Qingxin Zhao 
- (2024): The role of Al2O3, MgO and CaO in promoting Cl- uptake by hydrotalcite-like phases in alkali-activated binders with MSWI FA. In: Construction and Building Materials, v. 439 (August 2024).
- (2024): Strengthening the fiber-cement matrix interface by introducing functional groups on fiber surface. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Preparation of calcium sulphoaluminate cement-Portland cement-gypsum based sleeve grouting material: Performance optimization and tensile properties of sleeve connector. In: Construction and Building Materials, v. 418 (March 2024).
- (2024): A novel coal gasification coarse slag-based geopolymer: Influences of physico-chemical coupling activation on its properties, microstructure, and hazardous material immobilization. In: Construction and Building Materials, v. 420 (March 2024).
- (2024): Preparation and mix proportion optimization of red mud-fly ash-based cementitious material synergistic activated by carbide slag and MSWIFA. In: Construction and Building Materials, v. 415 (February 2024).
- (2023): Laboratory investigation of solid wastes combined with tunnel slag in cement stabilized base of asphalt pavement. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Performance deterioration of municipal solid waste incineration fly ash-based geopolymer under sulfuric acid attack. In: Construction and Building Materials, v. 391 (August 2023).
- (2023): Strength formation mechanism and curing system optimization of low-carbon cementitious materials prepared by synergistic activation of multiple alkaline solid wastes. In: Construction and Building Materials, v. 402 (October 2023).
- (2023): An intelligent design method for new binder material activated by solid wastes by integrating attention-based tree model and heuristic optimization algorithm. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Preparation of foam concrete from solid wastes: Physical properties and foam stability. In: Construction and Building Materials, v. 408 (December 2023).
- (2023): Properties and mechanism of Cu(OH)2 nanoarray reinforced cement composites. In: Construction and Building Materials, v. 408 (December 2023).
- (2024): Preparation of low-carbon and environmentally friendly non-sintered ceramsite (NSC) employing steel slag, GGBS and fly ash: Experiment and performance regulation. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Investigation of various curing methods on the properties of red mud-calcium carbide slag-based artificial lightweight aggregate ceramsite fabricated through alkali-activated cold-bonded pelletization technology. In: Construction and Building Materials, v. 401 (October 2023).
- (2023): A numerical framework for the ITZ percolation, effective fraction and diffusivity of concrete systems considering the nonuniform ITZ. In: Journal of Building Engineering, v. 77 (October 2023).
- (2023): A novel binder prepared from municipal solid waste incineration fly ash and phosphogypsum. In: Journal of Building Engineering, v. 71 (July 2023).
- (2023): Preparation and characterization of mortar specimens based on municipal solid waste incineration fly ash-activated slag. In: Journal of Building Engineering, v. 69 (June 2023).
- (2022): Strength development and microstructure of sustainable geopolymers made from alkali-activated ground granulated blast-furnace slag, calcium carbide residue, and red mud. In: Construction and Building Materials, v. 356 (November 2022).
- : Preparation and properties of ultra-high performance lightweight concrete. In: Magazine of Concrete Research.
- (2022): Mechanical properties and compressive constitutive relation of solid waste-based concrete activated by soda residue-carbide slag. In: Construction and Building Materials, v. 333 (May 2022).
- (2022): Strength development and microstructure of recycled gypsum-soda residue-GGBS based geopolymer. In: Construction and Building Materials, v. 331 (May 2022).
- (2022): Stress-strain behavior of low-carbon concrete activated by soda residue-calcium carbide slag under uniaxial and triaxial compression. In: Journal of Building Engineering, v. 55 (September 2022).
- (2021): Mesomechanical creep model of fly ash-contained cement mortar considering the interfacial transition zone and its influential factors. In: Construction and Building Materials, v. 308 (November 2021).
- (2021): Mechanical performance and microstructure improvement of soda residue–carbide slag–ground granulated blast furnace slag binder by optimizing its preparation process and curing method. In: Construction and Building Materials, v. 302 (October 2021).
- (2021): A new analytical solution of vibration response of orthotropic composite plates with two adjacent edges rotationally-restrained and the others free. In: Composite Structures, v. 266 (June 2021).
- (2020): Removal of formaldehyde in urban office building by the integration of ventilation and photocatalyst-coated window. In: Sustainable Cities and Society, v. 55 (April 2020).
- (2021): Mechanical properties and microstructure of binding material using slag-fly ash synergistically activated by wet-basis soda residue-carbide slag. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Study on frost resistance and vegetation performance of seashell waste pervious concrete in cold area. In: Construction and Building Materials, v. 265 (December 2020).
- (2020): Optimal design of building environment with hybrid genetic algorithm, artificial neural network, multivariate regression analysis and fuzzy logic controller. In: Building and Environment, v. 175 (May 2020).
- (2016): Long-age wet curing effect on performance of carbonation resistance of fly ash concrete. In: Construction and Building Materials, v. 127 (November 2016).
- (2017): Investigation of carbon fillers modified electrically conductive concrete as grounding electrodes for transmission towers: Computational model and case study. In: Construction and Building Materials, v. 145 (August 2017).
Structurae cooperates with
