0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Experimental Study of Envelope Airtightness in New Egyptian Residential Dwellings

Auteur(s): ORCID
ORCID
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 3, v. 13
Page(s): 728
DOI: 10.3390/buildings13030728
Abstrait:

In residential buildings, air infiltration impacts energy, indoor air quality, and thermal comfort considerably. While air infiltration in residential buildings has been the focus of many studies, most published field-testing results pertain to developed countries, with little or no data on air infiltration in developing nations. This paper presents the results of one of the first field investigations into envelope infiltration in the residential buildings of the hot-arid climatic area of Egypt. To analyze the air permeability of the building envelope, the fan pressurization method, often known as the blower door test (BDT), is used, following ISO 9772. The study focuses on 20 residential dwellings built with heavy construction materials and subjects them to extensive characterization and testing. The average air leakage and the air permeability rate for the tested sample were 6.14 h−1 and 17.3 m³/(h∙m²), respectively. However, significant variations in airtightness were observed across the dwelling, leading the team to test several building-related parameters statistically to study their impact on airtightness. Fenestration quality appeared to be a critical factor in determining air infiltration, showing a strong correlation with the air change and leakage. A further investigation underscored that the specific aperture factor and the fenestration quality can predict the infiltration rates to a large degree. Thus, we recommend further investigation of these characteristics in heavy construction material building. Finally, we strongly recommend that building codes in developing countries such as Egypt include minimum performance requirements for fenestration.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10712350
  • Publié(e) le:
    21.03.2023
  • Modifié(e) le:
    10.05.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine