang	Dynamic multiscale topology optimization for multi-regional micro-structured cellular composites	401-417
Al-Jaberi, Zuhair / Myers, John J. / Chandrashekhara, K.	Effect of direct service temperature exposure on the bond behavior between advanced composites and CMU using NSM and EB techniques	63-75
Hagenbeek, Michiel / Sinke, Jos	Effect of thermal cycling heated Fibre Metal Laminates under static load	540-545
Ashrith, H. S. / Doddamani, Mrityunjay / Gaitonde, Vinayak	Effect of wall thickness and cutting parameters on drilling of glass microballoon/epoxy syntactic foam composites	318-336
Zhang, Zhen / Xiao, Yi / Xie, Yuanhong / Su, Zhongqing	Effects of contact between rough surfaces on the dynamic responses of bolted composite joints: Multiscale modeling and numerical simulation	13-23
Li, Chuanxi / Ke, Lu / He, Jun / Chen, Zhuoyi / Jiao, Yang	Effects of mechanical properties of adhesive and CFRP on the bond behavior in CFRP-strengthened steel structures	163-174
Biscaia, Hugo C. / Chastre, Carlos / Silva, Manuel A. G.	Estimations of the debonding process of aged joints through a new analytical method	577-595
Tian, Chao / An, Xuanyi / Sun, Qitian / Dong, Yongxiang	Experimental and numerical analyses of the penetration resistance of ceramic-metal hybrid structures	264-272
Hamamousse, K. / Sereir, Z. / Benzidane, R. / Gehring, F. / Gomina, M. / Poilane, C.	Experimental and numerical studies on the low-velocity impact response of orthogrid epoxy panels reinforced with short plant fibers	469-480
Najafabadi, Esmaeil Pournamazian / Khaneghahi, Mohammad Houshmand / Ahmadie Amiri, Hossein / Estekanchi, Homayoon Esmaeilpour / Ozbakkaloglu, Togay	Experimental investigation and probabilistic models for residual mechanical properties of GFRP pultruded profiles exposed to elevated temperatures	610-629
Mechin, P.-Y. / Keryvin, V. / Grandidier, J.-C. / Glehen, D.	An experimental protocol to measure the parameters affecting the compressive strength of CFRP with a fibre micro-buckling failure criterion	154-162
Attia, Karim / Alnahhal, Wael / Elrefai, Ahmed / Rihan, Yousef	Flexural behavior of basalt fiber-reinforced concrete slab strips reinforced with BFRP and GFRP bars	1-12
Zhou, Wei / Xie, Xinying	Flexural response of continuous unbonded post-tensioned beams strengthened with CFRP laminates	455-468
Xu, Rui / Hui, Yanchuan / Hu, Heng / Huang, Qun / Zahrouni, Hamid / Zineb, Tarak Ben / Potier-Ferry, Michel	A Fourier-related FE2 multiscale model for instability phenomena of long fiber reinforced materials	530-539
Montazerian, H. / Rashidi, A. / Hoorfar, M. / Milani, A. S.	A frameless picture frame test with embedded sensor: Mitigation of imperfections in shear characterization of woven fabrics	112-124
Zhang, Junjie / Hu, Meiqi / Liu, Shengkai / Wang, Lei / Gu, Bohong / Sun, Baozhong	High strain rate compressive behaviors and adiabatic shear band localization of 3-D carbon/epoxy angle-interlock woven composites at different loading directions	502-521
Zhong, Yucheng / Cheng, Mingyang / Zhang, Xin / Hu, Haixiao / Cao, Dongfeng / Li, Shuxin	Hygrothermal durability of glass and carbon fiber reinforced composites – A comparative study	134-143
Jang, Byeong-Wook / Kim, Chun-Gon	Impact localization of composite stiffened panel with triangulation method using normalized magnitudes of fiber optic sensor signals	522-529
Aditya Narayan, D. / Ganapathi, M. / Pradyumna, B. / Haboussi, M.	Investigation of thermo-elastic buckling of variable stiffness laminated composite shells using finite element approach based on higher-order theory	24-40
Dean, A. / Grbic, N. / Rolfes, R. / Behrens, B.	Macro-mechanical modeling and experimental validation of anisotropic, pressure- and temperature-dependent behavior of short fiber composites	630-643
