Lei Zhang 
- (2024): Study on the mechanical properties of hybrid bonding shear connections with shear studs and epoxy mortar layer. In: Structures, v. 70 (December 2024).
- (2024): Thermoregulation Performance and Mechanical Properties of Phase Change Asphalt Mortars. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 8 (August 2024).
- (2024): Tensile behavior of novel column-to-column connection for modular steel construction using high-strength bolts. In: Structures, v. 65 (July 2024).
- (2024): Topological Characterization and Typical Topologies of Disruption Aggregates in Asphalt Mixture. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 7 (July 2024).
- (2024): Testing device for aerodynamic alternating loads on a train cabin. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 247 (April 2024).
- (2024): Study on the underwater anti-explosion mechanism and damage grade prediction of wall panels reinforced by corrugated steel–concrete slab composite structures with different wave heights. In: Structures, v. 60 (February 2024).
- (2021): A Unified Formula for Calculation of Crack Width and Spacing in Reinforced Concrete Beams. In: International Journal of Concrete Structures and Materials, v. 15, n. 1 (7 January 2021).
- : Using data to develop cost-effective battery-swap networks for electric vehicles. In: Proceedings of the Institution of Civil Engineers - Transport.
- (2023): Study on the Performance of Epoxy Asphalt with Different Matrix Asphalt Contents. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 10 (October 2023).
- (2023): Study on the mitigation effect of a new type of connected structure on micro-pressure waves around 400 km/h railway tunnel exit. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 240 (September 2023).
- (2023): Ultrahigh compression-shear ratio of sandwich pentamode metamaterials. In: Composite Structures, v. 322 (October 2023).
- (2023): Thermal regulation mechanism of air-drying shelter to indoor environment of earth buildings located in Turpan basin with extremely dry and hot climate conditions. In: Sustainable Cities and Society, v. 91 (April 2023).
- (2022): Tunable mechanical performance of additively manufactured plate lattice metamaterials with half-open-cell topology. In: Composite Structures, v. 300 (November 2022).
- (2021): Study on the shear performance of adhesive shear connectors in push-out tests. In: Structures, v. 32 (August 2021).
- (2015): Supporting Sustainable Megaregion Development through Optimizing the Impacts of Transportation Investments. In: Journal of Urban Planning and Development, v. 141, n. 4 (December 2015).
- (2020): Synthesis and characterization of calcium alginate-attapulgite composite capsules for long term asphalt self-healing. In: Construction and Building Materials, v. 265 (December 2020).
- (2013): A thermal response method of calculating a soil's thermal properties when backfill material information is unavailable. In: Energy and Buildings, v. 56 (January 2013).
- (2019): Thermal behavior of a vertical green facade and its impact on the indoor and outdoor thermal environment. In: Energy and Buildings, v. 204 (December 2019).
- (2017): Thermal performance of modular GFRP multicellular structures assembled with fire resistant panels. In: Composite Structures, v. 172 (July 2017).
- (2014): Surrogate-Based Optimization of Expensive-to-Evaluate Objective for Optimal Highway Toll Charges in Transportation Network. In: Computer-Aided Civil and Infrastructure Engineering, v. 29, n. 5 (January 2014).
- (2019): Theoretical and Experimental Study on the Bond–Slip Relationship in Prestressed CFST Beams. In: International Journal of Civil Engineering, v. 17, n. 5 (February 2019).
- (2019): Ultrasonic Transducers from Thermal Sprayed Lead-free Piezoelectric Ceramic Coatings for In-situ Structural Monitoring for Pipelines. In: Smart Materials and Structures, v. 28, n. 7 (July 2019).
- (2019): Synthesis and characterization of multi-cavity Ca-alginate capsules used for self-healing in asphalt mixtures. In: Construction and Building Materials, v. 211 (June 2019).
- (2019): Temperature dependence of structural build-up and its relation with hydration kinetics of cement paste. In: Construction and Building Materials, v. 201 (March 2019).
- (2017): Thermal conductivity of cement stabilized earth blocks. In: Construction and Building Materials, v. 151 (October 2017).
- (2016): Using DSR and MSCR tests to characterize high temperature performance of different rubber modified asphalt. In: Construction and Building Materials, v. 127 (November 2016).
- (2003): The Transverse Stresses in Thin-Walled Beams and its Effect on Strength and Stability. In: Advances in Structural Engineering, v. 6, n. 2 (May 2003).
- (2005): Utility-Function Model for Engineering Performance Assessment. In: Journal of Construction Engineering and Management, v. 131, n. 5 (May 2005).
- (2018): Ultimate limit design of composite beams with modular GFRP deck and steel girder. In: Engineering Structures, v. 176 (December 2018).
- (2018): Synthesis and characterization of compartmented Ca-alginate/silica self-healing fibers containing bituminous rejuvenator. In: Construction and Building Materials, v. 190 (November 2018).
Structurae cooperates with
