Key Findings from Serviceability Studies on Aluminum Footbridges

Due to their light weight and low intrinsic damping, aluminum footbridges under human-induced excitations are susceptible to excessive vibrations, which may result in serviceability failures. In general, the design provisions for the serviceability of such lively footbridges employ a basic moving load model representing a single pedestrian walking and simulate the crowd-induced vibration of footbridges from the single pedestrian load model through multiplication factors. Despite being adopted into most codes and guidelines, there is still a need for experimental investigations to understand and validate the performance of these design load models. To this end, a comprehensive experimental program was undertaken by the authors on three full-scale aluminum footbridges, both in the field and in the laboratory. These bridges were instrumented and subjected to a range of modal and pedestrian walking tests of varying traffic sizes. The comparison results between the predicted and measured responses show that commonly employed load models can sometimes be un-conservative. Recommendations are proposed to harmonize various design provisions and with measurements based on results already available in the literature. Additionally, the guidelines are evaluated in a reliability-based framework to incorporate the potential uncertainties associated with the walking loads, structural properties, and occupant comfort limits. The key results point towards calibrating the current design provisions to a higher reliability index under the design events in order to achieve sufficiency under the non-frequent loading conditions. The study also suggests adopting traffic dependent comfort limits for economic designs.

This creative work is copyrighted. The copyright holder(s) do(es) not grant any usage rights other than viewing and downloading the work for personal use. Further copying or publication requires the permission of the copyright holder(s).