Comparative Analysis of RC Irregular Buildings Designed According to Different Seismic Design Codes
Autor(en): |
Jaime Landingin
Hugo Rodrigues Humberto Varum António Arêde Aníbal Costa |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | The Open Construction and Building Technology Journal, Dezember 2013, n. 1, v. 7 |
Seite(n): | 221-229 |
DOI: | 10.2174/1874836801307010221 |
Abstrakt: |
The present paper presents a comparison of seismic provisions of three seismic design codes, the Philippine code, Eurocode 8 and the American code, to the most common ordinary residential frames of standard occupancy. Regular and irregular reinforced concrete frames were analyzed and compared for four storey building types. The response spectrum and the seismic parameters of NSCP 2010 were considered for the horizontal load action with different load combinations. Response spectrum analysis and equivalent lateral force analysis were performed using SAP2000 software package. Five representative columns for each RC frame structure were analyzed. Based on the results of column axial load - bending moment interaction diagrams, EC8 was found to be conservative when compared to NSCP 2010 and 2009 IBC. The conclusion is that for the design and analysis of ordinary RC residential buildings with certain irregularity, EC8 provisions were considered to be safer. |
Copyright: | © 2013 Jaime Landingin, Hugo Rodrigues, Humberto Varum, António Arêde, Aníbal Costa |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
1.57 MB
- Über diese
Datenseite - Reference-ID
10384630 - Veröffentlicht am:
23.11.2019 - Geändert am:
02.06.2021