Composite Structures - December 2020

Published:	December 2020

Articles in this Issue

Author(s)	Title	Page(s)
Hao, Jingxin / Xu, Lei / Wu, Xinfeng / Li, Xianjun	Analysis and modeling of the dowel connection in wood T type joint for optimal performance	112754
Valvano, S. / Alaimo, A. / Orlando, C.	Analytical analysis of sound transmission in passive damped multilayered shells	112742
Garg, Nikhil / Prusty, B. Gangadhara / Ooi, Ean Tat / Song, Chongmin / Pearce, Garth / Phillips, Andrew W.	Application of scaled boundary finite element method for delamination analysis of composite laminates using cohesive zone modelling	112773
Qu, Kefo / Wu, Chengqing / Liu, Jian / Yao, Yong / Deng, Yongjun / Yi, Chenhong	Ballistic performance of multi-layered aluminium and UHMWPE fibre laminate targets subjected to hypervelocity impact by tungsten alloy ball	112785
Huang, Haoming / Wang, Wen / Cao, Taishan / Kuang, Jiacai / Deng, Yingjun / Hua, Manyu / Xie, Wei	Broadband radar absorbing performance of corrugated structure	112809
Wei, Qin / Zhu, Liyong / Zhu, Jianguo / Zhuo, Lijun / Hao, Wenfeng / Xie, Weihua	Characterization of impact fatigue damage in CFRP composites using nonlinear acoustic resonance method	112804
Jenabidehkordi, Ali / Abadi, Rouzbeh / Rabczuk, Timon	Computational modeling of meso-scale fracture in polymer matrix composites employing peridynamics	112740
Andraju, Lala Bahadur / Raju, Gangadharan	Continuum and cohesive zone damage models to study intra/inter-laminar failure of curved composite laminates under four-point bending	112768
Feil, Roland / Pflumm, Tobias / Bortolotti, Pietro / Morandini, Marco	A cross-sectional aeroelastic analysis and structural optimization tool for slender composite structures	112755
Li, Xiaoyang / Wang, Jihui / Li, Shuxin / Ding, Anxin	Cure-induced temperature gradient in laminated composite plate: Numerical simulation and experimental measurement	112822
Hisada, Shinsaku / Minakuchi, Shu / Takeda, Nobuo	Damage tolerance improvement of composite T-joint under pull-up conditions using an interlocking-fiber-based crack arrester	112792
Li, Jingrong / Lu, Ye / Lee, Yu Fung	Debonding detection in CFRP-reinforced steel structures using anti-symmetrical guided waves	112813
Chen, Tianyu / Harvey, Christopher M. / Wang, Simon / Silberschmidt, Vadim V.	Delamination propagation under high loading rate	112734
Mawkhlieng, Unsanhame / Majumdar, Abhijit	Designing of hybrid soft body armour using high-performance unidirectional and woven fabrics impregnated with shear thickening fluid	112776
Han, Juan / Wan, Chuqi / Fang, Hai / Bai, Yu	Development of self-floating fibre reinforced polymer composite structures for photovoltaic energy harvesting	112788
Zhu, Man / Gorbatikh, Larissa / Fonteyn, Sander / Van Hemelrijck, Danny / Pyl, Lincy / Carrella-Payan, Delphine / Lomov, Stepan V.	Digital image correlation assisted characterization of Mode I fatigue delamination in composites	112746
Wu, Chao / Zhang, Li-Teng / Tam, Lik-ho / Yan, Libo / He, Li	Effect of bearing length on web crippling behavior of pultruded GFRP channel section	112810
Shen, Hui-Shen / Xiang, Y. / Reddy, J. N.	Effect of negative Poisson’s ratio on the post-buckling behavior of FG-GRMMC laminated plates in thermal environments	112731
Karami, Elham / Bardet, Sandrine / Matsuo, Miyuki / Bremaud, Iris / Gaff, Milan / Gril, Joseph	Effects of mild hygrothermal treatment on the physical and vibrational properties of spruce wood	112736
Hoang, Vu Ngoc Viet / Minh, Vu Tri / Ninh, Dinh Gia / Nguyen, Cong Thanh / Huy, Vu Le	Effects of non-uniform elastic foundation on the nonlinear vibration of nanocomposite plates in thermal environment using Selvadurai methodology	112812
Jiang, Hongyong / Ren, Yiru / Liu, Xiaochuan / Jin, Qiduo	Enhancing residual energy-absorption of perforated CFRP tube by a critical transition of failure mechanism	112811
He, Kang / Chen, Yu	Experimental investigation of fire-exposed steel tubular stub columns wrapped with CFRP sheets	112807
Oz, Fatih E. / Calik, Emre / Ersoy, Nuri	Finite element analysis and acoustic emission monitoring of progressive failure of corrugated core composite structures	112775
Liu, Xi / Sun, Yijia / Wu, Tao / Liu, Yang	Flexural cracks in steel fiber-reinforced lightweight aggregate concrete beams reinforced with FRP bars	112752
Bharati, Raj B. / Filippi, M. / Mahato, Prashanta K. / Carrera, E.	Flutter analysis of laminated composite structures using Carrera Unified Formulation	112759
Anamagh, Mirmeysam Rafiei / Bediz, Bekir	Free vibration and buckling behavior of functionally graded porous plates reinforced by graphene platelets using spectral Chebyshev approach	112765
Klasztorny, Marian / Zajac, Kamil Pawel / Nycz, Daniel Bronislaw	GFRP composite footbridge series with multi-box cross section – Part 2: Local detailed design	112799
