Zhidong Zhang 
- (2024): Carbonated recycled concrete aggregates in construction: potential and bottlenecks identified by RILEM TC 309-MCP. In: Materials and Structures, v. 58, n. 1 (26 December 2024).
- (2024): Effect of accelerated carbonation on long-term water absorption behavior of cement-based materials. In: Materials and Structures, v. 58, n. 1 (26 December 2024).
- (2024): Effect of external loads on chloride ingress into concrete: A state-of-the-art review. In: Construction and Building Materials, v. 450 (November 2024).
- (2024): Quantifying isothermal drying of cement mortars in view of water sensitivity. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): Post-buckling behavior and DSM design of cold-formed steel lipped channel columns experiencing local-distortional-global interaction. In: Structures, v. 67 (September 2024).
- (2024): Practice-oriented numerical model for seismic response of cold-formed steel-framed mid-rise buildings. In: Engineering Structures, v. 319 (November 2024).
- (2024): Seismic performance of cold-formed steel shear walls with a shear plate of low-yield steel. In: Journal of Building Engineering, v. 88 (July 2024).
- (2023): Physical damage‐hysteretic response correlation for steel sheet sheathed cold‐formed steel‐framed wall‐lines. In: Earthquake Engineering and Structural Dynamics, v. 53, n. 3 (December 2023).
- (2023): Digital Twin-Based Numerical Simulation Method for Cee-Shape Cold-Formed Steel Members. In: Buildings, v. 13, n. 9 (23 August 2023).
- (2024): Design recommendation of cold-formed steel built-up sections under concentric and eccentric compression. In: Journal of Constructional Steel Research, v. 212 (January 2024).
- (2023): Three-fold benefits of using CO2 to cure seawater sea sand concrete. In: Construction and Building Materials, v. 401 (October 2023).
- (2023): A novel MXene-based high-performance flexible pressure sensor for detection of human motion. In: Smart Materials and Structures, v. 32, n. 6 (21 April 2023).
- (2015): Numerical modelling of moisture transfers with hysteresis within cementitious materials: Verification and investigation of the effects of repeated wetting–drying boundary conditions. In: Cement and Concrete Research, v. 68 (February 2015).
- (2014): A review and statistical study of existing hysteresis models for cementitious materials. In: Cement and Concrete Research, v. 57 (March 2014).
- (2016): Investigation of moisture transport properties of cementitious materials. In: Cement and Concrete Research, v. 89 (November 2016).
- (2018): Morphology of cementitious material during early hydration. In: Cement and Concrete Research, v. 107 (May 2018).
- (2023): Corrosion of steel rebar in concrete induced by chloride ions under natural environments. In: Construction and Building Materials, v. 369 (March 2023).
- (2022): Steel Sheet Sheathed Cold-Formed Steel Framed In-line Wall Systems. II: Impact of Nonstructural Detailing. In: Journal of Structural Engineering (ASCE), v. 148, n. 12 (December 2022).
- (2022): Steel Sheet Sheathed Cold-Formed Steel Framed In-line Wall Systems. I: Impact of Structural Detailing. In: Journal of Structural Engineering (ASCE), v. 148, n. 12 (December 2022).
- (2021): Characterization of the fatigue behavior of asphalt mixture under full support using a Wheel-tracking Device. In: Construction and Building Materials, v. 277 (March 2021).
- (2022): Spatiotemporal Analysis of Influencing Factors of Carbon Emission in Public Buildings in China. In: Buildings, v. 12, n. 4 (11 April 2022).
- (2021): Cyclic experiments on isolated steel sheet connections for CFS framed steel sheet sheathed shear walls with new configurations. In: Engineering Structures, v. 244 (October 2021).
- (2021): Design and evaluation of high–luminance porous asphalt mixtures based on wasted glass for sponge city. In: Construction and Building Materials, v. 273 (March 2021).
- (2012): A Comparison of Indoor Environmental Satisfaction Between Two Green Buildings and a Conventional Building in China. In: Journal of Green Building, v. 7, n. 2 (April 2012).
- (2021): Laboratory Method to Characterize Coarse Aggregate Segregation for HMA. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 1 (January 2021).
- (2015): Microwave absorption and flexural properties of Fe nanoparticle/carbon fiber/epoxy resin composite plates. In: Composite Structures, v. 131 (November 2015).
- (2020): Experimental Investigation on Short Concrete Columns Reinforced by Bamboo Scrimber under Axial Compression Loads. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2019): The kinetic competition between transport and oxidation of ferrous ions governs precipitation of corrosion products in carbonated concrete. In: RILEM Technical Letters, v. 3 (April 2019).
- (2019): Towards smart compaction: Particle movement characteristics from laboratory to the field. In: Construction and Building Materials, v. 218 (September 2019).
- (2018): Determination of water permeability for a moisture transport model with minimized batch effect. In: Construction and Building Materials, v. 191 (December 2018).
Structurae cooperates with
