Composite Structures - November 2020

Erschienen:	November 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Tao, Ran / Xi, Li / Wu, Wenwang / Li, Ying / Liao, Binbin / Liu, Liwu / Leng, Jinsong / Fang, Daining	4D printed multi-stable metamaterials with mechanically tunable performance	112663
Jain, D. / Zhao, Y. Q. / Batra, R. C.	Analysis of three-dimensional bending deformations and failure of wet and dry laminates	112687
Yaghoobi, Hessameddin / Taheri, Farid	Analytical solution and statistical analysis of buckling capacity of sandwich plates with uniform and non-uniform porous core reinforced with graphene nanoplatelets	112700
Pillai, Udit / Triantafyllou, Savvas P. / Essa, Yasser / de la Escalera, Federico Martin	An anisotropic cohesive phase field model for quasi-brittle fractures in thin fibre-reinforced composites	112635
Zhang, Rui / Qiang, Lu-Sheng / Han, Bin / Zhao, Zhen-yu / Zhang, Qian-Cheng / Ni, Chang-Ye / Lu, Tian Jian	Ballistic performance of UHMWPE laminated plates and UHMWPE encapsulated aluminum structures: Numerical simulation	112686
Nie, X. F. / Zhang, S. S. / Yu, T.	Behaviour of RC beams with a fibre-reinforced polymer (FRP)-strengthened web opening	112684
Wang, Xue / Shi, Xiao-long / Meng, Qing-kai / Hu, Ying-cheng / Wang, Li-hai	Bending behaviors of three grid sandwich structures with wood facing and jute fabrics/epoxy composites cores	112666
Amabili, Marco / Balasubramanian, Prabakaran / Garziera, Rinaldo / Royer-Carfagni, Gianni	Blast loads and nonlinear vibrations of laminated glass plates in an enhanced shear deformation theory	112720
Arteiro, Albertino / Sharma, Naresh / Melo, Jose Daniel D. / Ha, Sung Kyu / Miravete, Antonio / Miyano, Yasushi / Massard, Thierry / Shah, Pranav D. / Roy, Surajit / Rainsberger, Robert / Rother, Klemens / Cimini Jr., Carlos / Seng, Jocelyn M. / Arakaki, Francisco K. / Tay, Tong-Earn / Lee, Woo Il / Sihn, Sangwook / Springer, George S. / Roy, Ajit / Riccio, Aniello / Di Caprio, Francesco / Shrivastava, Sachin / Nettles, Alan T. / Catalanotti, Giuseppe / Camanho, Pedro P. / Seneviratne, Waruna / Marques, António T. / Yang, Henry T. / Thomas Hahn, H.	A case for Tsai’s Modulus, an invariant-based approach to stiffness	112683
Al-Furjan, M. S. H. / Habibi, Mostafa / Chen, Guojin / Safarpour, Hamed / Safarpour, Mehran / Tounsi, Abdelouahed	Chaotic oscillation of a multi-scale hybrid nano-composites reinforced disk under harmonic excitation via GDQM	112737
Daniel, Pierre M. / Främby, Johannes / Fagerström, Martin / Maimí, Pere	Complete transverse stress recovery model for linear shell elements in arbitrarily curved laminates	112675
Katunin, Andrzej / Pawlak, Sebastian / Wronkowicz-Katunin, Angelika / Tutajewicz, Dawid	Damage progression in fibre reinforced polymer composites subjected to low-velocity repeated impact loading	112735
Gong, Yanfeng / Shao, Hongliang / Luo, Jun / Li, Zhixue	A deep transfer learning model for inclusion defect detection of aeronautics composite materials	112681
Novak, Nejc / Dobnik Dubrovski, Polona / Borovinšek, Matej / Vesenjak, Matej / Ren, Zoran	Deformation behaviour of advanced textile composites with auxetic structure	112761
Ke, Jun / Wu, Zhen-Yu / Liu, Yi-sheng / Xiang, Zhong / Hu, Xu-dong	Design method, performance investigation and manufacturing process of composite helical springs: A review	112747
Hoang, Van-Nam / Tran, Phuong / Vu, Van-Tuyen / Nguyen-Xuan, H.	Design of lattice structures with direct multiscale topology optimization	112718
Namvar, A. R. / Vosoughi, A. R.	Design optimization of moderately thick hexagonal honeycomb sandwich plate with modified multi-objective particle swarm optimization by genetic algorithm (MOPSOGA)	112626
Allahkarami, Farshid / Ghassabzadeh Saryazdi, Maryam / Tohidi, Hasan	Dynamic buckling analysis of bi-directional functionally graded porous truncated conical shell with different boundary conditions	112680
Wang, Ben / Wang, Yufeng / Zhao, Hua / Sun, Lei / Wang, Minghai / Kong, Xianjun	Effect of a Ti alloy layer on CFRP hole quality during helical milling of CFRP/Ti laminate	112670
Zhang, Yifan / Guo, Qiwei / Chen, Xiaoming / Xie, Junbo / Chen, Li	Effect of apertures on tensile property of warp-reinforced 2.5D woven composites notched plates	112693
Deng, Fangqian / Xu, Lihua / Chi, Yin / Wu, Fanghong / Chen, Qian	Effect of steel-polypropylene hybrid fiber and coarse aggregate inclusion on the stress–strain behavior of ultra-high performance concrete under uniaxial compression	112685
Jiao, Wei / Chen, Li / Xie, Junbo / Yang, Zhi / Fang, Jing / Chen, Lei	Effect of weaving structures on the geometry variations and mechanical properties of 3D LTL woven composites	112756
Ren, Zhaokun / Liu, Liwu / Liu, Yanju / Leng, Jinsong	Electric power repair tools made of shape memory composites: Analysis and investigation	112712
Quan, Dong / Alderliesten, René / Dransfeld, Clemens / Murphy, Neal / Ivanković, Alojz / Benedictus, Rinze	Enhancing the fracture toughness of carbon fibre/epoxy composites by interleaving hybrid meltable/non-meltable thermoplastic veils	112699
Wannapa, N. / Uthaisangsuk, V.	Experimental and numerical failure analyses of dissimilar material joints between aluminium and thermoplastic	112762
Esmaeili, A. / Ma, D. / Manes, A. / Oggioni, T. / Jiménez-Suárez, A. / Ureña, A. / Hamouda, A. M. S. / Sbarufatti, C.	An experimental and numerical investigation of highly strong and tough epoxy based nanocomposite by addition of MWCNTs: Tensile and mode I fracture tests	112692
Demiral, Murat / Tanabi, Hamed / Sabuncuoglu, Baris	Experimental and numerical investigation of transverse shear behavior of glass-fibre composites with embedded vascular channel	112697
Zhao, Tian / Jiang, Yongbo / Zhu, Yangxuan / Wan, Zhishuai / Xiao, Dengbao / Li, Ying / Li, Huimin / Wu, Cheng / Fang, Daining	An experimental investigation on low-velocity impact response of a novel corrugated sandwiched composite structure	112676
Wu, Zhenyu / Wu, Chengjian / Liu, Yisheng / Cheng, Xiaoying / Hu, Xudong	Experimental study on the low-velocity impact response of braided composite panel: Effect of stacking sequence	112691
Harvey, Derek / Hubert, Pascal	Extensions of the coating approach for topology optimization of composite sandwich structures	112682
Geng, Kun / Xie, Wen / Chen, Bin / Yin, Qifang / Yuan, Yanan / Zhang, Zuoqi	Failure simulation and design optimization of bioinspired heterogeneous interfaces by Floquet-based bar-spring model	112665
Tian, Kuo / Huang, Lei / Sun, Yu / Du, Kaifan / Hao, Peng / Wang, Bo	Fast buckling load numerical prediction method for imperfect shells under axial compression based on POD and vibration correlation technique	112721
Ren, Sendong / Ma, Yunwu / Saeki, Shuhei / Iwamoto, Yoshiaki / Chen, Chuantong / Ma, Ninshu	Fracture mechanism and strength evaluation of Al5052/CFRP joint produced by coaxial one-side resistance spot welding	112766
Shafei, Erfan / Faroughi, Shirko / Reali, Alessandro	Geometrically nonlinear vibration of anisotropic composite beams using isogeometric third-order shear deformation theory	112627
Bouazza, Mokhtar / Zenkour, Ashraf M.	Hygro-thermo-mechanical buckling of laminated beam using hyperbolic refined shear deformation theory	112689
Wu, Zhangming / Li, Hao / Chen, Yuli	An improved model for unsymmetric plates	112622
Xing, Yufeng / Wang, Zekun	An improved separation-of-variable method for the free vibration of orthotropic rectangular thin plates	112664
Qi, Dexing / Hu, Wenxia / Xin, Kehao / Zeng, Qingliang / Xi, Li / Tao, Ran / Liao, Haitao / Deng, Yelin / Liao, Binbin / Wu, Wenwang	In-situ synchrotron X-ray tomography investigation of micro lattice manufactured with the projection micro-stereolithography (PμSL) 3D printing technique: Defects characterization and in-situ shear test	112710
Tan, Mengting / Zhang, Xianfeng / Bao, Kuo / Chen, Beibei	Investigation of stress distribution in multi-layered targets under impact load by using receding contact method	112703
Fallah Pour, Ali / Nguyen, Giang D. / Vincent, Thomas / Ozbakkaloglu, Togay	Investigation of the compressive behavior and failure modes of unconfined and FRP-confined concrete using digital image correlation	112642
Guo, Zhan / Xia, Lujing / Chen, Yu	Investigation on flexural behavior of double-layer toughened sandwich glass with trilateral simple support	112783
Tian, J. / Guo, Q. / Shi, G.	Laminated piezoelectric beam element for dynamic analysis of piezolaminated smart beams and GA-based LQR active vibration control	112480
Tang, Zhuo / Li, Wengui / Tam, Vivian W. Y. / Yan, Libo	Mechanical behaviors of CFRP-confined sustainable geopolymeric recycled aggregate concrete under both static and cyclic compressions	112750
Kinvi-Dossou, G. / Bonfoh, N. / Matadi Boumbimba, R. / Koutsawa, Y. / Lachaud, F. / Nyoungue, A. / Gérard, P.	A mesoscale modelling approach of glass fibre/Elium acrylic woven laminates for low velocity impact simulation	112671
Jiang, Zhengwen / Fang, Zhi / Wan, Shui	Mixed-mode I/II fracture behavior for adhesively-bonded pultruded GFRP joint under four-point bending	112763
Casalotti, Arnaldo / D'Annibale, Francesco / Rosi, Giuseppe	Multi-scale design of an architected composite structure with optimized graded properties	112608
Liu, Xin / Tao, Fei / Yu, Wenbin	A neural network enhanced system for learning nonlinear constitutive law and failure initiation criterion of composites using indirectly measurable data	112658
Trellu, A. / Bouvet, C. / Rivallant, S. / Ratsifandrihana, L.	A new interface element connecting 3D finite elements with non-coincident nodes to simulate delamination in composite laminates	112694
Cao, Pengyu / Niu, Kangmin	New unified model of composite sandwich panels/beams buckling introducing interlayer shear effects	112722
Fouaidi, Mustapha / Jamal, Mohammad / Belouaggadia, Naoual	Nonlinear bending analysis of functionally graded porous beams using the multiquadric radial basis functions and a Taylor series-based continuation procedure	112593
Zhu, Bo / Xu, Qi / Li, Ming / Li, Yinghui	Nonlinear free and forced vibrations of porous functionally graded pipes conveying fluid and resting on nonlinear elastic foundation	112672
Zhang, Zixiang / Liu, Airong / Yang, Jie / Pi, Yong-Lin / Huang, Yonghui / Fu, Jiyang	Nonlinear in-plane buckling of shallow laminated arches incorporating shear deformation under a uniform radial loading	112732
Kanani, Armin Yousefi / Hou, Xiaonan / Ye, Jianqiao	A novel dissimilar single-lap joint with interfacial stiffness improvement	112741
Apuzzo, Andrea / Bartolomeo, Chiara / Luciano, Raimondo / Scorza, Daniela	Novel local/nonlocal formulation of the stress-driven model through closed form solution for higher vibrations modes	112688
Liu, Hongwei / Zhang, Zhichun / Jia, Hongbo / Li, Quanlong / Liu, Yanju / Leng, Jinsong	A novel method to predict the stiffness evolution of in-service wind turbine blades based on deep learning models	112702
Qi, L. / Nagaraj, M. H. / Carrera, E. / Gao, C. F. / Petrolo, M.	Numerical analysis of disbonding in sandwich structures using 1D finite elements	112717
Liu, Y. / van der Meer, F. P. / Sluys, L. J. / Fan, J. T.	A numerical homogenization scheme used for derivation of a homogenized viscoelastic-viscoplastic model for the transverse response of fiber-reinforced polymer composites	112690
Fragassa, Cristiano / Pavlovic, Ana / Minak, Giangiacomo	On the structural behaviour of a CFRP safety cage in a solar powered electric vehicle	112698
Qi, Chang / Pei, Lian-Zheng / Remennikov, Alex / Yang, Shu / Liu, Jun / Wang, Jun-Shan / Liao, Xiang-Wei	Parametric study and optimization of the protect system containing a re-entrant hexagon cored sandwich panel under blast impact	112711
Falkowicz, Katarzyna / Debski, Hubert	The post-critical behaviour of compressed plate with non-standard play orientation	112701
Khardin, Mikhail / Harhash, Mohamed / Chernikov, Dmitrii / Glushchenkov, Vladimir / Palkowski, Heinz	Preliminary studies on electromagnetic forming of aluminum/polymer/aluminum sandwich sheets	112729
Mei, Haiyang / Han, Zhenyu / Liang, Shuangqiang / Ko, Frank K.	Process modelling of 3D hexagonal braids	112679
Mu, Wenlong / Na, Jingxin / Wang, Guangbin / Tan, Wei / Xu, Qianhui / Feng, Yao	Rapid prediction method of failure load for hygrothermally aged CFRP – Aluminum alloy single lap joints	112603
Krishna Mohan, P. R. / Anil Kumar, M. / Mohite, P. M.	Representative volume element generation and its size determination for discontinuous composites made from chopped prepregs	112633
Guo, Zhan / Wang, Jinpeng / Chen, Yu	Research on mechanical behavior of three-layer toughened sandwich glass with trilateral simple support	112738
He, Kang / Zhang, Xiaoyong / Chen, Yu	Research on vertical bearing capacity of circular concrete filled winding GFRP tubular columns after lateral impact	112753
Lopes Fernandes, Romina / Teixeira de Freitas, Sofia / Budzik, Michal K. / Poulis, Johannes A. / Benedictus, Rinze	Role of adherend material on the fracture of bi-material composite bonded joints	112643
Debski, H. / Rozylo, P. / Wysmulski, P.	Stability and load-carrying capacity of short open-section composite columns under eccentric compression loading	112716
Ren, Shuhui / Mahesh, Vinyas / Meng, Guangwei / Zhou, Liming	Static responses of magneto-electro-elastic structures in moisture field using stabilized node-based smoothed radial point interpolation method	112696
Akbarpour, S. / Hallström, S.	Strength improvement of bolted joints in composite materials by use of patched metal inserts	112628
Qin, Qinghua / Chen, Shangjun / Li, Kaikai / Jiang, Minqiang / Cui, Tianning / Zhang, Jianxun	Structural impact damage of metal honeycomb sandwich plates	112719
Chen, Zhen / Su, Yu-Chen / Rajendran, A. M. / Su, Hao / Liu, Yan / Jiang, Shan	Study of constituent effect on the failure response of fiber reinforced composites to impact loading with the material point method	112751
Ribeiro, Leonardo Gonçalves / Maia, Marina Alves / Parente Jr., Evandro / Cartaxo de Melo, Antônio Macário	Surrogate based optimization of functionally graded plates using radial basis functions	112677
Liu, Bo / Shi, Tao / Xing, Yufeng	Three-dimensional free vibration analyses of functionally graded laminated shells under thermal environment by a hierarchical quadrature element method	112733
Hao, WenYu / Guo, Ran / Han, Ning	A two dimensional VCFEM formulated with plastic, creep and thermal strain for simulate fatigue of porous material	112598
Xu, W. / Zhang, C. / Wu, X. R. / Yu, Y.	Weight function method and its application for orthotropic single edge notched specimens	112695

Über diese
Datenseite
IssueID
37733
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - November 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - November 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.