Composite Structures - März 2019

Erschienen:	März 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Vaiana, Nicolò / Sessa, Salvatore / Marmo, Francesco / Rosati, Luciano	An accurate and computationally efficient uniaxial phenomenological model for steel and fiber reinforced elastomeric bearings	196-212
Sahoo, S. R. / Ray, M. C.	Active control of laminated composite plates using elliptical smart constrained layer damping treatment	376-389
Yang, C. / Shahverdi Moghaddam, H. / Keshavanarayana, S. R. / Horner, A. L.	An analytical approach to characterize uniaxial in-plane responses of commercial hexagonal honeycomb core under large deformations	100-111
Guerrero, Jose M. / Tavares, Rodrigo P. / Otero, Fermin / Mayugo, Joan A. / Costa, Josep / Turon, Albert / Camanho, Pedro P.	An analytical model to predict stress fields around broken fibres and their effect on the longitudinal failure of hybrid composites	564-576
Domagalski, Łukasz / Świątek, Michał / Jędrysiak, Jarosław	An analytical-numerical approach to vibration analysis of periodic Timoshenko beams	490-501
Liu, Jiepeng / Xu, Tianxiang / Guo, Ying / Wang, Xuanding / Chen, Y. Frank	Behavior of circular CFRP-steel composite tubed high-strength concrete columns under axial compression	596-609
Özen, İlhan / Haskan, Hayriye / Okyay, Gamze / Demiryürek, Oğuz	Characterizing the thermal and mechanical properties and improvement in sound insulation performance of magnetite containing nonwovens depending on coating conditions	254-263
Karumbaiah, Kariappa M. / Kracke, Christoph / Battley, Mark / Bickerton, Simon / Allen, Tom	Damage assessment of carbon-epoxy composites with and without resin flow channels	213-220
Lu, Lingling / Le, Jie / Song, Hongwei / Wang, Yabo / Huang, Chenguang	Damage detection of sandwich panels with truss core based on time domain dynamic responses	443-454
Xu, D. / Liu, P. F. / Li, J. G. / Chen, Z. P.	Damage mode identification of adhesive composite joints under hygrothermal environment using acoustic emission and machine learning	351-363
Li, Jiejie / Tian, Chenyao / Lu, Binbin / Xian, Yuehui / Wu, Runni / Hu, Guoming / Xia, Re	Deformation behavior of nanoporous gold based composite in compression: A finite element analysis	229-235
Zhou, Jinzhu / Cai, Zhiheng / Kang, Le / Tang, Baofu / Xu, Wenhua	Deformation sensing and electrical compensation of smart skin antenna structure with optimal fiber Bragg grating strain sensor placements	418-432
Gao, Jie / Luo, Zhen / Li, Hao / Li, Peigen / Gao, Liang	Dynamic multiscale topology optimization for multi-regional micro-structured cellular composites	401-417
Al-Jaberi, Zuhair / Myers, John J. / Chandrashekhara, K.	Effect of direct service temperature exposure on the bond behavior between advanced composites and CMU using NSM and EB techniques	63-75
Hagenbeek, Michiel / Sinke, Jos	Effect of thermal cycling heated Fibre Metal Laminates under static load	540-545
Ashrith, H. S. / Doddamani, Mrityunjay / Gaitonde, Vinayak	Effect of wall thickness and cutting parameters on drilling of glass microballoon/epoxy syntactic foam composites	318-336
Zhang, Zhen / Xiao, Yi / Xie, Yuanhong / Su, Zhongqing	Effects of contact between rough surfaces on the dynamic responses of bolted composite joints: Multiscale modeling and numerical simulation	13-23
Li, Chuanxi / Ke, Lu / He, Jun / Chen, Zhuoyi / Jiao, Yang	Effects of mechanical properties of adhesive and CFRP on the bond behavior in CFRP-strengthened steel structures	163-174
Biscaia, Hugo C. / Chastre, Carlos / Silva, Manuel A. G.	Estimations of the debonding process of aged joints through a new analytical method	577-595
Tian, Chao / An, Xuanyi / Sun, Qitian / Dong, Yongxiang	Experimental and numerical analyses of the penetration resistance of ceramic-metal hybrid structures	264-272
Hamamousse, K. / Sereir, Z. / Benzidane, R. / Gehring, F. / Gomina, M. / Poilane, C.	Experimental and numerical studies on the low-velocity impact response of orthogrid epoxy panels reinforced with short plant fibers	469-480
Najafabadi, Esmaeil Pournamazian / Khaneghahi, Mohammad Houshmand / Ahmadie Amiri, Hossein / Estekanchi, Homayoon Esmaeilpour / Ozbakkaloglu, Togay	Experimental investigation and probabilistic models for residual mechanical properties of GFRP pultruded profiles exposed to elevated temperatures	610-629
Mechin, P.-Y. / Keryvin, V. / Grandidier, J.-C. / Glehen, D.	An experimental protocol to measure the parameters affecting the compressive strength of CFRP with a fibre micro-buckling failure criterion	154-162
Attia, Karim / Alnahhal, Wael / Elrefai, Ahmed / Rihan, Yousef	Flexural behavior of basalt fiber-reinforced concrete slab strips reinforced with BFRP and GFRP bars	1-12
Zhou, Wei / Xie, Xinying	Flexural response of continuous unbonded post-tensioned beams strengthened with CFRP laminates	455-468
Xu, Rui / Hui, Yanchuan / Hu, Heng / Huang, Qun / Zahrouni, Hamid / Zineb, Tarak Ben / Potier-Ferry, Michel	A Fourier-related FE2 multiscale model for instability phenomena of long fiber reinforced materials	530-539
Montazerian, H. / Rashidi, A. / Hoorfar, M. / Milani, A. S.	A frameless picture frame test with embedded sensor: Mitigation of imperfections in shear characterization of woven fabrics	112-124
Zhang, Junjie / Hu, Meiqi / Liu, Shengkai / Wang, Lei / Gu, Bohong / Sun, Baozhong	High strain rate compressive behaviors and adiabatic shear band localization of 3-D carbon/epoxy angle-interlock woven composites at different loading directions	502-521
Zhong, Yucheng / Cheng, Mingyang / Zhang, Xin / Hu, Haixiao / Cao, Dongfeng / Li, Shuxin	Hygrothermal durability of glass and carbon fiber reinforced composites – A comparative study	134-143
Jang, Byeong-Wook / Kim, Chun-Gon	Impact localization of composite stiffened panel with triangulation method using normalized magnitudes of fiber optic sensor signals	522-529
Aditya Narayan, D. / Ganapathi, M. / Pradyumna, B. / Haboussi, M.	Investigation of thermo-elastic buckling of variable stiffness laminated composite shells using finite element approach based on higher-order theory	24-40
Dean, A. / Grbic, N. / Rolfes, R. / Behrens, B.	Macro-mechanical modeling and experimental validation of anisotropic, pressure- and temperature-dependent behavior of short fiber composites	630-643
Yetman, J. E. / Sobey, A. J. / Blake, J. I. R. / Shenoi, R. A.	Modelling the variability of skin stiffener debonding in post-cured top-hat stiffened panels	187-195
Koutsawa, Yao	New micromechanics approaches for the effective properties of multiferroics composites with spring-type imperfect interfaces	41-55
Yu, Tiantang / Zhang, Jiankang / Hu, Huifeng / Bui, Tinh Quoc	A novel size-dependent quasi-3D isogeometric beam model for two-directional FG microbeams analysis	76-88
Amirpour, Maedeh / Bickerton, Simon / Calius, Emilio / Das, Raj / Mace, Brian	Numerical and experimental study on deformation of 3D-printed polymeric functionally graded plates: 3D-Digital Image Correlation approach	481-489
Lacki, Piotr / Nawrot, Jacek / Derlatka, Anna / Winowiecka, Julita	Numerical and experimental tests of steel-concrete composite beam with the connector made of top-hat profile	244-253
Kim, Jae-In / Hwang, Yeon-Taek / Choi, Kyung-Hee / Kim, Hee-June / Kim, Hak-Sung	Prediction of the vacuum assisted resin transfer molding (VARTM) process considering the directional permeability of sheared woven fabric	236-243
Cao, M. / Zhao, Y. / Gu, B. H. / Sun, B. Z. / Tay, T. E.	Progressive failure of inter-woven carbon-Dyneema fabric reinforced hybrid composites	175-186
Bekas, Dimitrios G. / Sharif-Khodaei, Zahra / Baltzis, Dimitrios / Aliabadi, M. H. Ferri / Paipetis, Alkiviadis S.	Quality assessment and damage detection in nanomodified adhesively-bonded composite joints using inkjet-printed interdigital sensors	557-563
Wu, Zengwen / Fang, Guodong / Fu, Maoqing / Chen, Xiaojie / Liang, Jun / Lv, Dongkai	Random fatigue damage accumulation analysis of composite thin-wall structures based on residual stiffness method	546-556
Liu, Liqin / Bian, Hengdong / Du, Zunfeng / Xiao, Changshui / Guo, Ying / Jin, Weichen	Reliability analysis of blade of the offshore wind turbine supported by the floating foundation	287-300
Sofiyev, A. H.	Review of research on the vibration and buckling of the FGM conical shells	301-317
Qazi, Samiullah / Michel, Laurent / Ferrier, Emmanuel	Seismic behaviour of RC short shear wall strengthened with externally bonded CFRP strips	390-400
Freund, J.	Shear-corrected Reissner-Mindlin plate model	144-153
Kim, Hyung min / Lee, Suyeon / Song, Young Seok / Lee, Doojin	Synergistic improvement of electrical and thermal conductivities of carbon-based nanocomposites and its prediction by Mori-Tanaka scheme with interfacial resistances	56-62
Zheng, Weiling / Kassapoglou, Christos / Zheng, Longxi	Tailoring of AP-PLY composite laminates for improved performance in the presence of delaminations	89-99
Shen, Hui-Shen / Xiang, Y. / Reddy, J. N.	Thermal postbuckling behavior of FG-GRC laminated cylindrical panels with temperature-dependent properties	433-442
Liu, Yang / Wang, Xu / Gao, Yuanwen	Three-dimensional multifilament finite element models of Bi-2212 high-temperature superconducting round wire under axial load	273-286
Wang, Miao / Xu, Yong-Gang / Qiao, Pizhong / Li, Zhi-Min	A two-dimensional elasticity model for bending and free vibration analysis of laminated graphene-reinforced composite beams	364-375
Liu, Xiaoyang / Featherston, Carol A. / Kennedy, David	Two-level layup optimization of composite laminate using lamination parameters	337-350
Derusova, Daria / Vavilov, Vladimir / Sfarra, Stefano / Sarasini, Fabrizio / Krasnoveikin, Vladimir / Chulkov, Arsenii / Pawar, Sachin	Ultrasonic spectroscopic analysis of impact damage in composites by using laser vibrometry	221-228
de Barros, S. / Fadhil, B. M. / Alila, F. / Diop, J. / Reis, J. M. L. / Casari, P. / Jacquemin, F.	Using blister test to predict the failure pressure in bonded composite repaired pipes	125-133

Über diese
Datenseite
IssueID
37777
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - März 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - März 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.