Yunsheng Zhang 
- (2024): Employing sodium alginate to improve corrosion protection of phytic acid conversion coating for steel in chloride-contaminated concrete pore solution. In: Construction and Building Materials, v. 450 (November 2024).
- (2024): Experimental and ReaxFF MD study on Cr10Mo steel passivation in simulated concrete pore solutions. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Influence of pH on passivation of mild steel in simulated concrete pore solution: Electrochemical, ToF-SIMS and ReaxFF study. In: Developments in the Built Environment, v. 19 (Oktober 2024).
- (2024): Gas permeability characteristics of granite-manufactured sand concrete and its numerical simulation using NMR-MIP modified method. In: Construction and Building Materials, v. 431 (Juni 2024).
- (2024): Hydration behavior and cementitious properties of steel slag: From an early age to a long-term. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): An investigation of the source of calcium carbonate from the carbonated Portland cement: Based on the transformation of hydrates. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Experimental study on eco-friendly one-part alkali-activated slag-fly ash-lime composites under CO2 environment: Reaction mechanism and carbon capture capacity. In: Construction and Building Materials, v. 421 (März 2024).
- (2024): Ethylene Vinyl Acetate Copolymer Emulsion-Modified Alkali-Activated Slag Repair Material: Mechanical Strength and Durability Linked to Microstructural Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 7 (Juli 2024).
- (2023): Interlayer adhesion of 3D printed concrete: Influence of layer stacked vertically. In: Construction and Building Materials, v. 399 (Oktober 2023).
- (2023): Influence of gradation on extrusion-based 3D printing concrete with coarse aggregate. In: Construction and Building Materials, v. 403 (November 2023).
- (2024): Improved predictions of permeability properties in cement-based materials: A comparative study of pore size distribution-based models. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): In situ visualization of water transport in cement mortar with an ultra-low w/b ratio under the coupling conditions of osmotic pressure, confining pressure, and temperature. In: Materials and Structures, v. 56, n. 4 (13 April 2023).
- (2023): Investigations on atmospheric carbonation corrosion of concrete structure beam exposed to real marine-environment for 7 years. In: Journal of Building Engineering, v. 71 (Juli 2023).
- (2004): The influence of mineral admixtures on resistance to corrosion of steel bars in green high-performance concrete. In: Cement and Concrete Research, v. 34, n. 10 (Oktober 2004).
- (2022): Investigation on the influence of modified waste rubber powder on the abrasion resistance of concrete. In: Construction and Building Materials, v. 357 (November 2022).
- (2021): Extrusion-based 3D printing concrete with coarse aggregate: Printability and direction-dependent mechanical performance. In: Construction and Building Materials, v. 296 (August 2021).
- (2021): Experimental and Simulation Study of Water Absorption in Unsaturated Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (Dezember 2021).
- (2020): Experimental and molecular dynamics studies on the durability of sustainable cement-based composites: Reinforced by graphene. In: Construction and Building Materials, v. 257 (Oktober 2020).
- (2021): Investigation on preparation and multifunctionality of reduced graphene oxide cement mortar. In: Construction and Building Materials, v. 275 (März 2021).
- (2020): Influence of Initial Damage Degree on the Degradation of Concrete Under Sulfate Attack and Wetting–Drying Cycles. In: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 Januar 2020).
- (2020): Influence of damage degree on the degradation of concrete under freezing-thawing cycles. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Investigation on parameters optimization for gas permeability testing of concrete: Inlet-gas pressure and confining pressure. In: Construction and Building Materials, v. 250 (Juli 2020).
- (2018): In situ observing the erosion process of cement pastes exposed to different sulfate solutions with X-ray computed tomography. In: Construction and Building Materials, v. 176 (Juli 2018).
- (2018): Fresh properties of a novel 3D printing concrete ink. In: Construction and Building Materials, v. 174 (Juni 2018).
- (2018): Influence of coarse fly ash on the performance of foam concrete and its application in high-speed railway roadbeds. In: Construction and Building Materials, v. 170 (Mai 2018).
- (2018): Experimental study on the performance of lime-based low carbon cementitious materials. In: Construction and Building Materials, v. 168 (April 2018).
- (2019): Influence of sodium hydroxide on the performance and hydration of lime-based low carbon cementitious materials. In: Construction and Building Materials, v. 200 (März 2019).
- (2011): In situ continuously monitoring the early age microstructure evolution of cementitious materials using ultrasonic measurement. In: Construction and Building Materials, v. 25, n. 10 (Oktober 2011).
- (2012): Investigation of the influence of curing temperature and silica fume content on setting and hardening process of the blended cement paste by an improved ultrasonic apparatus. In: Construction and Building Materials, v. 33 (August 2012).
- (2018): Hydration kinetics, pore structure, 3D network calcium silicate hydrate, and mechanical behavior of graphene oxide reinforced cement composites. In: Construction and Building Materials, v. 190 (November 2018).
Structurae kooperiert mit
