Impermeability Durability of SCC Reinforced with Fibrillated Polypropylene Fiber
Author(s): |
X. B. He
Y. Li Q. Shen |
---|---|
Medium: | journal article |
Language(s): | English |
Published in: | The Open Civil Engineering Journal, March 2016, n. 1, v. 9 |
Page(s): | 159-166 |
DOI: | 10.2174/1874149501509010159 |
Abstract: |
The paper studied the influences of the volume content and slenderness ratio of fibrillated polypropylene fiber on the impermeability durability of self-consolidating concrete (SCC) reinforced with the fibrillated polypropylene fiber, and proposed to use the modified relative permeability coefficient method to evaluate the water-resistant properties of SCC reinforced with the fiber. Also, the influence mechanism of the fiber on the permeability of the concrete has been analyzed according to the mercury injection test, scanning electronic microscope (SEM) observation and the basic principles of fracture mechanics. Results showed that: 1) the total porosity of SCC gradually increased with the increase in the fiber content; 2) the harmful porosity of SCC decreased firstly and then increased with the increase in the fiber content, while the harmful porosity increased with the increase in the fiber length; 3) when the reference mix proportion of SCC was kept constant, the fiber volume content was not more than 0.10 %, and the appropriate fiber length ranged from 12 to 15mm; 4) when the volume content is no more than 0.15%, the hardened SCC reinforced with fibrillated polypropylene fiber possessed good water impermeability gradation (>P12); the splitting strength and flexural tensile strength of the hardened SCC reinforced with fibrillated polypropylene fiber increased with the addition of the fiber content; the relative water penetration coefficient of the hardened SCC reinforced with fibrillated polypropylene fiber decreased with the addition of the fiber content firstly and then increased; the Coulomb value first increased smoothly (the maximum Coulomb value is less than 2000C, and low according to JTJ/T 193-2009 and ASTM C 1202), and then increased sharply. |
Copyright: | © 2016 X.B. He et al. |
License: | This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met. |
1.2 MB
- About this
data sheet - Reference-ID
10175643 - Published on:
30/12/2018 - Last updated on:
02/06/2021