Jian Zhang 
- (2023): Experimental study on precast concrete columns reinforced with bundled SFCBs under horizontal cyclic loading. In: Journal of Building Engineering, v. 74 (September 2023).
- (2023): Experimental Studies of Extracting Bridge Mode Shapes by Response of a Moving Vehicle. In: Journal of Bridge Engineering (ASCE), v. 28, n. 11 (November 2023).
- (2023): Experimental study on the engineering characteristics of modified silt in the Yellow River alluvial plain. In: Construction and Building Materials, v. 398 (September 2023).
- (2023): Experimental and analytical investigation of square-shaped concrete-filled steel tube columns. In: Journal of Constructional Steel Research, v. 201 (February 2023).
- (2023): Experimental study on wall-protecting mud modification of super-long bored pile in the alluvial plain region of the Yellow River. In: Construction and Building Materials, v. 368 (March 2023).
- (2022): Experimental investigation and numerical simulation for chloride diffusivity of cement paste with elliptical cement particles. In: Construction and Building Materials, v. 337 (June 2022).
- (2021): Evaluation and analysis of the causes of a landslide and treatment measures during the excavation of a tunnel through a soil-rock interface. In: Engineering Failure Analysis, v. 130 (December 2021).
- (2021): Experimental and numerical investigation of the influence of groundwater flow on the borehole heat exchanger performance: A case study from Tangshan, China. In: Energy and Buildings, v. 248 (October 2021).
- (2021): Experimental Study of Water Transfer and Ice Accumulation in Freezing Soils under Different Conditions. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Evaluating the energy impact potential of energy efficiency measures for retrofit applications: A case study with U.S. medium office buildings. In: Building Simulation, v. 14, n. 5 (April 2021).
- (2021): Experimental study on a novel UHPC grout-filled pipe sleeve with mechanical interlocking for large-diameter deformed bars. In: Engineering Structures, v. 226 (January 2021).
- (2021): Experimental study on failure modes and retrofitting method of latticed transmission tower. In: Engineering Structures, v. 226 (January 2021).
- (2020): Experimental Study on the Deformation and Strength Characteristics of Saturated Clay under Cyclic Loading. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2019): Experimental verification of an accessible geographically distributed real‐time hybrid simulation platform. In: Structural Control and Health Monitoring, v. 27, n. 2 (November 2019).
- (2020): Energy dissipation and self‐centering capacities of posttensioning precast segmental ultra‐high performance concrete bridge columns. In: Structural Concrete, v. 21, n. 2 (April 2020).
- (2012): Elastic Distortional Buckling of Singly Symmetric I-shaped Flexural Members With Slender Webs. In: International Journal of Structural Stability and Dynamics, v. 12, n. 2 (March 2012).
- (2015): Experimental and numerical studies on aerodynamic loads on an overhead bridge due to passage of high-speed train. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 140 (May 2015).
- (2008): Empirical models for predicting lateral spreading and evaluation using New Zealand data. In: Bulletin of the New Zealand Society for Earthquake Engineering, v. 41, n. 1 (March 2008).
- (2005): Empirical models for estimating liquefaction-induced lateral spread displacement. In: Soil Dynamics and Earthquake Engineering, v. 25, n. 6 (August 2005).
- (2012): Empirical models for predicting lateral spreading considering the effect of regional seismicity. In: Earthquake Engineering and Engineering Vibration, v. 11, n. 1 (March 2012).
- (2019): Experimental Investigation of Dynamic Characteristics of Subsea Sand-Silt Mixtures. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): Experimental study on damage-controllable rocking walls with resilient corners. In: Magazine of Concrete Research, v. 71, n. 21 (November 2019).
- (2016): Engineering Project Real-time Objective Monitor Based on Grid Management and Buffer Analysis. In: The Open Civil Engineering Journal, v. 10, n. 1 (December 2016).
- (2017): Experimental study on concrete columns reinforced by hybrid steel-fiber reinforced polymer (FRP) bars under horizontal cyclic loading. In: Construction and Building Materials, v. 130 (January 2017).
- (2016): Experimental investigation of size effect on mechanical properties of carbon fiber reinforced polymer (CFRP) confined concrete circular specimens. In: Construction and Building Materials, v. 127 (November 2016).
- (2009): Evaluating effectiveness and optimum design of isolation devices for highway bridges using the fragility function method. In: Engineering Structures, v. 31, n. 8 (August 2009).
- (2018): Elastic-plastic buckling of deep sea spherical pressure hulls. In: Marine Structures, v. 57 (January 2018).
- (2018): An explicit analytical model for seismic performance of an unbonded post-tensioned precast segmental rocking hollow pier. In: Engineering Structures, v. 161 (April 2018).
- (2008): Experimental verification of the support vector regression based structural identification method by using shaking table test data. In: Structural Control and Health Monitoring, v. 15, n. 4 (June 2008).
- (2017): Experimental Study of Thermal Effects on a Long-Span Suspension Bridge. In: Journal of Bridge Engineering (ASCE), v. 22, n. 7 (July 2017).
Structurae cooperates with
