0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Experimental Study of Envelope Airtightness in New Egyptian Residential Dwellings

Author(s): ORCID
ORCID
ORCID
Medium: journal article
Language(s): English
Published in: Buildings, , n. 3, v. 13
Page(s): 728
DOI: 10.3390/buildings13030728
Abstract:

In residential buildings, air infiltration impacts energy, indoor air quality, and thermal comfort considerably. While air infiltration in residential buildings has been the focus of many studies, most published field-testing results pertain to developed countries, with little or no data on air infiltration in developing nations. This paper presents the results of one of the first field investigations into envelope infiltration in the residential buildings of the hot-arid climatic area of Egypt. To analyze the air permeability of the building envelope, the fan pressurization method, often known as the blower door test (BDT), is used, following ISO 9772. The study focuses on 20 residential dwellings built with heavy construction materials and subjects them to extensive characterization and testing. The average air leakage and the air permeability rate for the tested sample were 6.14 h−1 and 17.3 m³/(h∙m²), respectively. However, significant variations in airtightness were observed across the dwelling, leading the team to test several building-related parameters statistically to study their impact on airtightness. Fenestration quality appeared to be a critical factor in determining air infiltration, showing a strong correlation with the air change and leakage. A further investigation underscored that the specific aperture factor and the fenestration quality can predict the infiltration rates to a large degree. Thus, we recommend further investigation of these characteristics in heavy construction material building. Finally, we strongly recommend that building codes in developing countries such as Egypt include minimum performance requirements for fenestration.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10712350
  • Published on:
    21/03/2023
  • Last updated on:
    10/05/2023
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine