Composite Structures - November 2020

Published:	November 2020

Articles in this Issue

Author(s)	Title	Page(s)
Tao, Ran / Xi, Li / Wu, Wenwang / Li, Ying / Liao, Binbin / Liu, Liwu / Leng, Jinsong / Fang, Daining	4D printed multi-stable metamaterials with mechanically tunable performance	112663
Jain, D. / Zhao, Y. Q. / Batra, R. C.	Analysis of three-dimensional bending deformations and failure of wet and dry laminates	112687
Yaghoobi, Hessameddin / Taheri, Farid	Analytical solution and statistical analysis of buckling capacity of sandwich plates with uniform and non-uniform porous core reinforced with graphene nanoplatelets	112700
Pillai, Udit / Triantafyllou, Savvas P. / Essa, Yasser / de la Escalera, Federico Martin	An anisotropic cohesive phase field model for quasi-brittle fractures in thin fibre-reinforced composites	112635
Zhang, Rui / Qiang, Lu-Sheng / Han, Bin / Zhao, Zhen-yu / Zhang, Qian-Cheng / Ni, Chang-Ye / Lu, Tian Jian	Ballistic performance of UHMWPE laminated plates and UHMWPE encapsulated aluminum structures: Numerical simulation	112686
Nie, X. F. / Zhang, S. S. / Yu, T.	Behaviour of RC beams with a fibre-reinforced polymer (FRP)-strengthened web opening	112684
Wang, Xue / Shi, Xiao-long / Meng, Qing-kai / Hu, Ying-cheng / Wang, Li-hai	Bending behaviors of three grid sandwich structures with wood facing and jute fabrics/epoxy composites cores	112666
Amabili, Marco / Balasubramanian, Prabakaran / Garziera, Rinaldo / Royer-Carfagni, Gianni	Blast loads and nonlinear vibrations of laminated glass plates in an enhanced shear deformation theory	112720
Arteiro, Albertino / Sharma, Naresh / Melo, Jose Daniel D. / Ha, Sung Kyu / Miravete, Antonio / Miyano, Yasushi / Massard, Thierry / Shah, Pranav D. / Roy, Surajit / Rainsberger, Robert / Rother, Klemens / Cimini Jr., Carlos / Seng, Jocelyn M. / Arakaki, Francisco K. / Tay, Tong-Earn / Lee, Woo Il / Sihn, Sangwook / Springer, George S. / Roy, Ajit / Riccio, Aniello / Di Caprio, Francesco / Shrivastava, Sachin / Nettles, Alan T. / Catalanotti, Giuseppe / Camanho, Pedro P. / Seneviratne, Waruna / Marques, António T. / Yang, Henry T. / Thomas Hahn, H.	A case for Tsai’s Modulus, an invariant-based approach to stiffness	112683
Al-Furjan, M. S. H. / Habibi, Mostafa / Chen, Guojin / Safarpour, Hamed / Safarpour, Mehran / Tounsi, Abdelouahed	Chaotic oscillation of a multi-scale hybrid nano-composites reinforced disk under harmonic excitation via GDQM	112737
Daniel, Pierre M. / Främby, Johannes / Fagerström, Martin / Maimí, Pere	Complete transverse stress recovery model for linear shell elements in arbitrarily curved laminates	112675
Katunin, Andrzej / Pawlak, Sebastian / Wronkowicz-Katunin, Angelika / Tutajewicz, Dawid	Damage progression in fibre reinforced polymer composites subjected to low-velocity repeated impact loading	112735
Gong, Yanfeng / Shao, Hongliang / Luo, Jun / Li, Zhixue	A deep transfer learning model for inclusion defect detection of aeronautics composite materials	112681
Novak, Nejc / Dobnik Dubrovski, Polona / Borovinšek, Matej / Vesenjak, Matej / Ren, Zoran	Deformation behaviour of advanced textile composites with auxetic structure	112761
Ke, Jun / Wu, Zhen-Yu / Liu, Yi-sheng / Xiang, Zhong / Hu, Xu-dong	Design method, performance investigation and manufacturing process of composite helical springs: A review	112747
Hoang, Van-Nam / Tran, Phuong / Vu, Van-Tuyen / Nguyen-Xuan, H.	Design of lattice structures with direct multiscale topology optimization	112718
Namvar, A. R. / Vosoughi, A. R.	Design optimization of moderately thick hexagonal honeycomb sandwich plate with modified multi-objective particle swarm optimization by genetic algorithm (MOPSOGA)	112626
