Young-Soo Yoon
- (2024): Reinforcing effect of CNT on the microstructure and creep properties of high-strength lightweight concrete. In: Construction and Building Materials, v. 428 (May 2024).
- (2004): Genetic algorithm in mix proportioning of high-performance concrete. In: Cement and Concrete Research, v. 34, n. 3 (March 2004).
- (2022): Evacuation of Shelter in Place at Subway Transfer Stations Based on BIM and Proposal of a Strengthening Method. In: Buildings, v. 12, n. 11 (27 October 2022).
- (2022): Evaluation of residual bond behavior of CFRP and steel bars embedded in UHPC after exposure to elevated temperature. In: Journal of Building Engineering, v. 56 (September 2022).
- (2015): Flexural response of steel-fiber-reinforced concrete beams: Effects of strength, fiber content, and strain-rate. In: Cement and Concrete Composites, v. 64 (November 2015).
- (2015): Response of ultra-high-performance fiber-reinforced concrete beams with continuous steel reinforcement subjected to low-velocity impact loading. In: Composite Structures, v. 126 (August 2015).
- (2015): Local bond-slip response of GFRP rebar in ultra-high-performance fiber-reinforced concrete. In: Composite Structures, v. 120 (February 2015).
- (2017): Impact Resistance of Reinforced Ultra-High-Performance Concrete Beams with Different Steel Fibers. In: ACI Structural Journal, v. 114, n. 1 (January 2017).
- (2018): Enhancing the resistance of prestressed concrete sleepers to multiple impacts using steel fibers. In: Construction and Building Materials, v. 166 (March 2018).
- (2016): Numerical Assessment of Reinforcing Details in Beam-Column Joints on Blast Resistance. In: International Journal of Concrete Structures and Materials, v. 10, n. 1 (March 2016).
- (2009): Rheological Approaches on Prediction of Time-dependent Behaviors for Concrete Used in FCM Bridges of Korea. Presented at: IABSE Symposium: Sustainable Infrastructure - Environment Friendly, Safe and Resource Efficient, Bangkok, Thailand, 9-11 September 2009.
- (2009): Practical Use of 60 MPa Cast-in-Placing High-Strength Concrete for PSC Bridges. Presented at: IABSE Symposium: Sustainable Infrastructure - Environment Friendly, Safe and Resource Efficient, Bangkok, Thailand, 9-11 September 2009.
- (2009): Modified Harmony Search Algorithm and Neural Networks for Concrete Mix Proportion Design. In: Journal of Computing in Civil Engineering, v. 23, n. 1 (January 2009).
- (2015): Predicting the post-cracking behavior of normal- and high-strength steel-fiber-reinforced concrete beams. In: Construction and Building Materials, v. 93 (September 2015).
- (2017): Geometrical and boundary condition effects on restrained shrinkage behavior of UHPFRC slabs. In: KSCE Journal of Civil Engineering, v. 22, n. 1 (April 2017).
- (2017): Mechanical Properties of Steam Cured High-Strength Steel Fiber-Reinforced Concrete with High-Volume Blast Furnace Slag. In: International Journal of Concrete Structures and Materials, v. 11, n. 2 (June 2017).
- (2012): A new heuristic algorithm for mix design of high-performance concrete. In: KSCE Journal of Civil Engineering, v. 16, n. 6 (September 2012).
- (2014): Influence of ring size on the restrained shrinkage behavior of ultra high performance fiber reinforced concrete. In: Materials and Structures, v. 47, n. 7 (July 2014).
- (2016): Mechanical behaviour of concrete with amorphous metallic and steel fibres. In: Magazine of Concrete Research, v. 68, n. 24 (December 2016).
- (2012): Prediction of effective compressive strength of corner columns comprising weaker slab–column joint. In: Magazine of Concrete Research, v. 64, n. 12 (December 2012).
- (2011): Rheological concrete creep prediction model for prestressed concrete bridges constructed by the free cantilever method. In: Magazine of Concrete Research, v. 63, n. 9 (September 2011).
- (1995): Estimating period ratio for predicting torsional coupling. In: Engineering Structures, v. 17, n. 1 (January 1995).
- (2017): Feasibility of replacing minimum shear reinforcement with steel fibers for sustainable high-strength concrete beams. In: Engineering Structures, v. 147 (September 2017).
- (2016): Flexural behavior of ultra-high-performance fiber-reinforced concrete beams reinforced with GFRP and steel rebars. In: Engineering Structures, v. 111 (March 2016).
- (2016): Enhancing the performance of UHSC columns intersected by weaker slabs. In: Engineering Structures, v. 127 (November 2016).
- (2017): Experimental and numerical study on flexural behavior of ultra-high-performance fiber-reinforced concrete beams with low reinforcement ratios. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 44, n. 1 (January 2017).
- (2016): Mitigating early-age cracking in thin UHPFRC precast concrete products using shrinkage-reducing admixtures. In: PCI Journal, v. 61, n. 1 (January 2016).
- (2011): Full-Scale Testing of Pretensioned High-Strength Concrete Girders with Debonded Strands. In: Journal of Bridge Engineering (ASCE), v. 16, n. 6 (November 2011).
- (2012): Influence of Steel Fibers and Headed Bars on the Serviceability of High-Strength Concrete Corbels. In: Journal of Structural Engineering (ASCE), v. 138, n. 1 (January 2012).
- (2016): A Review on Structural Behavior, Design, and Application of Ultra-High-Performance Fiber-Reinforced Concrete. In: International Journal of Concrete Structures and Materials, v. 10, n. 2 (June 2016).
Structurae cooperates with
