Hua Zhao 
- (2024): Experimental study on the static properties of bamboo fiber reinforced ultra-high performance concrete (UHPC). In: Construction and Building Materials, v. 453 (November 2024).
- (2024): Bamboo fiber-enhanced UHPC: Early hydration and microstructural/mesoscale analysis. In: Construction and Building Materials, v. 450 (November 2024).
- (2024): Effect of silicon carbide powder on asphalt material properties and microwave-induced self-healing. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Experimental Study on Axial Compressive Performance of Recycled Steel Fiber Reinforced Concrete Short Columns with Steel Pipes. In: Buildings, v. 14, n. 8 (23 July 2024).
- (2024): Experimental and numerical investigation on deck system of a 102 m simply supported prestressed UHPC box-girder highway bridge. In: Engineering Structures, v. 316 (October 2024).
- (2024): Concept and flexural performance of non-prestressed steel plate-UHPC-NC composite girder bridge. In: Engineering Structures, v. 315 (September 2024).
- (2024): Experimental Study on the Mechanical Properties of Recycled Spiral Steel Fiber-Reinforced Rubber Concrete. In: Buildings, v. 14, n. 4 (27 March 2024).
- (2023): Assessing indoor PM2.5 microbial activity in a university campus environments in Beijing. In: Building and Environment, v. 246 (December 2023).
- (2023): Flexural Behavior on a Steel–UHPC Composite Deck System of Long-Span Bridges. In: Journal of Bridge Engineering (ASCE), v. 28, n. 9 (September 2023).
- (2023): Exploring Time-Varying Characteristics in Drive-By Bridge Frequency Extraction with the Second-Order Synchrosqueezing Transform. In: Journal of Bridge Engineering (ASCE), v. 28, n. 4 (April 2023).
- (2023): An Extended Bridge Weigh-in-Motion System without Vehicular Axles and Speed Detectors Using Nonnegative LASSO Regularization. In: Journal of Bridge Engineering (ASCE), v. 28, n. 5 (May 2023).
- (2022): Experimental and numerical study of shear-lag effect on low-ribbed steel-UHPC composite structure. In: Structures, v. 46 (December 2022).
- (2022): Enhancing self-healing properties of microcrack on aged asphalt incorporating with microcapsules encapsulating rejuvenator. In: Construction and Building Materials, v. 344 (August 2022).
- (2021): Effect of aggregate type and polishing level on the long-term skid resistance of thin friction course. In: Construction and Building Materials, v. 282 (May 2021).
- (2022): Cyclic behavior of concrete-filled square tubular columns with stiffened plastic hinge region. In: Journal of Constructional Steel Research, v. 190 (March 2022).
- (2022): Developing Digital Twins to Characterize Bridge Behavior Using Measurements Taken under Random Traffic. In: Journal of Bridge Engineering (ASCE), v. 27, n. 1 (January 2022).
- (2020): Effect of a Ti alloy layer on CFRP hole quality during helical milling of CFRP/Ti laminate. In: Composite Structures, v. 252 (November 2020).
- (2021): Extracting mode shapes from drive-by measurements to detect global and local damage in bridges. In: Structure and Infrastructure Engineering, v. 17, n. 11 (September 2021).
- (2020): A filtering-based bridge weigh-in-motion system on a continuous multi-girder bridge considering the influence lines of different lanes. In: Frontiers of Structural and Civil Engineering, v. 14, n. 5 (August 2020).
- (2020): Axial compressive behaviour of concrete strengthened with steel rings, wire mesh and modified high strength mortar (MHSM). In: Construction and Building Materials, v. 250 (July 2020).
- (2012): Conceptual design of new super-span cable-stayed bridge. Presented at: 18th IABSE Congress: Innovative Infrastructures – Towards Human Urbanism, Seoul, Korea, 19-21 September 2012.
- (2004): An Analysis of the Ultimate Load Bearing Capacity of Reinforced Concrete Arch Bridges. Presented at: IABSE Symposium: Metropolitan Habitats and Infrastructure, Shanghai, China, 22-24 September 2004.
- (2011): Experimental Study of High-Strength Concrete Columns Confined with Different Types of Mesh under Eccentric and Concentric Loads. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 6 (June 2011).
- (2010): Experimental Research on and Application of Twice-Prestressed Concrete Beam. In: Advances in Structural Engineering, v. 13, n. 2 (April 2010).
- (2015): Field-calibrated influence lines for improved axle weight identification with a bridge weigh-in-motion system. In: Structure and Infrastructure Engineering, v. 11, n. 6 (May 2015).
- (2017): Comprehensive stress-strain model of square steel tube stub columns under compression. In: Engineering Structures, v. 131 (January 2017).
- (2013): Basic Performance of the Composite Deck System Composed of Orthotropic Steel Deck and Ultrathin RPC Layer. In: Journal of Bridge Engineering (ASCE), v. 18, n. 5 (May 2013).
- (2005): Design and Experimental Study of a Harp-Shaped Single Span Cable-Stayed Bridge. In: Journal of Bridge Engineering (ASCE), v. 10, n. 6 (November 2005).
- (2010): Experimental Study on Multicantilever Prestressed Composite Beams with Corrugated Steel Webs. In: Journal of Structural Engineering (ASCE), v. 136, n. 9 (September 2010).
- (2011): Hyperbolic tower of a multi-span cable-stayed bridge. Presented at: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011.
Structurae cooperates with
