0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Laboratory and Environmental Assessment of Asphalt Mixture Modified with a Compound of Reclaimed Asphalt Pavement and Waste Polyethylene

Author(s):
ORCID

ORCID
Medium: journal article
Language(s): English
Published in: Buildings, , n. 5, v. 14
Page(s): 1186
DOI: 10.3390/buildings14051186
Abstract:

The use of reclaimed asphalt pavement (RAP) in manufacturing asphalt concrete has become indispensable all over the world. This is due to the limited number of areas that are required to stockpile scraped pavement, as well as a lack of natural aggregate, which is necessary in manufacturing asphalt concrete. Thus, this research aims to evaluate the mechanical characteristics and environmental impact of using RAP and waste polyethylene in hot mix asphalt (HMA). RAP was added to hot mix asphalt in proportions of 25%, 50%, 75%, and 100% instead of the same amount of coarse aggregate. Then, the optimum RAP hot mix asphalt was modified by adding polyethylene in proportions of 1%, 2%, 3%, and 4% into the hot mix asphalt. The Marshall mix design was used to define the optimum asphalt content. As a final point in this experimental work, tests on the loss of stability, indirect tensile strength, and wheel loading tracking were performed to assess the performance of asphalt mixes modified with RAP and polyethylene in different conditions. A life cycle assessment (LCA) was applied using the ReCipe 2016 Endpoint method to evaluate the environmental impacts of these mixtures using the SimaPro software, V9.1. The laboratory tests showed that the mixture containing 50% RAP instead of the same amount of coarse aggregate and 2% polyethylene recorded better Marshall characteristics than the control mixture and the mixture with RAP alone. Finally, the modified hot mix asphalt with added RAP and polyethylene not only achieved superior performance in rutting, water damage resistance, and the stiffness modulus of bituminous mixtures, but it has been verified that there is no serious risk to the environment.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10774024
  • Published on:
    29/04/2024
  • Last updated on:
    05/06/2024
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine