Analysis of Deformation Characteristics of Filled Subgrade Treated by Micro-Pile

Deformation control of fill subgrade is a difficult point in the field of highway engineering. This article relies on the treatment project of micro-piles for subgrade deformation of K555 + 070～K557 + 710 section of Qingdao-Yinchuan Expressway. Settlement and stress monitoring was carried out at the toe of the roadbed, the shoulder, and the center of the roadbed. We use Midas/GTS modeling trial calculation. A new method to check the simulation results of the deviation rate is proposed. A calculation model of the stress and deformation of the subgrade in the whole life cycle is established. The results of comparative analysis, monitoring, and simulation are as follows. ① The compression and consolidation of the fill account for most of the settlement and deformation of the roadbed in the whole life cycle. ② Subgrade center settlement is the sensitive part of subgrade deformation. ③ After piles are added, the deformation extremes at the toe of the slope, the shoulder, and the center of the roadbed are all reduced by more than 96%. The research results can provide theoretical guidance for the analysis of the stress and deformation characteristics of the subgrade before and after the micro-pile treatment.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.