Jian Zhang 
- (2024): Design and performance evaluation of toroidal TLCDs in bidirectional seismic control of structures using a modified dynamic model. In: Structures, v. 69 (November 2024).
- (2024): Dual room temperature target controlof district heating substation based on room temperature detection. In: Energy and Buildings, v. 318 (September 2024).
- (2024): Dynamic Response Analysis Method of a High-Strength RC Beam Subjected to Long-Duration Blast Loading. In: Buildings, v. 14, n. 6 (19 June 2024).
- (2018): Dynamic crushing behavior and energy absorption of graded lattice cylindrical structure under axial impact load. In: Thin-Walled Structures, v. 127 (June 2018).
- (2024): Determination of Reduction Factor of Shear Key Configurations for Calculating Direct Shear Strength of Precast Concrete Dry Joints Using Parametric Finite-Element Simulations. In: Journal of Bridge Engineering (ASCE), v. 29, n. 7 (July 2024).
- (2024): Detecting deck damage in concrete box girder bridges using mode shapes constructed from a moving vehicle. In: Engineering Structures, v. 305 (April 2024).
- (2024): Data-driven model to predict the residual drift of precast concrete columns. In: Journal of Building Engineering, v. 85 (May 2024).
- (2023): Dynamic mechanical properties, interface structure evolution and deformation behaviors of PVA-carbon fiber reinforced concrete with negative Poisson’s ratio design. In: Construction and Building Materials, v. 391 (August 2023).
- (2022): Dynamic p-y curves for vertical and batter pile groups in liquefied sand. In: Earthquake Engineering and Engineering Vibration, v. 21, n. 3 (25 June 2022).
- (2023): Dimer acid polyamide/montmorillonite bio-based film for the challenge of air cushion. In: Green Materials, v. 11, n. 1 (1 March 2023).
- (2022): Direct Shear Strength Prediction for Precast Concrete Joints Using the Machine Learning Method. In: Journal of Bridge Engineering (ASCE), v. 27, n. 5 (May 2022).
- (2022): Determining Orders of Modes Sensitive to Hinge Joint Damage in Assembled Hollow Slab Bridges. In: Journal of Bridge Engineering (ASCE), v. 27, n. 3 (March 2022).
- (2022): Effect of A Novel Shrinkage-reducing Polycarboxylate Superplasticizer on Plastic Shrinkage Cracking of Mortars. In: Magazine of Concrete Research, v. 74, n. 11 (June 2022).
- (2022): Development of testing and evaluation protocol for occupancy sensing technologies in building HVAC control: A case study of representative people counting sensors. In: Building and Environment, v. 208 (January 2022).
- (2022): Detecting Hinge Joint Damage in Hollow Slab Bridges Using Mode Shapes Extracted from Vehicle Response. In: Journal of Performance of Constructed Facilities (ASCE), v. 36, n. 1 (February 2022).
- (2021): Damage quantification of beam structures using deflection influence line changes and sparse regularization. In: Advances in Structural Engineering, v. 24, n. 9 (February 2021).
- (2019): Design criterion for the self-centering capacity of precast segmental UHPC bridge columns with unbonded post-tensioning tendons. In: Engineering Structures, v. 200 (December 2019).
- (2010): Development of Artificial Neural Network based heat convection algorithm for thermal simulation of large rectangular cross-sectional area Earth-to-Air Heat Exchangers. In: Energy and Buildings, v. 42, n. 4 (April 2010).
- (2013): Developments and applications of a modified wall function for boundary layer flow simulations. In: Wind & Structures, v. 17, n. 4 (October 2013).
- (2020): Deep learning for data anomaly detection and data compression of a long‐span suspension bridge. In: Computer-Aided Civil and Infrastructure Engineering, v. 35, n. 7 (April 2020).
- (2018): Design of high performance concrete with multiple performance requirements for #2 Dongting Lake Bridge. In: Construction and Building Materials, v. 165 (March 2018).
- (2009): Dimensional analysis of structures with translating and rocking foundations under near-fault ground motions. In: Soil Dynamics and Earthquake Engineering, v. 29, n. 10 (October 2009).
- (2010): Earthquake-induced landslide displacement attenuation models and application in probabilistic seismic landslide displacement analysis. In: Earthquake Engineering and Engineering Vibration, v. 9, n. 2 (June 2010).
- (2018): Deflection distribution estimation of tied-arch bridges using long-gauge strain measurements. In: Structural Control and Health Monitoring, v. 25, n. 3 (March 2018).
- (2017): Durability of alkali-activated materials in aggressive environments: A review on recent studies. In: Construction and Building Materials, v. 152 (October 2017).
- (2017): Development and validation of p-y modeling approach for seismic response predictions of highway bridges. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 4 (10 April 2017).
- (2017): Dimensional Analysis of Inelastic Structures with Negative Stiffness and Supplemental Damping Devices. In: Journal of Structural Engineering (ASCE), v. 143, n. 3 (March 2017).
- (2018): Dimensional Estimation of Residual-Drift Demands for Bilinear Bridges under Near-Fault Ground Motions. In: Journal of Bridge Engineering (ASCE), v. 23, n. 11 (November 2018).
- (2012): Early-Age Temperature and Strain in Basement Concrete Walls: Field Monitoring and Numerical Modeling. In: Journal of Performance of Constructed Facilities (ASCE), v. 26, n. 6 (December 2012).
- (2018): Design and Optimization of Seismic Isolation and Damping Devices for Highway Bridges Based on Probabilistic Repair Cost Ratio. In: Journal of Structural Engineering (ASCE), v. 144, n. 8 (August 2018).
Structurae cooperates with