Yetman, J. E. / Sobey, A. J. / Blake, J. I. R. / Shenoi, R. A.	Modelling the variability of skin stiffener debonding in post-cured top-hat stiffened panels	187-195
Koutsawa, Yao	New micromechanics approaches for the effective properties of multiferroics composites with spring-type imperfect interfaces	41-55
Yu, Tiantang / Zhang, Jiankang / Hu, Huifeng / Bui, Tinh Quoc	A novel size-dependent quasi-3D isogeometric beam model for two-directional FG microbeams analysis	76-88
Amirpour, Maedeh / Bickerton, Simon / Calius, Emilio / Das, Raj / Mace, Brian	Numerical and experimental study on deformation of 3D-printed polymeric functionally graded plates: 3D-Digital Image Correlation approach	481-489
Lacki, Piotr / Nawrot, Jacek / Derlatka, Anna / Winowiecka, Julita	Numerical and experimental tests of steel-concrete composite beam with the connector made of top-hat profile	244-253
Kim, Jae-In / Hwang, Yeon-Taek / Choi, Kyung-Hee / Kim, Hee-June / Kim, Hak-Sung	Prediction of the vacuum assisted resin transfer molding (VARTM) process considering the directional permeability of sheared woven fabric	236-243
Cao, M. / Zhao, Y. / Gu, B. H. / Sun, B. Z. / Tay, T. E.	Progressive failure of inter-woven carbon-Dyneema fabric reinforced hybrid composites	175-186
Bekas, Dimitrios G. / Sharif-Khodaei, Zahra / Baltzis, Dimitrios / Aliabadi, M. H. Ferri / Paipetis, Alkiviadis S.	Quality assessment and damage detection in nanomodified adhesively-bonded composite joints using inkjet-printed interdigital sensors	557-563
Wu, Zengwen / Fang, Guodong / Fu, Maoqing / Chen, Xiaojie / Liang, Jun / Lv, Dongkai	Random fatigue damage accumulation analysis of composite thin-wall structures based on residual stiffness method	546-556
Liu, Liqin / Bian, Hengdong / Du, Zunfeng / Xiao, Changshui / Guo, Ying / Jin, Weichen	Reliability analysis of blade of the offshore wind turbine supported by the floating foundation	287-300
Sofiyev, A. H.	Review of research on the vibration and buckling of the FGM conical shells	301-317
Qazi, Samiullah / Michel, Laurent / Ferrier, Emmanuel	Seismic behaviour of RC short shear wall strengthened with externally bonded CFRP strips	390-400
Freund, J.	Shear-corrected Reissner-Mindlin plate model	144-153
Kim, Hyung min / Lee, Suyeon / Song, Young Seok / Lee, Doojin	Synergistic improvement of electrical and thermal conductivities of carbon-based nanocomposites and its prediction by Mori-Tanaka scheme with interfacial resistances	56-62
Zheng, Weiling / Kassapoglou, Christos / Zheng, Longxi	Tailoring of AP-PLY composite laminates for improved performance in the presence of delaminations	89-99
Shen, Hui-Shen / Xiang, Y. / Reddy, J. N.	Thermal postbuckling behavior of FG-GRC laminated cylindrical panels with temperature-dependent properties	433-442
Liu, Yang / Wang, Xu / Gao, Yuanwen	Three-dimensional multifilament finite element models of Bi-2212 high-temperature superconducting round wire under axial load	273-286
Wang, Miao / Xu, Yong-Gang / Qiao, Pizhong / Li, Zhi-Min	A two-dimensional elasticity model for bending and free vibration analysis of laminated graphene-reinforced composite beams	364-375
Liu, Xiaoyang / Featherston, Carol A. / Kennedy, David	Two-level layup optimization of composite laminate using lamination parameters	337-350
Derusova, Daria / Vavilov, Vladimir / Sfarra, Stefano / Sarasini, Fabrizio / Krasnoveikin, Vladimir / Chulkov, Arsenii / Pawar, Sachin	Ultrasonic spectroscopic analysis of impact damage in composites by using laser vibrometry	221-228
de Barros, S. / Fadhil, B. M. / Alila, F. / Diop, J. / Reis, J. M. L. / Casari, P. / Jacquemin, F.	Using blister test to predict the failure pressure in bonded composite repaired pipes	125-133

About this
data sheet
IssueID
37777
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - March 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - March 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.