Composite Structures - Dezember 2020

Erschienen:	Dezember 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Hao, Jingxin / Xu, Lei / Wu, Xinfeng / Li, Xianjun	Analysis and modeling of the dowel connection in wood T type joint for optimal performance	112754
Valvano, S. / Alaimo, A. / Orlando, C.	Analytical analysis of sound transmission in passive damped multilayered shells	112742
Garg, Nikhil / Prusty, B. Gangadhara / Ooi, Ean Tat / Song, Chongmin / Pearce, Garth / Phillips, Andrew W.	Application of scaled boundary finite element method for delamination analysis of composite laminates using cohesive zone modelling	112773
Qu, Kefo / Wu, Chengqing / Liu, Jian / Yao, Yong / Deng, Yongjun / Yi, Chenhong	Ballistic performance of multi-layered aluminium and UHMWPE fibre laminate targets subjected to hypervelocity impact by tungsten alloy ball	112785
Huang, Haoming / Wang, Wen / Cao, Taishan / Kuang, Jiacai / Deng, Yingjun / Hua, Manyu / Xie, Wei	Broadband radar absorbing performance of corrugated structure	112809
Wei, Qin / Zhu, Liyong / Zhu, Jianguo / Zhuo, Lijun / Hao, Wenfeng / Xie, Weihua	Characterization of impact fatigue damage in CFRP composites using nonlinear acoustic resonance method	112804
Jenabidehkordi, Ali / Abadi, Rouzbeh / Rabczuk, Timon	Computational modeling of meso-scale fracture in polymer matrix composites employing peridynamics	112740
Andraju, Lala Bahadur / Raju, Gangadharan	Continuum and cohesive zone damage models to study intra/inter-laminar failure of curved composite laminates under four-point bending	112768
Feil, Roland / Pflumm, Tobias / Bortolotti, Pietro / Morandini, Marco	A cross-sectional aeroelastic analysis and structural optimization tool for slender composite structures	112755
Li, Xiaoyang / Wang, Jihui / Li, Shuxin / Ding, Anxin	Cure-induced temperature gradient in laminated composite plate: Numerical simulation and experimental measurement	112822
Hisada, Shinsaku / Minakuchi, Shu / Takeda, Nobuo	Damage tolerance improvement of composite T-joint under pull-up conditions using an interlocking-fiber-based crack arrester	112792
Li, Jingrong / Lu, Ye / Lee, Yu Fung	Debonding detection in CFRP-reinforced steel structures using anti-symmetrical guided waves	112813
Chen, Tianyu / Harvey, Christopher M. / Wang, Simon / Silberschmidt, Vadim V.	Delamination propagation under high loading rate	112734
Mawkhlieng, Unsanhame / Majumdar, Abhijit	Designing of hybrid soft body armour using high-performance unidirectional and woven fabrics impregnated with shear thickening fluid	112776
Han, Juan / Wan, Chuqi / Fang, Hai / Bai, Yu	Development of self-floating fibre reinforced polymer composite structures for photovoltaic energy harvesting	112788
Zhu, Man / Gorbatikh, Larissa / Fonteyn, Sander / Van Hemelrijck, Danny / Pyl, Lincy / Carrella-Payan, Delphine / Lomov, Stepan V.	Digital image correlation assisted characterization of Mode I fatigue delamination in composites	112746
Wu, Chao / Zhang, Li-Teng / Tam, Lik-ho / Yan, Libo / He, Li	Effect of bearing length on web crippling behavior of pultruded GFRP channel section	112810
Shen, Hui-Shen / Xiang, Y. / Reddy, J. N.	Effect of negative Poisson’s ratio on the post-buckling behavior of FG-GRMMC laminated plates in thermal environments	112731
Karami, Elham / Bardet, Sandrine / Matsuo, Miyuki / Bremaud, Iris / Gaff, Milan / Gril, Joseph	Effects of mild hygrothermal treatment on the physical and vibrational properties of spruce wood	112736
Hoang, Vu Ngoc Viet / Minh, Vu Tri / Ninh, Dinh Gia / Nguyen, Cong Thanh / Huy, Vu Le	Effects of non-uniform elastic foundation on the nonlinear vibration of nanocomposite plates in thermal environment using Selvadurai methodology	112812
Jiang, Hongyong / Ren, Yiru / Liu, Xiaochuan / Jin, Qiduo	Enhancing residual energy-absorption of perforated CFRP tube by a critical transition of failure mechanism	112811
He, Kang / Chen, Yu	Experimental investigation of fire-exposed steel tubular stub columns wrapped with CFRP sheets	112807
Oz, Fatih E. / Calik, Emre / Ersoy, Nuri	Finite element analysis and acoustic emission monitoring of progressive failure of corrugated core composite structures	112775
Liu, Xi / Sun, Yijia / Wu, Tao / Liu, Yang	Flexural cracks in steel fiber-reinforced lightweight aggregate concrete beams reinforced with FRP bars	112752
Bharati, Raj B. / Filippi, M. / Mahato, Prashanta K. / Carrera, E.	Flutter analysis of laminated composite structures using Carrera Unified Formulation	112759
Anamagh, Mirmeysam Rafiei / Bediz, Bekir	Free vibration and buckling behavior of functionally graded porous plates reinforced by graphene platelets using spectral Chebyshev approach	112765
Klasztorny, Marian / Zajac, Kamil Pawel / Nycz, Daniel Bronislaw	GFRP composite footbridge series with multi-box cross section – Part 2: Local detailed design	112799
