Influence of Rock Block Content on Mechanical Properties of Coarse-Grained Fillers Stabilized with Fiber and Geopolymer

This study employed fiber and geopolymer to enhance the engineering performance of coarse-grained fillers. By conducting a series of comparative mechanical tests, the ideal mass mixing ratio design of geopolymer and fiber was investigated first. Then, the influence of rock block content on the mechanical properties of coarse-grained fillers stabilized with fiber and geopolymer was explored. The deformation damage characteristics of fiber- and geopolymer-stabilized coarse-grained fillers with different rock block contents were also discussed in the final test. The results show that the ideal mass mixing ratio of geopolymer for coarse-grained filler stabilization was 15% of dry fine-grained soil in weight and the ideal dosage and length of fiber was 0.4% of dry fine-grained soil in weight and 1.2 × 10−2 m. The compressive strength of fiber- and geopolymer-stabilized coarse-grained fillers shows a tendency to increase first, then decrease, and then re-increase with the increase in rock block contents. The best compressive strength and resistance to deformation were achieved when the rock block content was 30%. The failure mode of fiber- and geopolymer-stabilized coarse-grained fillers translated from shearing slip to vertical splitting as the rock block content increased. This study can provide a reference and support for the engineering application of coarse-grained fillers stabilized with fiber and geopolymer.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.