Influence of Anchor Length and Drilled Hole on Mechanical Behaviour of Masonry Column Structures Strengthened with Bonded Anchor
|
|
|||||||||||
Bibliographic Details
| Author(s): |
Daisuke Sasaki
(Kumamoto University, Kumamoto, JAPAN)
Hitoshi Moriyama (Kumamoto University, Kumamoto, JAPAN) Zice Qin (Kumamoto University, Kumamoto, JAPAN) Masahide Matsumura (Kumamoto University, Kumamoto, JAPAN) |
||||
|---|---|---|---|---|---|
| Medium: | conference paper | ||||
| Language(s): | English | ||||
| Conference: | IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022 | ||||
| Published in: | IABSE Symposium Prague 2022 | ||||
|
|||||
| Page(s): | 1204-1211 | ||||
| Total no. of pages: | 8 | ||||
| DOI: | 10.2749/prague.2022.1204 | ||||
| Abstract: |
Masonry structures like stone lanterns are collapsed by lateral forces and cracked by deterioration. Some of them should be repaired without changing their original appearance as heritage structures. One way to solve the problems is bonded anchoring, but the design criteria are not established in Japan. Therefore, this paper conducted pull-out tests to investigate the mechanical behaviour of strengthened parts with a bonded anchor. The maximum load and stiffness in load versus pull-out displacement were proportional to embedment length in any failure modes, whereas they did not vary by drilled-hole diameter. Three modes; cone failure, combined failure of cone and pull-out failure, and split failure were confirmed. Since the split failure occurred regardless of embedment length and drilled hole diameter, it seems to be related to initial cracks or compositions and uneven distribution of composed minerals and particles in the strengthened stone. |
||||
| Keywords: |
pull-out tests bonded anchor Masonry Column Structures Ultimate Resistance
|
||||
| Copyright: | © 2022 International Association for Bridge and Structural Engineering (IABSE) | ||||
| License: | This creative work is copyrighted material and may not be used without explicit approval by the author and/or copyright owner. |
||||