Gholami, Reza / Khoramishad, Hadi / da Silva, Lucas F. M.	Glass fiber-reinforced polymer nanocomposite adhesive joints reinforced with aligned carbon nanofillers	112814
Liu, Fengrui / Yao, Wanting / Zhao, Libin / Wu, Hao / Zhang, Xi / Zhang, Jianyu	An improved 2D finite element model for bolt load distribution analysis of composite multi-bolt single-lap joints	112770
Pathak, Abhishek K. / Yokozeki, Tomohiro / Imada, Masahiro / Kido, Kazuhiro	In-situ observation of tensile failure mode in cross-ply CFRP laminates using Talbot-Lau interferometry	112758
Ameryan, Ala / Ghalehnovi, Mansour / Rashki, Mohsen	Investigation of shear strength correlations and reliability assessments of sandwich structures by kriging method	112782
An, Qinglong / Dang, Jiaqiang / Li, Junli / Wang, Changying / Chen, Ming	Investigation on the cutting responses of CFRP/Ti stacks: With special emphasis on the effects of drilling sequences	112794
Obata, Sae / Takahashi, Kosuke / Inaba, Kazuaki	Laminate design for a tapered FRP structure with ply drop-off based on yielding of resin pockets	112787
Militello, C. / Bongiorno, F. / Epasto, G. / Zuccarello, B.	Low-velocity impact behaviour of green epoxy biocomposite laminates reinforced by sisal fibers	112744
Ferenc, Tomasz	Multiparameter sensitivity analysis of a GFRP composite footbridge of a sandwich structure and U-shaped cross-section	112793
Vignoli, Lucas L. / Savi, Marcelo A. / Pacheco, Pedro M. C. L. / Kalamkarov, Alexander L.	Multiscale approach to predict strength of notched composite plates	112827
Baek, Kyungmin / Lee, Wonseok / Shin, Hyunseong / Cho, Maenghyo	Multiscale study on determining representative volume elements size for mechanical behaviours of complex polymer nanocomposites with nanoparticulate agglomerations	112796
Kumar, Jogendra / Kumar Verma, Rajesh / Debnath, Kishore	A new approach to control the delamination and thrust force during drilling of polymer nanocomposites reinforced by graphene oxide/carbon fiber	112786
Vinyas, M. / Harursampath, D.	Nonlinear vibrations of magneto-electro-elastic doubly curved shells reinforced with carbon nanotubes	112749
Chen, Ming-Ming / Fu, Ming-Hui / Lan, Lin-Hua / Sheshenin, Sergey V.	A novel 3D structure with tunable Poisson’s ratio and tailorable coefficient of thermal expansion based on a tri-material triangle unit	112803
Arikoglu, Aytac / Ozturk, Ahmet Gokay	A novel approach for in-plane vibration and damping analysis of arbitrarily curved laminated composite and sandwich beams	112781
Yang, Guolin / Dong, Zhigang / Gao, Shang / Bao, Yan / Kang, Renke / Guo, Dongming	A novel reverse helical milling process for reducing push-out delamination of CFRP	112778
Gilson, L. / Imad, A. / Rabet, L. / Coghe, F.	On analysis of deformation and damage mechanisms of DYNEEMA composite under ballistic impact	112791
El Said, Bassam / Hallett, Stephen R.	Parametric failure manifolds for laminated composites	112798
Hu, Y. L. / Yu, Yin / Madenci, E.	Peridynamic modeling of composite laminates with material coupling and transverse shear deformation	112760
Ramezani, Mahyar / Kim, Young Hoon / Sun, Zhihui	Probabilistic model for flexural strength of carbon nanotube reinforced cement-based materials	112748
Ramaswamy, Karthik / O'Higgins, Ronan M. / Corbett, Michael C. / McCarthy, Michael A. / McCarthy, Conor T.	Quasi-static and dynamic performance of novel interlocked hybrid metal-composite joints	112769
Capozucca, R. / Magagnini, E.	RC beam models damaged and strengthened with GFRP strips under bending loading and free vibration	112730
Li, Ming-hang / Li, Bing / Zhang, Zhi-yuan / Gao, Guang-yuan	Reflection analysis for Stoneley waves encountering interfacial delamination	112771
Tomczyk, Barbara / Bagdasaryan, Vazgen / Gołąbczak, Marcin / Litawska, Anna	Stability of thin micro-periodic cylindrical shells; extended tolerance modelling	112743
de Sá, Filipe R. G. / Silva, Flávio de A. / Cardoso, Daniel C. T.	Tensile and flexural performance of concrete members reinforced with polypropylene fibers and GFRP bars	112784
Kumar, Ranvijay / Singh, Rupinder / Ahuja, IPS / Fortunato, Antonio	Thermo-mechanical investigations for the joining of thermoplastic composite structures via friction stir spot welding	112772
Qi, Yi-Nan / Dai, Hong-Liang / Deng, Shao-Ting	Thermoelastic analysis of stiffened sandwich doubly curved plate with FGM core under low velocity impact	112826
Turvey, G. J. / Milburn, J.	Two-bay pultruded GFRP safety Barrier/Guardrail – Testing, analysis and compliance with standards	112745
Lin, Alexander / Kiat Tan, Yu / Wang, Chi-Hwa / Kua, Harn Wei / Taylor, Hayden	Utilization of waste materials in a novel mortar–polymer laminar composite to be applied in construction 3D-printing	112764

Über diese
Datenseite
IssueID
37732
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - Dezember 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Dezember 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.