0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Durability Evaluation of GGBS-RHA-Based Geopolymer Concrete Along with Lightweight Expanded Clay Aggregate Using SEM Images and EDAX Analysis

Author(s): ORCID
ORCID
Medium: journal article
Language(s): English
Published in: Buildings, , n. 11, v. 14
Page(s): 3355
DOI: 10.3390/buildings14113355
Abstract:

The durability of geopolymer concrete containing Ground Granulated Blast Furnace Slag (GGBS) and Rice Husk Ash (RHA), along with Lightweight Expanded Clay Aggregate (LECA), was investigated. Six different LWGPC mixtures were made with NaOH molarities of 8, 10, and 12M. For each molarity, two combinations of source materials were selected: 100% GGBS (G) and 80% GGBS with 20% RHA (RG). In all the mixtures, coarse aggregate was substituted with 35% LECA. LWGPC mixtures were exposed to 3% HCl, 5% MgSO4, and 3.5% NaCl for studying the durability properties. The test results demonstrate that 100% GGBS with 12M NaOH (12G) outperformed all other mixtures. The residual compressive strength of 12G mix LWGPC specimens after six months of exposure was found to be 86.4% in an acid environment, 90.6% in a sulfate environment, and 91.4% in a salt environment. The elemental composition analyzed using EDAX reveals that silica, alumina, calcium, and sodium are the predominant elements that form a dense microstructure with N-A-S-H, C-A-S-H, and C-S-H. Further, the inner properties of the specimens exposed to chemicals were examined using MATLAB R2023b and ImageJ 1.54f based on SEM images. The SEM image showed that the porosity of LWGPC specimens ranged from 0.5194 to 0.6748 µm, signifying an enhanced durability performance. The experimental results and microstructural analysis show that the LWGPC incorporating RHA and GGBS with LECA offers a superior performance, making it a promising solution for sustainable and durable construction.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10804635
  • Published on:
    10/11/2024
  • Last updated on:
    25/01/2025
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine