Yunsheng Zhang 
- (2024): Durability enhancement of cement-based repair mortars through waterborne polyurethane modification: Experimental characterization and molecular dynamics simulations. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Correction: In situ visualization of water transport in cement mortar with an ultra-low w/b ratio under the coupling conditions of osmotic pressure, confining pressure, and temperature. In: Materials and Structures, v. 57, n. 7 (13 August 2024).
- (2024): Effect of Load-Temperature-Osmotic Coupling on Chloride Ion Transport in Ultrahigh-Performance Concrete: Experiments and Models. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 10 (Oktober 2024).
- (2024): Development and application of artificial hydraulic lime for Chinese architectural heritage restorations. In: Construction and Building Materials, v. 442 (September 2024).
- (2024): Analysis of damage models and mechanisms of mechanical sand concrete under composite salt freeze–thaw cycles. In: Construction and Building Materials, v. 429 (Mai 2024).
- (2024): Effects of stone powder on microstructure of manufactured-sand concrete and its gas permeability. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Effect of bidirectional electromigration rehabilitation on corroded reinforcement and surrounding concrete in chloride contaminated concrete. In: Journal of Building Engineering, v. 93 (September 2024).
- (2024): Clinkerization of carbonatable belite–melilite clinker using solid waste at low temperature. In: Construction and Building Materials, v. 418 (März 2024).
- (2024): Corrosion characteristics of basalt-polypropylene hybrid fiber concrete under the compound salt and drying-wetting cycles. In: Construction and Building Materials, v. 419 (März 2024).
- (2023): Early-age performance and mechanism of magnesium oxychloride cement mortar mixed with highland barley straw ash. In: Construction and Building Materials, v. 401 (Oktober 2023).
- (2023): Dynamic mechanical properties and constitutive model of specified density concrete reinforced by waste incineration tailings. In: Construction and Building Materials, v. 371 (März 2023).
- (2023): Comparative study on material properties of ancient fired clay bricks of China. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2023): 3D Printed concrete with coarse aggregates: Built‒in‒Stirrup permanent concrete formwork for reinforced columns. In: Journal of Building Engineering, v. 70 (Juli 2023).
- (2018): Application of organic- and nanoparticle-modified foams in foamed concrete: Reinforcement and stabilization mechanisms. In: Cement and Concrete Research, v. 106 (April 2018).
- (2023): Degradation of mortar fully buried in saline soil containing sodium sulfate or magnesium sulfate. In: Construction and Building Materials, v. 369 (März 2023).
- (2023): Effect of multifunctional modification of waste rubber powder on the workability and mechanical behavior of cement-based materials. In: Construction and Building Materials, v. 363 (Januar 2023).
- (2021): Analyzing the filler and activity effect of fly ash and slag on the early hydration of blended cement based on calorimetric test. In: Construction and Building Materials, v. 276 (März 2021).
- (2022): Chloride diffusion behavior and microstructure of basalt-polypropylene hybrid fiber reinforced concrete in salt spray environment. In: Construction and Building Materials, v. 324 (März 2022).
- (2021): Atmospheric drying preparation and microstructure characterization of fly ash aerogel thermal insulation material with superhydrophobic. In: Construction and Building Materials, v. 303 (Oktober 2021).
- (2021): Analytical Equations and Numerical Simulation Describing the Pore and Solid Phase Distributions of Interfacial Transition Zones in Cement-Based Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 3 (März 2021).
- (2020): Damage evolution of cement mortar with high volume slag exposed to sulfate attack. In: Construction and Building Materials, v. 247 (Juni 2020).
- (2020): A comparable study on the deterioration of limestone powder blended cement under sodium sulfate and magnesium sulfate attack at a low temperature. In: Construction and Building Materials, v. 243 (Mai 2020).
- (2020): Effects of fly ash on Portland limestone cement under sulfate attack at low temperature. In: Magazine of Concrete Research, v. 72, n. 3 (Februar 2020).
- (2018): Biomimetic superhydrophobic surface of concrete: Topographic and chemical modification assembly by direct spray. In: Construction and Building Materials, v. 181 (August 2018).
- (2019): Conservation of disappearing traditional manufacturing process for Chinese grey brick: Field survey and laboratory study. In: Construction and Building Materials, v. 212 (Juli 2019).
- (2013): An analytical model for determining the relative electrical resistivity of cement paste and C–S–H gel. In: Construction and Building Materials, v. 48 (November 2013).
- (2014): Continuous tracking of the relationship between resistivity and pore structure of cement pastes. In: Construction and Building Materials, v. 53 (Februar 2014).
- (2016): Corrosion behavior of steel submitted to chloride and sulphate ions in simulated concrete pore solution. In: Construction and Building Materials, v. 115 (Juli 2016).
- (2008): Carbonation depth prediction of fly ash concrete subjected to 2-and 3-dimensional CO2 attack. In: Frontiers of Architecture and Civil Engineering in China, v. 2, n. 4 (Oktober 2008).
- (2008): Cracking resistance performance of super vertical-distance pumped SFRC. In: Frontiers of Architecture and Civil Engineering in China, v. 2, n. 2 (Mai 2008).
Structurae kooperiert mit
