Comparative Analysis of RC Irregular Buildings Designed According to Different Seismic Design Codes
Author(s): |
Jaime Landingin
Hugo Rodrigues Humberto Varum António Arêde Aníbal Costa |
---|---|
Medium: | journal article |
Language(s): | English |
Published in: | The Open Construction and Building Technology Journal, December 2013, n. 1, v. 7 |
Page(s): | 221-229 |
DOI: | 10.2174/1874836801307010221 |
Abstract: |
The present paper presents a comparison of seismic provisions of three seismic design codes, the Philippine code, Eurocode 8 and the American code, to the most common ordinary residential frames of standard occupancy. Regular and irregular reinforced concrete frames were analyzed and compared for four storey building types. The response spectrum and the seismic parameters of NSCP 2010 were considered for the horizontal load action with different load combinations. Response spectrum analysis and equivalent lateral force analysis were performed using SAP2000 software package. Five representative columns for each RC frame structure were analyzed. Based on the results of column axial load - bending moment interaction diagrams, EC8 was found to be conservative when compared to NSCP 2010 and 2009 IBC. The conclusion is that for the design and analysis of ordinary RC residential buildings with certain irregularity, EC8 provisions were considered to be safer. |
Copyright: | © 2013 Jaime Landingin, Hugo Rodrigues, Humberto Varum, António Arêde, Aníbal Costa |
License: | This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met. |
1.57 MB
- About this
data sheet - Reference-ID
10384630 - Published on:
23/11/2019 - Last updated on:
02/06/2021