Qingxin Zhao 
- (2024): A comprehensive review of multisource solid wastes in sustainable concrete: From material properties to engineering application. In: Construction and Building Materials, v. 435 (Juli 2024).
- (2024): Comparison of mechanical properties and microstructure of GGBS-based cementitious materials activated by different combined alkaline wastes. In: Construction and Building Materials, v. 422 (April 2024).
- (2024): Experimental study on performance, hydration, and sustainability of coal gasification coarse slag based geopolymers for sustainable environment. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Feasibility of using pretreated sodium silicate-bonded waste foundry sand as fine aggregates for construction mortar. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2024): Bond behavior between CFRP and steel structures with random corrosion defects. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2023): Experimental study on ultra-early tensile creep of cement paste. In: Construction and Building Materials, v. 371 (März 2023).
- (2023): Enhancement of sintered sludge ash-modified cement paste with CaSO4 and CaCl2. In: Construction and Building Materials, v. 383 (Juni 2023).
- (2023): Laboratory investigation of solid wastes combined with tunnel slag in cement stabilized base of asphalt pavement. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Carbonation depth assessment in shotcrete with various initial damage degrees and accelerator dosages: Experimental study. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Influence of seawater concentration on alkali-silica reaction of seawater sea-sand concrete: Mimicking through NaCl solution and recycled glass aggregate. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): An intelligent design method for new binder material activated by solid wastes by integrating attention-based tree model and heuristic optimization algorithm. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Freeze-thaw resistance performance of alkaline residue-blast slag based low carbon binder material: Supplementary study. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2024): 1H NMR monitoring of dynamic microstructure evolution of HACP during adsorption of different fluids. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): Investigation of various curing methods on the properties of red mud-calcium carbide slag-based artificial lightweight aggregate ceramsite fabricated through alkali-activated cold-bonded pelletization technology. In: Construction and Building Materials, v. 401 (Oktober 2023).
- (2023): Exploring capillary adsorption of corrosive medium in epoxy resin-modified calcium-silicate-hydrate channels. In: Construction and Building Materials, v. 390 (August 2023).
- (2023): Effect of regenerated nano-FeB on mechanical properties of cement paste. In: Construction and Building Materials, v. 366 (Februar 2023).
- (2022): An Accurate Computational Method for Buckling of Orthotropic Composite Plate with Non-Classical Boundary Restraints. In: International Journal of Structural Stability and Dynamics, v. 23, n. 7 (November 2022).
- (2022): Central composite design-based development of eco-efficient high-volume fly ash mortar. In: Construction and Building Materials, v. 358 (Dezember 2022).
- (2022): Effects of various curing methods on the compressive strength and microstructure of blast furnace slag-fly ash-based cementitious material activated by alkaline solid wastes. In: Construction and Building Materials, v. 357 (November 2022).
- (2022): Effect of interfacial transition zone on creep behavior of steel fiber-reinforced concrete. In: Construction and Building Materials, v. 350 (Oktober 2022).
- (2022): Effectiveness of soda residue-activated GGBS as alternative binder on compressive strength and workability of cemented paste backfills: Reuse of multi-source solid wastes. In: Construction and Building Materials, v. 348 (September 2022).
- (2021): Development and characterization of a new multi-strength level binder system using soda residue-carbide slag as composite activator. In: Construction and Building Materials, v. 291 (Juli 2021).
- (2021): High-Volume Fly Ash-Based Cementitious Composites as Sustainable Materials: An Overview of Recent Advances. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2019): Control of a novel synthetical index for the local indoor air quality by the artificial neural network and genetic algorithm. In: Sustainable Cities and Society, v. 51 (November 2019).
- (2019): Experimental research for elastic modulus of cement paste at ultra-early age based on indentation technique. In: Construction and Building Materials, v. 226 (November 2019).
- (2015): Effect of curing temperature on creep behavior of fly ash concrete. In: Construction and Building Materials, v. 96 (Oktober 2015).
- (2016): Effect of fiber types on creep behavior of concrete. In: Construction and Building Materials, v. 105 (Februar 2016).
- (2017): Investigation of carbon fillers modified electrically conductive concrete as grounding electrodes for transmission towers: Computational model and case study. In: Construction and Building Materials, v. 145 (August 2017).
- (2017): Experimental and numerical investigation of scattering gravels on the surface bond strength of self-compacting concrete. In: Construction and Building Materials, v. 145 (August 2017).
- (2007): Effects of fiber curvature on the microstructure of the interfacial transition zone in fresh concrete. In: Frontiers of Architecture and Civil Engineering in China, v. 1, n. 1 (Februar 2007).
Structurae kooperiert mit