Allahkarami, Farshid / Ghassabzadeh Saryazdi, Maryam / Tohidi, Hasan	Dynamic buckling analysis of bi-directional functionally graded porous truncated conical shell with different boundary conditions	112680
Wang, Ben / Wang, Yufeng / Zhao, Hua / Sun, Lei / Wang, Minghai / Kong, Xianjun	Effect of a Ti alloy layer on CFRP hole quality during helical milling of CFRP/Ti laminate	112670
Zhang, Yifan / Guo, Qiwei / Chen, Xiaoming / Xie, Junbo / Chen, Li	Effect of apertures on tensile property of warp-reinforced 2.5D woven composites notched plates	112693
Deng, Fangqian / Xu, Lihua / Chi, Yin / Wu, Fanghong / Chen, Qian	Effect of steel-polypropylene hybrid fiber and coarse aggregate inclusion on the stress–strain behavior of ultra-high performance concrete under uniaxial compression	112685
Jiao, Wei / Chen, Li / Xie, Junbo / Yang, Zhi / Fang, Jing / Chen, Lei	Effect of weaving structures on the geometry variations and mechanical properties of 3D LTL woven composites	112756
Ren, Zhaokun / Liu, Liwu / Liu, Yanju / Leng, Jinsong	Electric power repair tools made of shape memory composites: Analysis and investigation	112712
Quan, Dong / Alderliesten, René / Dransfeld, Clemens / Murphy, Neal / Ivanković, Alojz / Benedictus, Rinze	Enhancing the fracture toughness of carbon fibre/epoxy composites by interleaving hybrid meltable/non-meltable thermoplastic veils	112699
Wannapa, N. / Uthaisangsuk, V.	Experimental and numerical failure analyses of dissimilar material joints between aluminium and thermoplastic	112762
Esmaeili, A. / Ma, D. / Manes, A. / Oggioni, T. / Jiménez-Suárez, A. / Ureña, A. / Hamouda, A. M. S. / Sbarufatti, C.	An experimental and numerical investigation of highly strong and tough epoxy based nanocomposite by addition of MWCNTs: Tensile and mode I fracture tests	112692
Demiral, Murat / Tanabi, Hamed / Sabuncuoglu, Baris	Experimental and numerical investigation of transverse shear behavior of glass-fibre composites with embedded vascular channel	112697
Zhao, Tian / Jiang, Yongbo / Zhu, Yangxuan / Wan, Zhishuai / Xiao, Dengbao / Li, Ying / Li, Huimin / Wu, Cheng / Fang, Daining	An experimental investigation on low-velocity impact response of a novel corrugated sandwiched composite structure	112676
Wu, Zhenyu / Wu, Chengjian / Liu, Yisheng / Cheng, Xiaoying / Hu, Xudong	Experimental study on the low-velocity impact response of braided composite panel: Effect of stacking sequence	112691
Harvey, Derek / Hubert, Pascal	Extensions of the coating approach for topology optimization of composite sandwich structures	112682
Geng, Kun / Xie, Wen / Chen, Bin / Yin, Qifang / Yuan, Yanan / Zhang, Zuoqi	Failure simulation and design optimization of bioinspired heterogeneous interfaces by Floquet-based bar-spring model	112665
Tian, Kuo / Huang, Lei / Sun, Yu / Du, Kaifan / Hao, Peng / Wang, Bo	Fast buckling load numerical prediction method for imperfect shells under axial compression based on POD and vibration correlation technique	112721
Ren, Sendong / Ma, Yunwu / Saeki, Shuhei / Iwamoto, Yoshiaki / Chen, Chuantong / Ma, Ninshu	Fracture mechanism and strength evaluation of Al5052/CFRP joint produced by coaxial one-side resistance spot welding	112766
Shafei, Erfan / Faroughi, Shirko / Reali, Alessandro	Geometrically nonlinear vibration of anisotropic composite beams using isogeometric third-order shear deformation theory	112627
Bouazza, Mokhtar / Zenkour, Ashraf M.	Hygro-thermo-mechanical buckling of laminated beam using hyperbolic refined shear deformation theory	112689
Wu, Zhangming / Li, Hao / Chen, Yuli	An improved model for unsymmetric plates	112622
Xing, Yufeng / Wang, Zekun	An improved separation-of-variable method for the free vibration of orthotropic rectangular thin plates	112664
Qi, Dexing / Hu, Wenxia / Xin, Kehao / Zeng, Qingliang / Xi, Li / Tao, Ran / Liao, Haitao / Deng, Yelin / Liao, Binbin / Wu, Wenwang	In-situ synchrotron X-ray tomography investigation of micro lattice manufactured with the projection micro-stereolithography (PμSL) 3D printing technique: Defects characterization and in-situ shear test	112710
Tan, Mengting / Zhang, Xianfeng / Bao, Kuo / Chen, Beibei	Investigation of stress distribution in multi-layered targets under impact load by using receding contact method	112703
Fallah Pour, Ali / Nguyen, Giang D. / Vincent, Thomas / Ozbakkaloglu, Togay	Investigation of the compressive behavior and failure modes of unconfined and FRP-confined concrete using digital image correlation	112642
Guo, Zhan / Xia, Lujing / Chen, Yu	Investigation on flexural behavior of double-layer toughened sandwich glass with trilateral simple support	112783
Tian, J. / Guo, Q. / Shi, G.	Laminated piezoelectric beam element for dynamic analysis of piezolaminated smart beams and GA-based LQR active vibration control	112480
Tang, Zhuo / Li, Wengui / Tam, Vivian W. Y. / Yan, Libo	Mechanical behaviors of CFRP-confined sustainable geopolymeric recycled aggregate concrete under both static and cyclic compressions	112750
Kinvi-Dossou, G. / Bonfoh, N. / Matadi Boumbimba, R. / Koutsawa, Y. / Lachaud, F. / Nyoungue, A. / Gérard, P.	A mesoscale modelling approach of glass fibre/Elium acrylic woven laminates for low velocity impact simulation	112671
Jiang, Zhengwen / Fang, Zhi / Wan, Shui	Mixed-mode I/II fracture behavior for adhesively-bonded pultruded GFRP joint under four-point bending	112763
Casalotti, Arnaldo / D'Annibale, Francesco / Rosi, Giuseppe	Multi-scale design of an architected composite structure with optimized graded properties	112608
Liu, Xin / Tao, Fei / Yu, Wenbin	A neural network enhanced system for learning nonlinear constitutive law and failure initiation criterion of composites using indirectly measurable data	112658
Trellu, A. / Bouvet, C. / Rivallant, S. / Ratsifandrihana, L.	A new interface element connecting 3D finite elements with non-coincident nodes to simulate delamination in composite laminates	112694
Cao, Pengyu / Niu, Kangmin	New unified model of composite sandwich panels/beams buckling introducing interlayer shear effects	112722
Fouaidi, Mustapha / Jamal, Mohammad / Belouaggadia, Naoual	Nonlinear bending analysis of functionally graded porous beams using the multiquadric radial basis functions and a Taylor series-based continuation procedure	112593
Zhu, Bo / Xu, Qi / Li, Ming / Li, Yinghui	Nonlinear free and forced vibrations of porous functionally graded pipes conveying fluid and resting on nonlinear elastic foundation	112672
Zhang, Zixiang / Liu, Airong / Yang, Jie / Pi, Yong-Lin / Huang, Yonghui / Fu, Jiyang	Nonlinear in-plane buckling of shallow laminated arches incorporating shear deformation under a uniform radial loading	112732
Kanani, Armin Yousefi / Hou, Xiaonan / Ye, Jianqiao	A novel dissimilar single-lap joint with interfacial stiffness improvement	112741
Apuzzo, Andrea / Bartolomeo, Chiara / Luciano, Raimondo / Scorza, Daniela	Novel local/nonlocal formulation of the stress-driven model through closed form solution for higher vibrations modes	112688
Liu, Hongwei / Zhang, Zhichun / Jia, Hongbo / Li, Quanlong / Liu, Yanju / Leng, Jinsong	A novel method to predict the stiffness evolution of in-service wind turbine blades based on deep learning models	112702
Qi, L. / Nagaraj, M. H. / Carrera, E. / Gao, C. F. / Petrolo, M.	Numerical analysis of disbonding in sandwich structures using 1D finite elements	112717
