Yunsheng Zhang 
- (2024): Research on humidity field and freezing resistance of green recycled ceramic internal cured concrete at early age. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): Predicting the impermeability and mechanical properties of manufactured sand polymer waterproof mortar using an optimised back-propagation neural network. In: Construction and Building Materials, v. 441 (August 2024).
- (2024): Reactive molecular dynamics simulations of the initial oxidation and passivation of Fe-Cr alloy steel. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Quantitative surface quality evaluation for 3D-printed concrete with coarse aggregate through 3D scanning. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Study on hydration characteristics and mechanism of recycled powder-cement binary and multivariate systems. In: Construction and Building Materials, v. 420 (March 2024).
- (2024): Prediction of durability of reinforced concrete based on hybrid-Bp neural network. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): A Review of Waterborne Polymer–Cementitious Composite Repair Materials for Application in Saline Soil Environments: Properties and Progress. In: Buildings, v. 14, n. 3 (21 February 2024).
- (2024): Research on Enhancing the Corrosion Resistance of Concrete in a MgSO4 Corrosive Environment Using CTF Synergist. In: KSCE Journal of Civil Engineering, v. 28, n. 4 (January 2024).
- (2023): Pore structure and fractal dimension analysis of ancient city wall bricks in China. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Research on carbon emission reduction of manufactured sand concrete based on compressive strength. In: Construction and Building Materials, v. 403 (November 2023).
- (2023): Research on the green preparation of manufactured sand by tuff produced in Gansu China and its influence on the properties of concrete. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Reactive molecular dynamics study on carbon steel corrosion induced by chloride: Effects of applied potential and temperature. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Review of new methods for resource utilisation of electrolytic manganese residue and its application in building materials. In: Construction and Building Materials, v. 401 (October 2023).
- (2020): Predesigning matrix-directed super-hydrophobization and hierarchical strengthening of cement foam. In: Cement and Concrete Research, v. 131 (May 2020).
- (2023): Study on comprehensive morphological parameters of manufactured sand based on CT scanning and entropy method and its application in rheology of manufactured sand mortar. In: Construction and Building Materials, v. 370 (March 2023).
- (2023): Research on damping properties and microscopic mechanism of polyurethane cement-based composites. In: Construction and Building Materials, v. 365 (February 2023).
- (2022): Short Review on the Application of Recycled Powder in Cement-Based Materials: Preparation, Performance and Activity Excitation. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2022): Study on axial compressive behavior and damage constitutive model of manufactured sand concrete based on fluidity optimization. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Solidification mechanisms of copper in ferrite-rich Portland cement and its action mechanism in mineral phase. In: Journal of Building Engineering, v. 58 (October 2022).
- (2022): Relationship between water transport behaviour and interlayer voids of 3D printed concrete. In: Construction and Building Materials, v. 326 (April 2022).
- (2022): Study on evaluation of elastic modulus of crumb rubber concrete in meso-scale. In: Construction and Building Materials, v. 331 (May 2022).
- (2021): Structural kinetics constitutive models for characterizing the time-dependent rheologic behaviors of fresh cement paste. In: Construction and Building Materials, v. 276 (March 2021).
- (2022): Steel fiber orientational distribution and effects on 3D printed concrete with coarse aggregate. In: Materials and Structures, v. 55, n. 3 (19 March 2022).
- (2021): Study on dynamic and static structural build-up of fresh cement paste with limestone powder based on structural kinetics model. In: Construction and Building Materials, v. 305 (October 2021).
- (2019): Rheological and harden properties of the high-thixotropy 3D printing concrete. In: Construction and Building Materials, v. 201 (March 2019).
- (2014): Solid Phases Percolation and Capillary Pores Depercolation in Hydrating Cement Pastes. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 12 (December 2014).
- (2017): Study of depassivation of carbon steel in simulated concrete pore solution using different equivalent circuits. In: Construction and Building Materials, v. 157 (December 2017).
- (2017): Study on microstructure and bond strength of interfacial transition zone between cement paste and high-performance lightweight aggregates prepared from ferrochromium slag. In: Construction and Building Materials, v. 142 (July 2017).
- (2015): Potential Use of Foamed Mortar (FM) for Thermal Upgrading of Chinese Traditional Hui-Style Residences. In: International Journal of Architectural Heritage, v. 9, n. 7 (November 2015).
- (2005): Short Fiber Reinforced Geopolymer Composites Manufactured by Extrusion. In: Journal of Materials in Civil Engineering (ASCE), v. 17, n. 6 (December 2005).
Structurae cooperates with