Gholami, Reza / Khoramishad, Hadi / da Silva, Lucas F. M.	Glass fiber-reinforced polymer nanocomposite adhesive joints reinforced with aligned carbon nanofillers	112814
Liu, Fengrui / Yao, Wanting / Zhao, Libin / Wu, Hao / Zhang, Xi / Zhang, Jianyu	An improved 2D finite element model for bolt load distribution analysis of composite multi-bolt single-lap joints	112770
Pathak, Abhishek K. / Yokozeki, Tomohiro / Imada, Masahiro / Kido, Kazuhiro	In-situ observation of tensile failure mode in cross-ply CFRP laminates using Talbot-Lau interferometry	112758
Ameryan, Ala / Ghalehnovi, Mansour / Rashki, Mohsen	Investigation of shear strength correlations and reliability assessments of sandwich structures by kriging method	112782
An, Qinglong / Dang, Jiaqiang / Li, Junli / Wang, Changying / Chen, Ming	Investigation on the cutting responses of CFRP/Ti stacks: With special emphasis on the effects of drilling sequences	112794
Obata, Sae / Takahashi, Kosuke / Inaba, Kazuaki	Laminate design for a tapered FRP structure with ply drop-off based on yielding of resin pockets	112787
Militello, C. / Bongiorno, F. / Epasto, G. / Zuccarello, B.	Low-velocity impact behaviour of green epoxy biocomposite laminates reinforced by sisal fibers	112744
Ferenc, Tomasz	Multiparameter sensitivity analysis of a GFRP composite footbridge of a sandwich structure and U-shaped cross-section	112793
Vignoli, Lucas L. / Savi, Marcelo A. / Pacheco, Pedro M. C. L. / Kalamkarov, Alexander L.	Multiscale approach to predict strength of notched composite plates	112827
Baek, Kyungmin / Lee, Wonseok / Shin, Hyunseong / Cho, Maenghyo	Multiscale study on determining representative volume elements size for mechanical behaviours of complex polymer nanocomposites with nanoparticulate agglomerations	112796
Kumar, Jogendra / Kumar Verma, Rajesh / Debnath, Kishore	A new approach to control the delamination and thrust force during drilling of polymer nanocomposites reinforced by graphene oxide/carbon fiber	112786
Vinyas, M. / Harursampath, D.	Nonlinear vibrations of magneto-electro-elastic doubly curved shells reinforced with carbon nanotubes	112749
Chen, Ming-Ming / Fu, Ming-Hui / Lan, Lin-Hua / Sheshenin, Sergey V.	A novel 3D structure with tunable Poisson’s ratio and tailorable coefficient of thermal expansion based on a tri-material triangle unit	112803
Arikoglu, Aytac / Ozturk, Ahmet Gokay	A novel approach for in-plane vibration and damping analysis of arbitrarily curved laminated composite and sandwich beams	112781
Yang, Guolin / Dong, Zhigang / Gao, Shang / Bao, Yan / Kang, Renke / Guo, Dongming	A novel reverse helical milling process for reducing push-out delamination of CFRP	112778
Gilson, L. / Imad, A. / Rabet, L. / Coghe, F.	On analysis of deformation and damage mechanisms of DYNEEMA composite under ballistic impact	112791
El Said, Bassam / Hallett, Stephen R.	Parametric failure manifolds for laminated composites	112798
Hu, Y. L. / Yu, Yin / Madenci, E.	Peridynamic modeling of composite laminates with material coupling and transverse shear deformation	112760
Ramezani, Mahyar / Kim, Young Hoon / Sun, Zhihui	Probabilistic model for flexural strength of carbon nanotube reinforced cement-based materials	112748
Ramaswamy, Karthik / O'Higgins, Ronan M. / Corbett, Michael C. / McCarthy, Michael A. / McCarthy, Conor T.	Quasi-static and dynamic performance of novel interlocked hybrid metal-composite joints	112769
Capozucca, R. / Magagnini, E.	RC beam models damaged and strengthened with GFRP strips under bending loading and free vibration	112730
Li, Ming-hang / Li, Bing / Zhang, Zhi-yuan / Gao, Guang-yuan	Reflection analysis for Stoneley waves encountering interfacial delamination	112771
Tomczyk, Barbara / Bagdasaryan, Vazgen / Gołąbczak, Marcin / Litawska, Anna	Stability of thin micro-periodic cylindrical shells; extended tolerance modelling	112743
de Sá, Filipe R. G. / Silva, Flávio de A. / Cardoso, Daniel C. T.	Tensile and flexural performance of concrete members reinforced with polypropylene fibers and GFRP bars	112784
Kumar, Ranvijay / Singh, Rupinder / Ahuja, IPS / Fortunato, Antonio	Thermo-mechanical investigations for the joining of thermoplastic composite structures via friction stir spot welding	112772
Qi, Yi-Nan / Dai, Hong-Liang / Deng, Shao-Ting	Thermoelastic analysis of stiffened sandwich doubly curved plate with FGM core under low velocity impact	112826
Turvey, G. J. / Milburn, J.	Two-bay pultruded GFRP safety Barrier/Guardrail – Testing, analysis and compliance with standards	112745
Lin, Alexander / Kiat Tan, Yu / Wang, Chi-Hwa / Kua, Harn Wei / Taylor, Hayden	Utilization of waste materials in a novel mortar–polymer laminar composite to be applied in construction 3D-printing	112764

About this
data sheet
IssueID
37732
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - December 2020

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - December 2020

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.