Liu, Y. / van der Meer, F. P. / Sluys, L. J. / Fan, J. T.	A numerical homogenization scheme used for derivation of a homogenized viscoelastic-viscoplastic model for the transverse response of fiber-reinforced polymer composites	112690
Fragassa, Cristiano / Pavlovic, Ana / Minak, Giangiacomo	On the structural behaviour of a CFRP safety cage in a solar powered electric vehicle	112698
Qi, Chang / Pei, Lian-Zheng / Remennikov, Alex / Yang, Shu / Liu, Jun / Wang, Jun-Shan / Liao, Xiang-Wei	Parametric study and optimization of the protect system containing a re-entrant hexagon cored sandwich panel under blast impact	112711
Falkowicz, Katarzyna / Debski, Hubert	The post-critical behaviour of compressed plate with non-standard play orientation	112701
Khardin, Mikhail / Harhash, Mohamed / Chernikov, Dmitrii / Glushchenkov, Vladimir / Palkowski, Heinz	Preliminary studies on electromagnetic forming of aluminum/polymer/aluminum sandwich sheets	112729
Mei, Haiyang / Han, Zhenyu / Liang, Shuangqiang / Ko, Frank K.	Process modelling of 3D hexagonal braids	112679
Mu, Wenlong / Na, Jingxin / Wang, Guangbin / Tan, Wei / Xu, Qianhui / Feng, Yao	Rapid prediction method of failure load for hygrothermally aged CFRP – Aluminum alloy single lap joints	112603
Krishna Mohan, P. R. / Anil Kumar, M. / Mohite, P. M.	Representative volume element generation and its size determination for discontinuous composites made from chopped prepregs	112633
Guo, Zhan / Wang, Jinpeng / Chen, Yu	Research on mechanical behavior of three-layer toughened sandwich glass with trilateral simple support	112738
He, Kang / Zhang, Xiaoyong / Chen, Yu	Research on vertical bearing capacity of circular concrete filled winding GFRP tubular columns after lateral impact	112753
Lopes Fernandes, Romina / Teixeira de Freitas, Sofia / Budzik, Michal K. / Poulis, Johannes A. / Benedictus, Rinze	Role of adherend material on the fracture of bi-material composite bonded joints	112643
Debski, H. / Rozylo, P. / Wysmulski, P.	Stability and load-carrying capacity of short open-section composite columns under eccentric compression loading	112716
Ren, Shuhui / Mahesh, Vinyas / Meng, Guangwei / Zhou, Liming	Static responses of magneto-electro-elastic structures in moisture field using stabilized node-based smoothed radial point interpolation method	112696
Akbarpour, S. / Hallström, S.	Strength improvement of bolted joints in composite materials by use of patched metal inserts	112628
Qin, Qinghua / Chen, Shangjun / Li, Kaikai / Jiang, Minqiang / Cui, Tianning / Zhang, Jianxun	Structural impact damage of metal honeycomb sandwich plates	112719
Chen, Zhen / Su, Yu-Chen / Rajendran, A. M. / Su, Hao / Liu, Yan / Jiang, Shan	Study of constituent effect on the failure response of fiber reinforced composites to impact loading with the material point method	112751
Ribeiro, Leonardo Gonçalves / Maia, Marina Alves / Parente Jr., Evandro / Cartaxo de Melo, Antônio Macário	Surrogate based optimization of functionally graded plates using radial basis functions	112677
Liu, Bo / Shi, Tao / Xing, Yufeng	Three-dimensional free vibration analyses of functionally graded laminated shells under thermal environment by a hierarchical quadrature element method	112733
Hao, WenYu / Guo, Ran / Han, Ning	A two dimensional VCFEM formulated with plastic, creep and thermal strain for simulate fatigue of porous material	112598
Xu, W. / Zhang, C. / Wu, X. R. / Yu, Y.	Weight function method and its application for orthotropic single edge notched specimens	112695

About this
data sheet
IssueID
37733
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - November 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - November 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.