Asian Journal of Civil Engineering - v. 26, n. 2 (November 2024)

Published:	November 2024

Articles in this Issue

Author(s)	Title	Page(s)
Hayatdavoodi, Aliakbar / Li, Yancheng	An analytical method to determine the ultimate shear strength of continuous steel plate girders	565-575
Sulub, Abdikarim Said / Eirgash, Mohammad Azim / Toğan, Vedat	An arithmetic optimization algorithm based on opposition jumping rate for time cost trade-off optimization problems	867-886
George, Christo / Kumar, Rakesh / Ramaraju, H. K.	Comparison of experimental and analytical studies in light gauge steel sections on CFST using SFRC in beams subjected to high temperatures	667-681
Sharma, Anirudh / Meena, Ram Vilas	Development and performance evaluation of high-performance concrete enhanced with styrene-butadiene rubber	777-794
Tajik, Nima / Marmarchinia, Saba / Mahmoudian, Alireza / Asghari, Abazar / Mirghaderi, Seyed Rasoul	The effect of multi-pass welding on residual stresses in fillet welded built-up steel box sections	955-974
Sonker, Maheshwari / Shanker, Rama	Enhanced diagnostic approach for multiple damage detection and severity evaluation through EMI-based sensing and artificial neural network model	747-760
Abrahimi, Ahmadshah / Bhikshma, V.	Experimental investigation on mechanical properties of lightweight reactive powder concrete using lightweight expanded clay sand	913-930
Ahmed, Ahmed Ramadan / Temimi, Feras A. R. / Yermoshin, N. A.	Experimental verification of the compressive stiffness of high-damping rubber bearings (HDRB) according to STN EN 1337-3 and their effectiveness in seismic isolation for cable-stayed bridges	719-729
Sobuz, Md. Habibur Rahman / Khatun, Mita / Kabbo, Md. Kawsarul Islam / Sutan, Norsuzailina Mohamed	An explainable machine learning model for encompassing the mechanical strength of polymer-modified concrete	931-954
Subedi, Ajaya / Thapa, Bhum Bahadur / Poudel, Ashish / Adhikari, Binaya / Khadka, Binod / Poudel, Samrat / Sapkota, Sanjog Chhetri	Exploring the potential of Himalayan Giant Nettle fiber and supplementary cementitious materials for sustainable concrete development	635-648
Abuassi, Mu’taz / almahameed, Bader aldeen / Bisharah, Majdi / Da’abis, Mo’ath Abu	A hybrid light GBM and Harris Hawks optimization approach for forecasting construction project performance: enhancing schedule and budget predictions	577-591
Meena, Rahul Kumar / Pratap, Ajay / Raj, Ritu / Anbukumar, S.	Influence of corner geometry on wind-induced forces in tall building models	593-616
Abu-Shaikha, Ma’in F. / Al-Karablieh, Mutasem A. / Musa, Akram M. / Almashayikh, Maryam I. / Al-Abed, Razan Y.	Integrating machine learning in digital architecture: enhancing sustainable design and energy efficiency in urban environments	813-827
Hussein, Mayyadah Fahmi / Arabasy, Mazin / Abukeshek, Mohammad / Shraa, Tamer	Metaheuristic machine learning for optimizing sustainable interior design: enhancing aesthetic and functional rehabilitation in housing projects	829-842
Singh, Sandeep / Meena, Y. R. / Rapeti, Srinivasa Rao / Kedia, Navin / Issa, Salman Khalaf / Abbas, Haider M.	Modeling compressive strength and environmental impact points of fly ash-admixed concrete using data-driven approaches	795-811
Oyebisi, Solomon / Shammas, Mahaad Issa / Oladeji, Samuel Olawale / Sani, Reuben	Modelling mechanical strengths of blended cement concrete incorporating corncob ash and calcite powder: experimental and machine learning approaches	453-470
Walimbe, Sonali / Nandineni, Rama Devi / Rege, Sumita	Multi-objective optimization of school environments to foster nature connectedness using NSGA-III in school design	515-530
Smahi, Rebiha / Bouafia, Youcef	A new model for monitoring nonlinear elastic behavior of reinforced concrete structures	887-912
Hussein, Assal / Heyliger, Paul	On the accuracy of CEL blast simulations: validation and application	843-866
Singh, Sabhilesh / Anand, Vivek	Optimizing self-compacting concrete with steel slag and fiber additions: enhancing fresh, mechanical, durability, and microstructural properties	683-699
Pande, Prashant B. / Dhengare, Sagar W. / Raut, Jayant M. / Bhagat, Rajesh M. / Bahoria, Boskey V. / Shelke, Nilesh / Upadhye, Sachin D. / Vairagade, Vikrant S.	Optimizing sustainability and resilience of composite construction materials using life cycle assessment and advanced artificial intelligence techniques	471-489
Behera, Amir Prasad / Dhawan, Amit / Rathinakumar, V. / Bharadwaj, Manish / Rajput, Jay Singh / Sethi, Krushna Chandra	Optimizing time, cost, environmental impact, and client satisfaction in sustainable construction projects using LHS-NSGA-III: a multi-objective approach	761-776
Dejin, Chen / S. Zainal, S. M. Iqbal / Dullah, Salinah / Rizalman, Ahmad Nurfaidhi / Harith, Noor Sheena Herayani	Performance of perforated double steel plate reinforcements in composite shear walls under axial compression	531-548
Hoque, Md Ahatasamul / Shrestha, Ajad / Sapkota, Sanjog Chhetri / Ahmed, Asif / Paudel, Satish	Prediction of autogenous shrinkage in ultra-high-performance concrete (UHPC) using hybridized machine learning	649-665
Sonker, Maheshwari / Shanker, Rama	Prediction of durability of the concrete using electro-mechanical impendence technique: an experimental and machine learning approaches	701-717
Gahlot, Sumit / Mangal, Rajat / Arya, Abhishek / Sethy, Barada Prasad / Sethi, Krushna Chandra	Prediction of swelling pressure of expansive soil using machine learning methods	549-564
Mishra, Mihir	Quantifying compressive strength in limestone powder incorporated concrete with incorporating various machine learning algorithms with SHAP analysis	731-746
Patil, Ashwini R. / Daterao, Smita / Jayale, Vivek	Seismic response control of RC structure using U- shape damper as isolator	505-514
Tank, Yati R. / Vesmawala, G. R.	Serviceability assessment of lively skywalk footbridge under dynamic loadings of human motions in the vadodara metropolitan area	617-634
Sasikumar, P. / Govindh, M. A. / Subitha, T. / Ananthakumar, A.	A study on the flexural behaviour and self-healing of fibre reinforced bacterial concrete beams	491-503

About this
data sheet
IssueID
75191
Published on:
27/01/2025
Last updated on:
27/01/2025

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Asian Journal of Civil Engineering - v. 26, n. 2 (November 2024)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Asian Journal of Civil Engineering - v. 26, n. 2 (November 2024)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.